Linearization of column responses by correlation chromatography. Separation improvement and reduction of undesired adsorption effects

Summary Experiments and simulations prove that correlation chromatography can greatly reduce the disadvantage of a non-linear response of the chromatographic column. A factor that has been accepted as being an important source of error in correlation or multiplex chromatography, has been shown not to be. Separations affected, improve dramatically when correlation chromatography is used, and a substantial amount of correlation noise only arises when there is a large difference in separation between a conventional chromatogram and a correlogram.A model has been developed for simulating these nonlinearities. It is shown that, especially for correlation chromatography, the simulation results match the practical measurements very well.     

Using activity focus networks to pressure terrorist organizations

The predominant idea for using network concepts to fight terrorists centers on disabling key parts of their communication networks. Although this counternetwork strategy is clearly a sound approach, it is vulnerable to missing, incomplete, or erroneous information about the network. This paper describes a different and complementary application of network concepts to terrorist organizations. It is based on activity focus networks (AFNs), which represent the complex activity system of an organization. An activity focus is a conceptual or physical entity around which joint activity is organized. Any organization has a number of these, which are in some cases compatible and in some cases incompatible. The set of foci and their relations of compatibility and incompatibility define the AFN. A hypothetical AFN for a terrorist organization is specified and tested in a simulation called AQAS. It shows that certain activity foci, and in particular one combination, have high potential as pressure points for the activity system. The AFN approach complements the counternetwork approach by reducing the downside risk of incomplete information about the communication network, and enhancing the effectiveness of counternetwork approaches over time. Steven R. Corman is Professor in the Hugh Downs School of Human Communication at Arizona State University and Chair of the Organizational Communication Division of the International Communication Association. His research interests include communication networks and activity systems, high-resolution text and discourse analysis, and modeling and simulation of human communication systems.     

基于单光纤对模型的光纤束调制函数的建模与仿真

基于单光纤对光强调制特性的函数表达式,建立了双束型光纤束的调制函数,并引入一个虚拟轴间距参量,建立了随机型光纤束的光强调制函数.同时又在视内圈光纤束为单根粗光纤的情况下,建立了同轴I型和同轴型光纤束的光调制函数.在随机型和同轴型光纤束模型的基础上建立了双圈型(DC)和同轴随机型(C-R)光纤束的光调制系数.最后对上述光纤束的调制特性函数进行了计算机仿真实验.     

An optimal design of collateralized mortgage obligation with PAC-companion structure using dynamic cash reserve

This paper presents a model for optimally designing a collateralized mortgage obligation (CMO) with a planned amortization class (PAC)-companion structure using dynamic cash reserve. In this structure, the mortgage pool’s cash flow is allocated by rule to the two bond classes such that PAC bondholders receive substantial prepayment protection, that protection being provided by the companion bondholders. The structure we propose provides greater protection to the PAC bondholders than current structures during periods of rising interest rates when this class of bondholders faces greater extension risk. We do so by allowing a portion of the cash flow from the collateral to be reserved to meet the PAC’s scheduled cash flow in subsequent periods. The greater protection is provided by the companion bondholders exposure to interest loss. To tackle this problem, we transform the problem of designing the optimal PAC-companion structure into a standard stochastic linear programming problem which can be solved efficiently. Moreover, we present an extended model by considering the quality of the companion bond and by relaxing the PAC bondholder shortfall constraint. Based on numerical experiments through Monte Carlo simulation, we show the utility of the proposed model.     

Anisotropic elastodynamics in a half space: An analytic method for polynomial data

An initial boundary value problem for the dynamic system of anisotropic elasticity in a half space is studied in the paper. A novel method of finding an exact solution of this problem for a special polynomial form of initial data and inhomogeneous term of the system is described. On the base of this method the simulation of elastic waves in different homogeneous anisotropic half spaces is implemented.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Large-scale computer simulation of fully developed turbulent channel flow with heat transfer

Recently, with the advent of supercomputers, there has been considerable interest in the use of direct numerical simulation to obtain information about turbulent shear flow at low Reynolds number. This paper presents a pseudospectral technique to solve the full three-dimensional time-dependent Navier-Stokes and advection-diffusion equations without the use of subgrid-scale modelling. The technique has not been previously used for fully developed turbulent channel flow simulation and is based on methods applied in other contexts. The emphasis of this paper is to provide a reasonably detailed account of how the simulation is done rather than to present new calculations of turbulence. The details of an algorithm for turbulent channel flow simulation and the grid and time step sizes needed to integrate through transient behaviour to steady state turbulence have not been published before and are presented here. Results from a Cray-2 simulation of fully developed turbulent flow in a channel with heat transfer are presented along with a critical comparison between experiment and computation. The first- and second-order moments agree well with experimental measurements; the agreement is poor for higher-order moments such as the skewness and flatness near the walls of the channel. Detailed information given about the effects of spatial grid resolution on a computed results is important for estimating the size of the computation required to study various aspects of a turbulent flow.     

Uniform random number generation

In typical stochastic simulations, randomness is produced by generating a sequence of independent uniform variates (usually real-valued between 0 and 1, or integer-valued in some interval) and transforming them in an appropriate way. In this paper, we examine practical ways of generating (deterministic approximations to) such uniform variates on a computer. We compare them in terms of ease of implementation, efficiency, theoretical support, and statistical robustness. We look in particular at several classes of generators, such as linear congruential, multiple recursive, digital multistep, Tausworthe, lagged-Fibonacci, generalized feedback shift register, matrix, linear congruential over fields of formal series, and combined generators, and show how all of them can be analyzed in terms of their lattice structure. We also mention other classes of generators, like non-linear generators, discuss other kinds of theoretical and empirical statistical tests, and give a bibliographic survey of recent papers on the subject.     

Standing waves, clustering, and phase waves in 1D simulations of kinetic relaxation oscillations in NO+NH3 on Pt(1 0 0) coupled by diffusion

The Lombardo–Imbihl–Fink (LFI) ODE model of the NO+NH₃ reaction on a Pt(1 0 0) surface shows stable relaxation oscillations with very sharp transitions for temperatures T between 404 and 433 K. Here we study numerically the effect of linear diffusive coupling of these oscillators in one spatial dimension. Depending on the parameters and initial conditions we find a rich variety of spatio-temporal patterns which we group into four main regimes: bulk oscillations (BOs), standing waves (SW), phase clusters (PC), and phase waves (PW). Two key ingredients for SW and PC are identified, namely the relaxation type of the ODE oscillations and a nonlocal (and nonglobal) coupling due to relatively fast diffusion of the kinetically slaved variables NH₃ and H. In particular, the latter replaces the global coupling through the gas phase used to obtain SW and PC in models of related surface reactions. The PW exist only under the assumption of (relatively) slow diffusion of NH₃ and H.