The structure of CeAlO3 by Rietveld refinement of X-ray powder diffraction data

The room temperature structure of perovskite CeAlO₃ has been reinvestigated by X-ray powder diffraction. The Rietveld refinement has confirmed the tetragonal symmetry; but revealed a super cell, a=5.32489(6) Å and c=7.58976(10) Å, with the space group I4/mcm. In CeAlO₃, the distortion from the ideal cubic perovskite is caused by the cooperative tilting of the AlO₆ octahedra around the primitive cubic [001]_p-axis.     

Synthese und Eigenschaften von Sr3Mo1.5Zn0.5O7‐δ, einer Phase mit perowskitverwandter Schichtstruktur

Synthesis and Properties of the Layered Perovskite Phase Sr₃Mo_1.5Zn_0.5O_7‐δ The new layered perovskite phase Sr₃Mo_1.5Zn_0.5O_7‐δ was synthesized by solid state reaction using a Zn/ZnO oxygen buffer. The crystal structure was refined from X‐ray powder pattern by the Rietveld method. The compound crystallizes tetragonal in the space group I4/mmm (no. 139) with the lattice parameters a = 3.9631(3) Å, c = 20.583(1) Å. An oxygen deficiency corresponding to δ ≈ 0.25 was determinated, indicating the presence of molybdenum in mixed valence (Mo⁴⁺ and Mo⁶⁺).     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.     

Energetics of magnesium, strontium, and barium doped lanthanum gallate perovskites

LaGaO₃ perovskites doped with Sr or Ba at the La site and Mg at the Ga site were prepared by solid-state reaction or sol-gel method and characterized. Enthalpies of formation from constituent oxides at 298 K were determined by high-temperature oxide melt solution calorimetry. Energetic trends are discussed in terms of defect chemistry. As oxygen deficiency increases, formation enthalpies define three trends, LaGa_1−yMg_yO_3−δ (LGM), La_1−xSr_xGa_1−yMg_yO_3−δ (LSGM), and La_1−xBa_xGa_1−yMg_yO_3−δ (LBGM). They become less exothermic with increasing doping, suggesting a dominant destabilization effect from oxygen vacancies. The endothermic enthalpy of vacancy formation is 275±37, 166±18 and 138±12 kJ/mol of V_O^·· for LGM, LBGM and LSGM, respectively. Tolerance factor and ion size mismatch also affect enthalpies. In terms of energetics, Sr is the best dopant for the La site and Mg for the Ga site, supporting earlier studies, including oxygen ion conductivity and computer modeling.     

Bond-length fluctuations in transition-metal oxoperovskites

Bond-length fluctuations in transition-metal oxoperovskites may give rise to two-phase fluctuations in what appears to be a single phase to a diffraction experiment. Orbital disorder at Jahn-Teller ions results in bond-length fluctuations that give 3D-ferromagnetic, vibronic Mn(III)-O-Mn(III) superexchange interactions and allow disproportionation into Mn(IV) and Mn(II) in LaMnO₃; where orbitally ordered and disordered phases coexist, an external magnetic field stabilizes the orbitally disordered, ferromagnetic phase relative to the orbitally ordered, antiferromagnetic phase. Spin-lattice interactions in the paramagnetic phase of charge-transfer compounds give bond-length fluctuations arising from the semicovalent component of the superexchange interactions. At the crossover from localized to itinerant electronic behavior, the coexistence of two-phase fluctuations has been demonstrated in both the single-valent RNiO₃ family (R=rare-earth, A=alkaline-earth) and the mixed-valent R_0.5A_0.5MnO₃ perovskites. “Bad-metal” behavior is found to be associated with bond-length fluctuations.     

