Dual-band isotropic metamaterial absorber based on near-field interaction in the Ku band

We numerically and experimentally investigate single-band and dual-band isotropic metamaterial absorbers (IMAs) based on metallic disks. By optimizing the diameter of the metallic disks and the thickness of the dielectric substrate, the single-band IMA is observed at 16.2 GHz with absorptivity of 97%. When adding one disk-pair to the structure, the dual-band IMA is obtained at 12.8 and 15.5 GHz due to the symmetry breaking. The physical mechanics is explained by near-field coupling effect and equivalent LC circuit model. The measurement results performed in the range 12–18 GHz show a good agreement with simulation and theoretical analysis. Our findings demonstrate a new approach to achieve dual-band and multi-band IMAs.     

Assembling hydrodynamic cloaks to conceal complex objects from drag

Transformation hydrodynamics and the corresponding metamaterials have been proposed as a means to exclude the drag force acting on an object. Here, we report a strategy to deploy the hydrodynamic cloaks in a more practical manner by assembling different-shaped cloaking parts. Our strategy is to first model a square-shaped cloak and a carpet cloak and then combine them to conceal a more complex-shaped space in the three-dimensional hydrodynamic flow. With the derivation of transformation hydrodynamics, the coordinate transformations for each hydrodynamic cloaking are demonstrated with the calculated viscosity tensors. The pressure and velocity fields of the square, triangular (carpet), and exemplary three-dimensional house-shaped cloaks are numerically simulated, thus showing a cloaking effect and reduced drag. This study suggests an efficient way of cloaking complex architectures from fluid-dynamic forces.     

Effective medium representation and complex modes in 3D periodic metamaterials made of cubic resonators with large permittivity at mid-infrared frequencies

We review some of the techniques that lead to the effective medium representation of a three-dimensional (3D) periodic metamaterial. We consider a 3D lattice of lead telluride cubic resonators at mid-infrared (MIR) frequencies. Each cubic resonator is modeled with both an electric and a magnetic dipole, through a method called the dual dipole approximation. The electric and magnetic polarizabilities of a cubic resonator are computed via full-wave simulations by mapping the resonator's scattered field under electric/magnetic excitation only to the field radiated by an equivalent electric/magnetic dipole. We then analyze the allowed modes in the lattice, with transverse polarization and complex wavenumber, highlighting the attenuation that each mode experiences after one free space wavelength. We observe the presence of two modes with low attenuation constant, dominant in different frequency ranges, able to propagate inside the lattice: this allows the treatment of the metamaterial as a homogeneous material with effective parameters, evaluated by using various techniques. We then show that the metamaterial under analysis allows for the generation of artificial magnetism (i.e., relative effective permeability different than unity, including negative permeability with low losses) at MIR frequencies.     

Tunable dual-band liquid crystal based near-infrared perfect metamaterial absorber with high-loss metal

ABSTRACT

In this work, a tunable dual-band near-infrared perfect metamaterial absorber formed by combining a highly birefringent nematic liquid crystal with a nanoscale metamaterial cavity arranged in mirror symmetry is designed and numerically investigated. Electromagnetic simulations indicate that the absorbance greater than 99.4% may be achieved at 328 THz and 364 THz. Perfect absorbance results both form the use of highly lossy metal and the optimization of the metamaterial structure. In addition, absorbance of the metamaterial device can be substantially tuned both in terms of its magnitude and wavelength with the spectral tunability up to 8 THz by switching of liquid crystal alignment. The soft-matter-based metamaterial absorbers may pave a crucial role towards various active multifunctional systems working in the near-infrared range.     

Photonic gap vanishing in one-dimensional photonic crystals with single-negative metamaterials

The properties of photonic band gap in one-dimensional photonic crystals composed of single-negative metamaterials are studied theoretically. Our study shows that the photonic gap will vanish at a certain incident angle when both the phase-match and impedance-match conditions are satisfied simultaneously, suggesting that the bandwidth and location of the photonic gap are strongly dependent on the incident angle and polarization. However, the photonic gap will not vanish and may become insensitive to the incident angle when the two match conditions cannot be met. Our study also shows that losses in metamaterials have little effect on the properties of the photonic gap.     

Magnetic monopole-like response in metamaterials

In this paper, we explored magnetic monopole-like responses in metamaterials. We designed a sub-wavelength metamolecule that is composed of two dielectric-spaced split-ring resonators. In response to incident waves, the induced magnetic field in the metamolecule resembles that of a two-dimensional magnetic monopole. The magnetic monopole-like response is resulted from electric resonance of the metamolecule, so an electric dipole is always attached. By combining two mirror-symmetric metamolecules with inward and outward radial magnetic fields, magnetic dipole-like responses can be produced just as an electric dipole is formed by separating two opposite-signed electric charges.     

Triple negative permeability band in plasmon-hybridized cut-wire-pair metamaterials

We expand the picture of plasmon hybridization in metamagnetic structure via numerically studying the electromagnetic coupling in the metallic cut-wire-pair super cells. It is shown that a triple negative permeability band can be achieved by systematically controlling the plasmon hybridization in such the structure. The corresponding transmission properties as well as the electromagnetic responses of the plasmon-hybridized structures were presented by using the finite integration technique simulations. Our results would reveal a promising design to obtain the multiple negative refractions based on the combination of hybridized cut-wire-pairs and continuous wires.     

Design of electromagnetic cloaks and concentrators using form-invariant coordinate transformations of Maxwell’s equations

The technique of applying form-invariant, spatial coordinate transformations of Maxwell’s equations can facilitate the design of structures with unique electromagnetic or optical functionality. Here, we illustrate the transformation-optical approach in the designs of a square electromagnetic cloak and an omni-directional electromagnetic field concentrator. The transformation equations are described and the functionality of the devices is numerically confirmed by two-dimensional finite element simulations. The two devices presented demonstrate that the transformation optic approach leads to the specification of complex, anisotropic and inhomogeneous materials with well directed and distinct electromagnetic behavior.     

Enhanced nonlinear effects in pulse propagation through epsilon‐near‐zero media

In recent years, unconventional metamaterial properties have triggered a revolution of electromagnetic research which has unveiled novel scenarios of wave‐matter interaction. A very small dielectric permittivity is a leading example of such unusual features, since it produces an exotic static‐like regime where the electromagnetic field is spatially slowly‐varying over a physically large region. The so‐called epsilon‐near‐zero metamaterials thus offer an ideal platform where to manipulate the inner details of the “stretched” field. Here we theoretically prove that a standard nonlinearity is able to operate such a manipulation to the point that even a thin slab produces a dramatic nonlinear pulse transformation, if the dielectric permittivity is very small within the field bandwidth. The predicted non‐resonant releasing of full nonlinear coupling produced by the epsilon‐near‐zero condition does not resort to any field enhancement mechanism and opens novel routes to exploiting matter nonlinearity for steering the radiation by means of ultra‐compact structures.

     

一种基于单负Metamaterials成对结构的带通滤波器的设计

提出了一种基于单负Metamaterials对的带通滤波器的设计原理,给出了这种带通滤波器的谐振频率的表达式,对其谐振频率及带宽与其决定因素之间的关系进行了计算,对计算结果进行了讨论,为设计单负Metamaterial对带通滤波器的理论与方法提供了依据。研究结果表明：利用单负Metamaterials对的确可以实现带通滤波器;ENG板的磁导率μ1、MNG板的介电常数ε2、电等离子体频率ωep、磁等离子体频率ωmp、两个层的厚度比值a这五个因素决定了这种滤波器的中心频率;两个层的厚度及二者之间的比值决定这种滤波器的带宽。