高聚物与光场相互作用的微观机制

分析光场与高聚物相互作用的微观机制，介绍高分子与小分子在光场作用下的极化过程。对在窄束光场作用下，高分子链极化后链上各处极化程度的分布情况进行研究，指出对于高度拉伸的聚合物薄膜，电偶极子模型不适合准确解释高分子与光场相互作用的微观机制。为此，采用符合实际的天线模型分析高分子天线与窄束光场的相互作用，从理论上推导出天线模型高分子链上一小段的极化公式，并用离散变分方法——DVM（discrete variational method）计算一个高分子链的极化分布，验证了文中推导出的分式的合理性。最后，将极化分布看作是电流在天线上的分布，计算了天线的次级辐射在空间中的角分布，得到天线模型对电偶极子模型的修正因子。     

HL-1M装置等离子体与ICRH发射天线的相互作用

ICRH实验的一个比较突出的问题就是杂质。杂质的产生与ICRH发射天线同等离子体的相互作用和RF脉冲的发射有着不可忽视的联系。对HL－1M装置的ICRH发射天线在两年多实验中的变化作了简要的介绍和讨论，并对今后ICRH发射天线的设计提出了一些建议。     

A Bicriterial Optimization Problem of Antenna Design

In this paper we consider a special optimization problem withtwo objectives which arises in antenna theory. It is shown that thisabstract bicriterial optimization problem has at least one solution.Discretized versions of this problem are also discussed, and therelationships between these finite dimensional problems and the infinitedimensional problem are investigated. Moreover, we presentnumerical results for special parameters using a multiobjectiveoptimization method.     

Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

A 24-GHz Patch Array with a Power Amplifier/Low-Noise Amplifier MMIC

This paper presents an active patch array designed at 24 GHz. It can be used as a front-end component for a phased array. A series resonant array structure is chosen which is compact and easy excite. With 5 elements, the array proved a 12-dB antenna gain. A power amplifier and a low noise amplifier are designed on a single GaAs chip (PALNA). Bias switch is used in the PALNA, which greatly reduces the switch loss in a transceiver and increases the efficiency. 20-dB small signal gain is achieved in both power amplifier and low noise amplifier. The active patch array is built by the combination of the patch array and PALNA. The measured active gain of this antenna is 35-dB for the PA mode and 31-dB for the LNA mode. This active patch array can obtain an EIRP of 34 dBm with a total radiated power of 22dBm and a maximum PAE of 32%. To check the noise performance, we applied sources at both normal temperature and 77K (liquid nitrogen) and extracted the noise figure (3.5 dB) of the active antenna by the Y factor method. The results proved that the active antenna is working efficiently as both a transmitting and receiving antenna.     

Integration of microbolometers with infrared microstrip antennas

We report on various integration schemes of infrared microbolometers with microstrip antennas. The first integration design consists of two gold (Au) rectangular microstrip patches coupled along the radiating edges by a narrow niobium (Nb) strip. Devices using silicon oxide are compared to devices using amorphous silicon as antenna substrate. An extension of the twin-patch detector design is the microstrip dipole antenna-coupled microbolometer. Two ways of connecting the device to the contact pads via narrow dc leads are presented and compared. The contribution of the dc leads to the detector response is eliminated by directly connecting the dipole to the contact pads. The thermal isolation of the microbolometer from the silicon wafer is improved by incorporating air into the antenna dielectric substrate. This leads to higher detector responsivity and shifts the resonance towards longer antennas. The implementation of a bridge microstrip dipole antenna structure is also discussed.     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

甘蓝夜蛾信息素类似物的设计合成及初步活性研究

甘蓝夜蛾隶属鳞翅目夜蛾科,主要危害甘蓝、西兰花、萝卜等十字花科蔬菜。与传统的化学农药防治相比,昆虫信息素防治具有专一性强、灵敏度高、绿色环保、同时不会误伤天敌等优点。但天然信息素易降解、持效期短,长期单一使用会诱导昆虫产生抗性等问题。针对这些问题,本文设计并合成了4种结构新颖的信息素类似物:反-11-十六碳烯-3-氯丙酸酯(G1)、反-11-十六碳烯-2-溴丙酸酯(G2)、11,12-二氟十六烷基-1-醇(G3)、11,12-二氟十六烷基乙酸酯(G4),并表征了其结构。通过触角电生理试验(EAG)初步测试了G1~G4的室内生物活性。     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.