Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

Railway wheel fault diagnosis using a fuzzy-logic method

A simple method for diagnosis of railway wheel defects using fuzzy-logic is proposed. The method is based on vibration measurements at different train speeds on healthy wheels and wheels with defects known a priori. The measured vibrations are statistically analyzed and confidence intervals for healthy and defective wheels depending on train speed and frequency of analysis are established. To facilitate the implementation of the method a fuzzy-logic is adopted. The fuzzy-logic model stores the obtained experience in a database and performs the decision making on damage extent and consequently the need of preventive maintenance. In view of the obtained results, the advantages and the limitations of the proposed approach as well as suggestions for further improvements are presented and discussed.     

Designing polymers for nuclear track detection

This article describes our attempts since 1996 to systematically design and synthesize monomers and corresponding polymers for nuclear track detection. So far more than 15 homopolymers/copolymers have been prepared and tested by us for this purpose. Some of these polymers show better track detection characteristics vis-á-vis commercially available poly allyl diglycol carbonate (PADC) track detectors.      

Comparison of responses of LR-115A, CR-39 and PM-355 track detectors to pulsed low-energy proton streams

The paper concerns applications of LR-115A, CR-39 and PM-355 solid-state nuclear-track detectors (SSNTDs) for investigation of pulsed fluxes of protons below 300 keV. The proton streams were generated by the RPI-IBIS device operated with hydrogen puffing [Baranowski et al. 2000. Studies of hydrogen discharges in RPI-type devices with different electrode configurations. Czech. J. Phys. 50 (Suppl. S3), 101–107]. To perform ion mass- and energy-analysis, a Thomson mass-spectrometer equipped with a special input system and exchangeable detectors was used. A quantitative analysis of proton tracks upon Thomson parabolas was performed by means of an optical microscope equipped with a CCD camera. It made possible to measure proton tracks and to determine their statistics. The paper presents proton energy spectra recorded with the selected detectors, and responses of these detectors to protons of energy from about 30 to 300 keV. The results are important for verification of detector characteristics and for measurements of protons at different experimental conditions.     

A branch and bound algorithm for scheduling trains in a railway network

The paper studies a train scheduling problem faced by railway infrastructure managers during real-time traffic control. When train operations are perturbed, a new conflict-free timetable of feasible arrival and departure times needs to be re-computed, such that the deviation from the original one is minimized. The problem can be viewed as a huge job shop scheduling problem with no-store constraints. We make use of a careful estimation of time separation among trains, and model the scheduling problem with an alternative graph formulation. We develop a branch and bound algorithm which includes implication rules enabling to speed up the computation. An experimental study, based on a bottleneck area of the Dutch rail network, shows that a truncated version of the algorithm provides proven optimal or near optimal solutions within short time limits.     

Topological laminations on surfaces

We present and prove a topological characterization of geodesic laminations on hyperbolic surfaces of finite type.     

Optimization of the heavy nuclei track etching in olivine crystals from meteorites

The investigation of the track etching velocity dependence for nuclei with Z50 on pH of the etching solution in the olivine crystals from Marjalahti and Eagle Station meteorites, containing galactic cosmic-ray nuclear tracks and also the crystals from Marjalahti meteorite, calibrated at the UNILAC (GSI, Darmstadt) with 14.17 MeV/N ²⁰⁸Pb nuclei, were performed.

The pH of the etching solution were changed from 7.8 to 9.4. It is shown that the optimal track etch condition were realised at pH of etching solution in the interval from 8.4 to 8.8.

The results of the Galactic cosmic-ray nuclei tracks with Z83 revealed in olivine crystals are presented. They were additionally irradiated at 90% to the surface with accelerated 14 MeV/N ¹³²Xe nuclei.     

Determination of microquantities of Be in samples using α-sensitive track etch detectors

A new technique of determining Be content in samples using 4.66 MeV γ-rays is proposed. This energy range is sufficient to knock out the neutron from the ⁹Be nucleaus and to excite the first 2.9 MeV level of the ⁸Be nuclei. 1.5 MeV alpha particles are registered by means of CR-39 or cellulose nitrate detectors. Alpha particles produced in the reaction of γ-rays with Li nuclei which are contained in samples may cause the background. The latter is excluded by heating of samples before irradiation for Li molecules to be evaporated. ¹¹B nuclei do not produce alpha particles at the energy range of γ-rays presented above.The results obtained in the experiments of determining Be content in natural beryl crystal samples are in good agreement with their known chemical composition. Microparticles containing Beryllium were found in soil samples from the Ust-Kamenogorsk are deposit region, which contains 10⁻³ − 10⁻⁴ g/g of Be. The sensitivity of the method is 10⁻⁶ g/g of Be in solids.     

物理实验教学新模式的探索与实践

提出了一种新的物理实验教学模式，论述了建立实验教学模式所遵循的基本原则和基本做法，简要介绍实施新的教学模式所取得的教学成果。     

Conductivity of aged non-overlapping and overlapping tracks in ion irradiated polyimide

Non-overlapping as well as overlapping tracks of energetic ions have been introduced into polyimide foils. After aging their conductivity was measured. This — to our knowledge — first systematic study shows that conductivity does not only result from multiple track overlapping, but can be found already in single ion tracks. This conductivity is shown to be primarily a consequence of electronic energy transfer. The conductivity of single ion tracks is higher than that of typical insulators, but still orders of magnitude lower than that of typical semiconductors. The conductivity is independent of the applied electric field strength until at excessive voltages the electric current increases nonlinearly up to complete breakthrough. The total conductivity of an irradiated polyimide foil increases proportionally with ion fluence for large ion track spacings, and approaches saturation when the electronically active track regimes begin to overlap. Above some thousand times track overlapping however, new chemical and structural changes in the irradiated material lead to another strong increase in conductivity.