A fast method to measure the thickness of removed layer from etching of SSNTD based on EDXRF

Solid state nuclear track detectors are commonly used for measurements of concentrations of radon gas and/or radon progeny. All these measurements depend critically on the thickness of the removed layer during etching. However, the thickness of removed layer calculated using the etching period does not necessarily provide a sufficiently accurate measure of the thickness. For example, the bulk etch rate depends on the strength of stirring during etching for the LR 115 detector. We propose here to measure the thickness of the removed layer by using energy-dispersive X-ray fluorescence spectrometry. In the present work, a reference silver nitrate pellet is placed beneath the LR 115 detector, and the fluorescence X-ray intensity for silver is then measured. We have found a linear relationship between the X-ray intensity and the thickness of the removed layer for LR 115 detector. This provides a fast method to measure the thickness of removed layer from etching of LR 115 detector. However, this method was found to be inapplicable for the CR-39 detector. Therefore, alternative methods have yet to be explored for the CR-39 detector.     

InAs/GaSb/AlSb resonant tunneling spin device concepts

We discuss device concepts for creating spin-polarized current sources without external magnetic fields, using non-magnetic 6.1 Å semiconductor resonant tunneling structures. Spin filters, spin pumps, and spin transistors that exploit structural and bulk inversion asymmetries will be examined.     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

THE EFEFCT OF MAGNETIC FIELD ON POLYMERIZATION OF STYRENE IN THE PRESENCE OF POLYVINYL NAPHTHALENE AND POLYVINYL BENZOPHENONE

In the process of bulk photopolymerization of styrene initiated by AIBN decomposition polyvinyl benzophenone (PVB) can supply an effective cage for triplet-triplet energy transfer between PVB macromolecules and small molecules of AIBN to influence the molecular weight of polystyrene in weak magnetic field (less than 0.035T), that was different from the case of polyvinyl naphthalene (PVN) which supplied cages for this system only in the stronger magnetic field (more than 0.2 T) studies. It was found that in the same conditions, PVN could exert more tremendous influences on the bulk photopolymerizatiou system of styrene than PVB because in the stronger magnetic field the triplet PVN had much longer life time than PVB.     

A new study of the enzymatic hydrolysis of carboxymethyl cellulose with a bulk acoustic wave sensor

A new bulk acoustic wave (BAW) cellulase sensing technique, which is based on the enzymatic hydrolysis process of sodium carboxymethylcellulose (CMC) by cellulase, was established. The frequency shift curves of BAW sensor indicated that the viscosity of the tested solutions decreased during the hydrolysis process. The hydrolysis rate of CMC by cellulase was calculated from the frequency shift curves. The hydrolysis rate of CMC under different pH conditions at 30°C showed that cellulase had high hydrolysis ability approximately at pH 5.0. Kinetic parameters (the Michaelis constant K_m and the maximum rate V_max) of the process were estimated by using a linear method of Lineweaver–Burk plot. K_m is 1.95±0.25 mg ml⁻¹ and V_max is −(4.25±0.58)×10⁻³ g^1/2 cm^−3/2 cP^1/2 min⁻¹. Also the activation energy (E_a) of the enzymatic hydrolysis, with a value of 51.99±1.26 kJ mol⁻¹, was estimated in this work.     

Beiträge zur Chemie der Pyrrolpigmente, 70. Mitt.: Zum aktiven Transport mit tripyrrinoiden Liganden

The tripyrrin carboxylic acid6 exhibits a pronounced efficiency for carrier mediated proton driven secondary active transport (counter transport) for a series of toxic or valuable cations in a bulk chloroform membrane. In case of Zn⁺⁺ ions the mechanism including complete concentration profiles forNerst diffusion layers and bulk phase have been established. This compound might be used for detoxification or enrichment of precious metals using membrane separation systems.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

Beiträge zur Chemie der Pyrrolpigmente, 78. Mitt.: Die Eigenschaften desb-Nor-bilatrien-abc-b-Nor-biladien-ac-Systems

The redox coupleb-nor-biladiene-ac (2)/b-nor-bilatriene-abc (3) exhibits an oxidative half wave potential of 800 mV in acetonitrile solution. It is demonstrated that it can be used as an extremely efficient electron carrier through bulk membranes. Whereas2 is not suitable as a ligand in carrier mediated cation transport,3 is a medium suited carrier for Cu(II) or Zn(II) ions, however, it is the most efficient one found so far for transport of Hg(II) ions. A 1:1 zinc chelate of3 is isolated and characterized. it is deduced to represent a polymer consisting of about 73 monomer units.

     

Interplay of Electronic Structure and Bulk Properties in 2D and 3D Ternary Carbonitrides from First Principles

The changes in electronic structure and hardness as inferred from the bulk modulus are investigated for model structures of ternary compounds XC₃N₃ (X = B, Al, P, As, Ga) within the framework of density functional theory (DFT). The optimisations of the proposed two‐ (2D) and three‐dimensional (3D) structures and the calculations of the bulk moduli are performed by a pseudo potential method. The electronic structures are calculated with the augmented sphere wave method (ASW). The obtained hardness for 2D BC₃N₃ system (B₀ ～ 220 GPa) points to a magnitude close to that of graphitic C₃N₄. For heavier X atoms it decreases rapidly. This is equally observed for the 3D systems examined in the β‐C₃N₄ structure for which B₀(β‐BC₃N₃) amounts to ～330 GPa. Within the magnitude of the well known hard material cubic BN, the BC₃N₃ phases can be predicted as candidates for ultra hard materials. The electronic effect induced by the chemical nature of the X substitutional was examined according to its position in the periodic table i.e. X_III or X_V. Both, band structures and the electron localisation function (ELF) were used for this analysis. The ELF plots show a decreasing covalency with heavier X‐atoms. Potential applications of the devised systems are proposed such as dopings with atoms (Li, rare gas) and molecules (N₂).     

大气光学湍流估算模式及其相似性函数

地表热通量和水汽通量对全球气候变化和大气环流有着重要而广泛的影响,而Monin-Obukhov(M-O)相似性函数在计算近地层热通量和水汽通量的过程中扮演着重要的角色;同时M-O相似性函数是大气光学湍流估算模式中不可或缺的因子。通过对合肥西郊35 m铁塔上气象数据的分析,利用非线性最小二乘法拟合得到了一套全新的M-O相似性函数。将之与前人提出的相似性函数作对比,展现出了较好的一致性。同时,该函数大气光学湍流的估算模式中,估算值与实测值具有较好的吻合度。分析结果表明：在稳定条件和非常不稳定条件下,可以认为温度相似性函数等于湿度相似性函数,在弱不稳定条件下两者不再满足这种相似性。