Can a Procedure for the Growth of Single-layer Graphene on Copper be used in Different Chemical Vapor Deposition Reactors?

In the last decade, catalytic chemical vapor deposition (CVD) has been intensively explored for the growth of single-layer graphene (SLG). Despite the scattering of guidelines and procedures, variables such as the surface texture/chemistry of catalyst metal foils, carbon feedstock, and growth process parameters have been well-scrutinized. Still, questions remain on how best to standardize the growth procedure. The possible correlation of procedures between different CVD setups is an example. Here, two thermal CVD reactors were explored to grow graphene on Cu foil. The design of these setups was entirely distinct, one being a “showerhead” cold-wall type, whereas the other represented the popular “tubular” hot-wall type. Upon standardizing the Cu foil surface, it was possible to develop a procedure for cm²-scale SLG growth that differed only by the carrier gas flow rate used in the two reactors.     

超临界流体色谱流程设计及其应用

本文设计了多功能超临界流体色谱流程,流程中包括毛细管/微填充柱SFC,GC,计算机控制温度、压力、密度及信号采集、处理,配置有超临界流体萃取池,解决了超临界流体色谱分流口易堵问题。利用该流程,将石腊、DC-200气相色谱固定相、黄油、蜂蜡、救心油、红花油等样品进行超临界流体色谱分离。     

Standardization of Methods for Characterizing the Surface Geometry of Solids

Since a comprehensive survey published in 1999 [1] much work was done in standardizing measuring methods to characterize the surface geometry of dispersed and/or porous solids and to certify reference materials. The present paper is an extension of a short communication [2]. It gives a survey on existing standards and reports on new drafts and proposals.     

Early Evolution of Gas Chromatography in East Germany. Part I: Beginnings, Instrument and Column Development and Organizations

The early evolution of gas chromatography in the former German Democratic Republic (GDR) is surveyed and instrument development is outlined, describing the most important models manufactured in the GDR. The organization of the Arbeitsgemeinschaft für Gas-Chromatographie (Working Group for GC) is chronicled and its activities are discussed. Subsequent parts of this article will deal with the six symposia organized by the Arbeitsgemeinschaft between 1958 and 1968.     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO₃)₂/Mg(NO₃)₂ was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l⁻¹ As and 0.2% (v/v) HNO₃ by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l⁻¹ Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%.     

The characterization of the capability of a balance

A survey is given on important standardized definitions by which the capability of balances may be characterized. Some modifications are proposed with regard to the use of mass sensors for the continuous determination of mass variations. An important supplement is the relative resolution introduced by Jenemann. Optimum values are presented.I am indepted to H. R. Jenemann for his critical remarks.     

Nanostructure evolution studies of bulk polymer materials with synchrotron radiation: progress in method development

The prospects of a modern analysis of nanostructure evolution during the processing of polymer materials by means of scattering from synchrotron radiation are demonstrated in examples. The beam sources have gained stability, shortages are located in beamline setups and in method development for the quantitative analysis of voluminous data sets.By using the proposed multidimensional chord distribution function (CDF) analysis method, nanostructure information from small-angle X-ray scattering (SAXS) data are extracted and visualised. The method can be automated if the beamline setup is able to deliver a full data set with simple constraints. In this case even a simultaneous data evaluation is possible (while one pattern is accumulated, the previous one is analysed). The advantages of the method are demonstrated in a study of the straining of a thermoplastic elastomer. The possibilities of an automated analysis are demonstrated in an investigation of the crystallisation behaviour of high-pressure injection-moulded polyethylene (HPIM-PE). The achievable results of nanostructure analysis of polymer materials are discussed. It is shown that the time-resolved SAXS of polymer materials studied during a transformation and analysed by the CDF method is not just a powerful tool to investigate the relationship between structure and properties of materials; the information that can be gained concerning the processes that control nanostructure evolution is equally important. In the future the enlightenment of such relationships may help to tailor polymer materials with respect to their properties and, beyond that, to improve assessments concerning their aging.     

Estimation of the instrumental band broadening contribution to the column elution profiles in open tubular capillary liquid chromatography

In comparison with conventionally packed HPLC columns, from a theoretical point of view, open capillary liquid chromatography (OTLC) systems offer a number of advantages like high plate numbers and short analysis times. On the other hand, drastic changes have to be made to the instrumentation. In particular, the contribution to band broadening by the chromatographic equipment must be considerably reduced. In the present study an OTLC system was developed and evaluated, which yields satisfactory results for 26 μm i. d. columns. The determination of the contribution of the chromatographic equipment to the total band broadening is discussed.     

吡咯烷二硫代氨基甲酸铵-Ni(Ⅱ)快速共沉淀分离富集和原子吸收光谱法测定痕量铜、铅和镉

研究了用吡咯烷二硫代氨基甲酸铵(APDC)为沉淀剂,以Ni(Ⅱ)为载体离子的共沉淀体系快速共沉淀分离富集铜、铅和镉,并用火焰原子吸收光谱(FAAS)测定的方法。通常情况下,内标元素和载体离子选择不同的元素,本文尝试将Ni既作为载体又作为内标元素。实验证明,该体系在pH=3.0的条件下,能够定量共沉淀试样中的铜、铅和镉。当试液为100 mL时,铜、铅、镉的检出限分别为9.7×10-3、3.3×10-2,1.01×10-3μg.mL-1,加标回收率为95.8%~101.8%,取得了较为满意的结果。本法只需快速收集部分沉淀,与传统的共沉淀方法比较,具有快速、简便、重现性好的优点。