A Pseudo-Random Frequency Modulation Continuous Wave Coherent Lidar Using an Optical Field Correlation Detection Method

We propose a new detection method for a pseudo-random frequency modulation continuous wave (RM-CW) coherent lidar. The feature of this method is modulation of local beam with a time delayed pseudo-random sequence. Heterodyne detection and correlation detection between the received beam and the local beam are simultaneously carried out in an optical field. In the RM-CW coherent lidar using the optical field correlation detection method, the received equipment is greatly simplified. We carried out preliminary experiments and demonstrated that the new method is effective for detection of a CW coherent lidar.     

Performance Test of CW 300?GHz Gyrotron FU CW I

A 300 GHz CW gyrotron FU CW I has been developed and installed in the Research Center for Development of Far-Infrared Region, University of Fukui as a power source of a high frequency material processing system. Its performance was tested and the maximum power of 1.75 kW / CW has been attained at the beam voltage of 15 kV and the beam current of 1A. The maximum window power efficiency of 15.5% has been obtained at the cathode voltage slightly lower than 15 kV. This gyrotron is designed to deliver a Gaussian beam after mode conversion from the oscillation mode TE_22,8 in the cavity with a complex of an internal radiator and beam shaping mirrors. The detailed measurement with an infrared camera has confirmed that a Gaussian beam is radiated when the magnetic field strength B _c at the cavity is adjusted at a proper value. However, within a range of B _c , the output power is emerged into multiple directions, which suggests simultaneous oscillation of competing cavity modes.     

连续锁模Nd∶YVO4激光器实现1 GHz高频输出

LD抽运全固体Nd∶YVO4激光器在连续锁模状态运转下获得了高达1 GHz的重复频率.实验中采用半导体可饱和吸收镜作为锁模元件.利用透过率只有0.8%的输出镜以及可获得较小抽运光斑的2 WLD作为抽运源来优化激光器设计,有效地抑制了调Q锁模状态的运转.低的激光器振荡阈值(35 mW)和连续锁模阈值(0.8 W)显示了饱和吸收体低的插入损耗和激光器合理的设计.在最大抽运1.6 W 时获得了210 mW的平均输出功率.     

High power 1341.4 nmNd:YAlO3 CW laser and its performances

A lamp pumped high power 1341.4 nmNd:YAlO₃CW laser and its performances have been described. As high as 188 W of CW output power has been obtained at 1341.4 nm alone line with a overall efficiency of 1.37% and a slope efficiency of 2.14%. The divergence (FWHM) and instability (RMS) of this laser at output power of 155 W are 15 mrad and 1.19%, respectively.     

连续CO2激光对红外窗口材料损伤研究

研究了连续ＣＯ２激光对几种红外窗口材料的表面损伤特性，研究表明，损伤机制在于杂质缺陷吸收造成的热冲击应力破坏。深入研究了杂质缺陷密度、焦斑与材料损伤阈值的关系，并建立了一个损伤模型。同时分析了热冲击应力破坏方式。     

Determination of optical properties of slices of turbid media by diffuse CW laser light scattering profilometry

In this work we present a method for determining the optical parameters of turbid media, namely its absorption coefficient (μ_a) and its reduced scattering coefficient . It is based on the measurement of CW transmittance profiles and analysis of the experimental data by a theoretical model based on the diffusion approximation (DA) of the radiative transfer equation (RTE). The method developed has been investigated with solid polymer probes but it could be applied for liquid materials as well. Experimental results are presented and compared to those of other authors together with a discussion about the accuracy of measurements. In addition, measurements using integrating spheres as well as Monte Carlo simulations are also presented to validate these results.     

大直径光纤端帽的制作与熔接

为了避免高功率光纤激光器输出的激光对双包层光纤端面造成损伤,设计并制作了光纤端帽。使用新型CO2激光器光纤熔接机完成了双包层光纤与端帽的熔接,研究了双包层光纤与端帽熔接的相关工艺与方法。利用高功率连续激光对端帽的性能进行了测试,实验结果表明,熔接有光纤端帽的双包层光纤可以承受507 W连续激光的输出并且没有发生损伤。熔接有端帽的光纤激光器的斜率效率为64.05%,光束质量与未熔接有端帽时相同。     

连续波氧碘激光对光伏型锑化铟探测器的破坏阈值

 通过测量光伏型锑化铟探测器在不同功率密度的连续波氧碘激光辐照下性能的变化,得到其破坏阈值范围为26(089s)～113(14s)W/cm²。 理论上用一维热模型计算了探测器在激光辐照过程中温升和输出信号的变化过程,对实验结果进行了分析。     

High-power CW diode-side-pumped 1341 nm Nd:YAP laser

A high-power CW diode-side-pumped Nd:YAP laser with linearly polarization at 1341 nm has been described. The laser characteristics including thermal lens and stability of flat–flat resonator were studied. By comparing the output powers at different resonator lengths and different output couplers, the c-axis polarized laser working at 1341 nm has been obtained with a maximum output power of 121 W at the pumping power of 555 W. The optical–optical efficiency is 21.8% and the optical slope efficiency is 40%. The a-axis polarized laser at 1339 nm has also been successfully obtained when the c-axis polarized laser had become instable with the increase of pumping power.     

单模石英光纤中连续波泵浦SRS谱的演化

利用连续波掺Yb双包层光纤激光器为泵浦源,对单模石英光纤中受激Raman散射谱的形成过程进行了实验研究结果表明,由自发Raman散射向受激Raman散射演化的过程中Stokes谱宽度不断变窄当Stokes波信号功率较强时,在Raman光谱内部会出现能量红移现象,使Stokes光谱峰值相对于泵浦波的频移量从440cm^-1转化到490cm^-1.