Crystal structures and phase transition in the system SrTiO3-La2/3TiO3

The distribution of A-site cations in the perovskite system La_xSr_1−3x/2TiO₃ depends on the concentration of La³⁺ ions and associated vacancies. For small x (x?0.2), the substitutions are expected to be random. For x?0.55, the cations are ordered in such a way that successive layers of A-sites are occupied to greater and lesser degree, and this ordering drives a tetragonal distortion. For x from about 0.3 to 0.5, the X-ray patterns show diffuse peaks indicative of similar ordering, but this is not long-range order and no tetragonal distortion results. The lower temperature structures also exhibit out-of-phase tilting of the TiO₆ octahedra, setting in at temperatures varying linearly with composition from 105 K for x=0, to about 650 K at x=2/3.     

Conventional hydrothermal process versus microwave-assisted hydrothermal synthesis of La1−xAgxMnO3+δ (x = 0, 0.2) perovskites used in methane combustion

A study on the synthesis of La_1−xAg_xMnO_3+δ (x = 0, 0.2) using a microwave process (MWhyd) has been carried out by comparing the heating time and reaction temperature with the same factor under conventional thermal process (CHhyd). Experiments have been conducted using the hydrothermal method at medium pressure (T = 200 °C, P = 20 atm) followed by a thermal treatment of the precursor at 700 °C (10 h).Structural and physico-chemical properties of the catalysts were investigated using X-ray diffraction (XRD), BET sorption, temperature-programmed reduction or desorption, mass spectrometry (TPR-MS and TPD-MS), and X-ray photoelectron spectroscopy (XPS). While CHhyd and MWhyd powder catalysts exhibited the same XRD patterns indexed as pure perovskite structure, their surface physico-chemical properties were found to be strongly influenced by the preparation method. The effect of the nature of oxygen species, their amount and mobility, evidenced by temperature programmed experiments, on the catalytic properties in methane combustion in the presence and in the absence of hydrogen sulphide has been studied. MWhyd-La_0.8Ag_0.2MnO_3+δ catalysts were found to exhibit a much better performance in methane combustion together with higher resistance to sulphur poisoning than CHhyd catalysts.     

Inverse Perovskites (Eu3O)E with E = Sn,In – Preparation,Crystal Structures and Physical Properties

The cubic inverse Perovskites (Eu₃O)In and (Eu₃O)Sn were prepared from the metals and Eu₂O₃ or SnO₂, respectively. For (Eu₃O)In the crystal structure analysis was performed on single crystal X‐ray diffraction data (space group , a = 512.79(3) pm, Z = 1, R_gt(F) = 0.022, wR(F²) = 0.044). The data indicated full occupancy on all sites and a fully ordered structure. According to magnetic susceptibility measurements and X‐ray absorption spectroscopic data at the Eu L_III edge both compounds contain europium in the 4f⁷ (Eu²⁺) electronic state. (Eu₃O)In orders ferromagnetically at 185(5) K, (Eu₃O)Sn shows antiferromagnetic order at 31.4(2) K. Both compounds behave as metallic conductors in electrical resistivity measurements. However, (Eu₃O)In may be classified a metal, while (Eu₃O)Sn is more likely a heavily doped degenerated semiconductor or semimetal according to the absolute values of the resistivity.     

Order-disorder at Fe sites in SrFe2/3B″1/3O3 (B″=Mo, W, Te, U) tetragonal double perovskites

We have prepared SrFe_2/3B″_1/3O₃ (B″=Mo, U, Te, and W) double perovskites in polycrystalline form by ceramic methods. Phases with B″=U, Te and W have been studied by X-ray powder diffraction and the results have been compared with neutron diffraction data available for B″=Mo. At room temperature, the stoichiometric samples crystallize in the tetragonal crystal system (space group I4/m, Z=4). Cell parameters when B″=U, Te and W are a=5.6936(1) Å, c=8.0637(1)Å; a=5.5776(1) Å, c=7.9144(3) Å and a=5.5707(3) Å, c=7.9081(5) Å, respectively.The Mössbauer spectra at room temperature for all compounds show hyperfine parameters belonging to two Fe³⁺ sites located at lattice positions with different degrees of distortion. This is in agreement with diffraction data that indicate that the series of compounds display different degrees of Fe-site disorder, which increases in the following sequence: Mo<U<Te<W.