多孔介质BISQ模型中的慢纵波

着重研究了多孔介质BISQ模型中慢纵波的基本特性.给出了BISQ模型下慢纵波速度 和衰减的低频近似公式.与Biot理论对比，BISQ模型中慢纵波的衰减随频率降低急剧增大， 且随喷射流长度的减小而增加；相速度随喷射流长度的减小而增加，其低频极限值不是零； 孔隙流体位移与固相骨架位移之比的幅值随喷射流长度的增加而减小，其相位特点与Biot模 型预测的不同；在流体与孔隙介质的边界上可产生更大的渗流.为对比，同时也给出快纵波 的行为.依据BISQ模型可推断：非黏滞流体饱和孔隙介质中不存在喷射流机理；BISQ模型中 关键词： 多孔介质 喷射流 慢纵波 动力协调     

Molecular dynamics simulations on the structures and properties of ε-CL-20-based PBXs ——Primary theoretical studies on HEDM formulation design

Five polymer bonded explosives (PBXs) with the base explosive ε-CL-20 (hexanitrohexaazaisowurtzi- tane), the most important high energy density compound (HEDC), and five polymer binders (Estane 5703, GAP, HTPB, PEG, and F2314) were constructed. Molecular dynamics (MD) method was employed to investigate their binding energies (Ebind), compatibility, safety, mechanical properties, and energetic properties. The information and rules were reported for choosing better binders and guiding formula- tion design of high energy density material (HEDM). According to the calculated binding energies, the ordering of compatibility and stability of the five PBXs was predicted as ε-CL-20/PEG > ε-CL-20/ Estane5703 ≈ε-CL-20/GAP > ε-CL-20/HTPB > ε-CL-20/F2314. By pair correlation function g(r) analyses, hydrogen bonds and vdw are found to be the main interactions between the two components. The elasticity and isotropy of PBXs based ε-CL-20 can be obviously improved more than pure ε-CL-20 crystal. It is not by changing the molecular structures of ε-CL-20 for each binder to affect the sensitivity. The safety and energetic properties of these PBXs are mainly influenced by the thermal capability (C°p) and density (ρ) of binders, respectively.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

Calculation of impulsively started incompressible viscous flows

The paper's focus is the calculation of unsteady incompressible 2D flows past airfoils. In the framework of the primitive variable Navier–Stokes equations, the initial and boundary conditions must be assigned so as to be compatible, to assure the correct prediction of the flow evolution. This requirement, typical of all incompressible flows, viscous or inviscid, is often violated when modelling the flow past immersed bodies impulsively started from rest. Its fulfillment can however be restored by means of a procedure enforcing compatibility, consisting in a pre‐processing of the initial velocity field, here described in detail. Numerical solutions for an impulsively started multiple airfoil have been obtained using a finite element incremental projection method. The spatial discretization chosen for the velocity and pressure are of different order to satisfy the inf–sup condition and obtain a smooth pressure field. Results are provided to illustrate the effect of employing or not the compatibility procedure, and are found in good agreement with those obtained with a non‐primitive variable solver. In addition, we introduce a post‐processing procedure to evaluate an alternative pressure field which is found to be more accurate than the one resulting from the projection method. This is achieved by considering an appropriate ‘unsplit’ version of the momentum equation, where the velocity solution of the projection method is substituted. Copyright © 2004 John Wiley & Sons, Ltd.     

ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

淀粉接枝丙烯酸乙酯及其增容性

研究了在挤出机中采用高温和剪切力的作用直接引发淀粉与丙烯酸乙酯的接枝共聚合反应．讨论了反应条件对接枝反应的影响，研究了接枝物在淀粉与聚乙烯共混物中的增容作用．实验结果表明，高温和剪切力可以引发淀粉与丙烯酸乙酯的接枝共聚合反应．接枝物作为增容剂，可以明显地改善淀粉与聚乙烯共混物的力学性能和流变性能．