砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

Metabolomics techniques applied in the investigation of phenolic acids from the agro-industrial by-product of Carapa guianensis Aubl

Processing of Carapa guianensis seeds to obtain oil on an industrial scale generates a significant amount of by-product, approximately 66% w/w, which is called cake and is a potential source of biomolecules, including simple phenolic structures. For this reason, studies were carried out on the chemical profiles of hydrolyzed extract from this agro-industrial by-product through High Performance Thin-Layer Chromatography (HPTLC) and Gas Chromatography coupled to Mass Spectrometry (GC–MS). These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product. The sample antioxidant capacity was determined by methods of 2,2-diphenyl-1-picrylhydrazyl (DPPH)and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS⁺) radicals direct sequestration. The hydrolyzed fraction showed a total of 63.47% in the relative abundance of the total of compounds, standing out: p-hydroxybenzoic acid (39.19%) and protocatechuic acid (3,4-dihydroxybenzoic acid) (5.62%), both from hydroxybenzoic acids and 3-(3,4-dihydroxyphenyl)lactic acid, (7.76%) hydroxycinnamic acids derivatives. In these results, the fraction rich in simple phenolic acids was obtained, attributing the prominent behavior of this matrix antioxidant activity, expressed by (IC₅₀: of 16.42 µg/mL and 6.52 µg/mL for DPPH and ABTS⁺ radicals, respectively). The research demonstrated an alternative to applicability that involves sustainability from agro-industrial. These techniques were used to detect metabolic classes and/or groups, and to identify, for the first time, thirteen simple phenolic acids in this by-product, generating a process capable of converting biomass into a bioproduct, consisting of bioactive compounds, in addition to adding value to the industrial chain.     

Parabolic Capacity and Soft Measures for Nonlinear Equations

We first introduce, using a functional approach, the notion of capacity related to the parabolic p-Laplace operator. Then we prove a decomposition theorem for measures (in space and time) that do not charge the sets of null capacity. We apply this result to prove existence and uniqueness of renormalized solutions for nonlinear parabolic initial boundary-value problems with such measures as right-hand side.     

Algorithmic and explicit determination of the Lovász number for certain circulant graphs

We consider the problem of computing the Lovász theta function for circulant graphs C_n,J of degree four with n vertices and chord length J, 2?J?n. We present an algorithm that takes O(J) operations if J is an odd number, and O(n/J) operations if J is even. On the considered class of graphs our algorithm strongly outperforms the known algorithms for theta function computation. We also provide explicit formulas for the important special cases J=2 and J=3.     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

Capacity Constrained Transit Assignment with Common Lines

This paper proposes the use of absorbing Markov chains to solve the capacity constrained transit network loading problem taking common lines into account. The approach handles congested transit networks, where some passengers will not be able to board because of the absence of sufficient space. The model also handles the common lines problem, where choice of route depends on frequency of arrivals. The mathematical formulation of the problem is presented together with a numerical example. This revised version was published online in July 2006 with corrections to the Cover Date.     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Chip-calorimeter for small samples

A method for measuring heat capacities of small samples using a chip-calorimeter and a heat pulse technique is described. The theoretical background to calculate the heat transport properties and the heat capacity of the sample from the pulse response function is given. Problems and potentials of the method are discussed. An example is given.     

回旋管输出窗热性质的研究

一、引 言 输出窗是回旋管的能量输出端口,它的特性直接影响到回旋管的性能和寿命。输出窗的设计包括电特性和热特性的研究。当输出功率增加时,热特性的研究变得非常重要以便寻求合理有效的冷却措施。 输出窗由波导和介质片(块)两部分组成。回旋管的输出波导是圆波导,介质一般做成     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002