Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

聚乙烯醇硫酸钾水凝胶电机械化学行为研究

通过将交联聚乙烯醇硫酸酯化的方法制备了一种新型电刺激响应性聚乙烯醇硫酸钾(PVSK)智能水凝胶,并探讨了溶液离子强度和pH对PVSK水凝胶的溶胀吸水率、机械性能以及电机械化学行为的影响.结果表明,制备的PVSK水凝胶的平衡溶胀比随NaCl溶液离子强度的增大而减小,在pH2.39～10.83范围内基本不受溶液pH的影响;经不同离子强度和pH的NaCl溶液充分溶胀的PVSK水凝胶具有良好的机械性能,在非接触的直流电场作用下,该水凝胶向电场负极弯曲,凝胶的弯曲速度和弯曲偏转量随外加电场强度的增加而增大,随NaCl溶液离子强度的增大出现临界最大值,但不随溶液pH(2.08～10.53)的改变而改变;在循环电场作用下,PVSK水凝胶的电机械化学行为具有良好的可逆性.     

Use of early acoustic emission to evaluate the structural condition and self-healing performance of textile reinforced cements

Textile reinforce cements (TRC) are innovative materials that are used for repair of existing structures or recently as stand-alone lightweight structural members. Fracture and thermal behavior of these materials are very complicated due to multiple failure modes. The undergoing processes cannot be described by the simple constitutive equation. In this perspective the contribution of monitoring techniques is crucial. Acoustic emission (AE) is used to check the behavior of TRC beams and plates in different states of structural health: intact, thermally pre-cracked and self-healed by polymer powder. This is the first time that the AE behaviors of intact, cracked and self-healed TRC laminates are compared in literature.     

Thin film stress measurement by instrumented optical fibre displacement sensor

Residual stress can adversely affect the mechanical, electronic, optical and magnetic properties of thin films. This work describes a simple stress measurement instrument based on the bending beam method together with a sensitive non-contact fibre optical displacement sensor. The fibre optical displacement sensor is interfaced to a computer and a Labview programme enables film stress to be determined from changes in the radius of curvature of the film-substrate system. The stress measurement instrument was tested for two different kinds of thin film, hard amorphous carbon nitride (CN) and soft copper (Cu) films on silicon substrates deposited by RF magnetron sputtering. Residual stress developed in 500 nm thick CN thin films deposited at substrate temperatures in the range 50-550 °C was examined and it was found that stress in CN films decreased from 0.83 to 0.44 GPa compressive with increase of substrate temperature. Residual stress was found to be tensile (121 MPa) for Cu films of thickness 1500 nm deposited at room temperature.     

Coexistent Fluid-Phase Equilibria in Biomembranes with Bending Elasticity

The theory of fluid surfaces with elastic resistance to bending is applied to coexistent phase equilibria in biomembranes composed of lipid bilayers. A simplified version of the model is used to simulate the necking and budding of closed vesicles.      

准各向同性高电流密度导体弯曲特性研究

提出了一种准各向同性高工程电流密度高温超导导体的有限元模型,利用该有限元模型计算了导体在不同弯曲半径下的应变分布以及临界电流衰减程度,并对导体样品进行了弯曲实验。实验结果和仿真结果基本一致,基于该有限元模型进一步计算了导体的不同参数对弯曲半径的影响。该研究为准各向同性高工程电流密度高温超导导体在聚变磁体领域的应用提供了参考依据。     

Evaluating shape memory behavior of polymer under deep-drawing conditions

Thermoplastic polyurethanes (TPU) are a popular family of shape memory polymers (SMP) due to their excellent abrasion & weather resistant, and mechanical strength. However, conventional processing operations or their combination with other polymers by adhesion or blending can affect their unique shape memory behavior. Currently, there are no effective methods to study and quantify the shape memory behavior of SMP based polymer laminates as they would respond to deep drawing operations. In this paper, a new method was introduced to effectively quantify the recovery behavior of TPU based polymer laminates undergoing simultaneous stretching and bending operations at different processing temperatures. The results presented show the value of developing a shape recovery characterization method that resembles the stresses of thermoforming to properly assess formability of shape memory polymers used in laminate constructions.     

Performance enhancement on mechanical and electrical effects for on-line fiber-optic bending loss measurement

For an automatic testing of the fiber bending loss parameter, we proposed an on-line fiber optic bending loss measurement system. Many impact factors from the supporting systems, free space coupling alignment, external spatial perturbation device and the other automatic testing systems may degrade the on-line fiber-optic bending loss measurement system. We reduce those impact factors and show the mechanical and electrical improvement in this paper. The accuracy can be improved by 3–5 dB for the proposed on-line bending loss measurement system. Development of an on-line fiber-optic bending loss measurement system can provide a fast-checking solution for jump-line quality improvement on fiber-from-the-desk (FFTD) access network.     

云母石英片岩斜坡弯曲倾倒变形的理论分析

片岩斜坡中弯曲倾倒变形是通过密集的片理上逐层剪切位移实现的。文中给出了瞬时变形终止时σ1与片理面法线夹角γ的理论公式。瞬时变形结束后, 由于片理面上剪应力作用, 将继续发生剪切蠕变。本文给出了γ随着时间t变化的公式。最后本文讨论了地下水压力在倾倒变形中的作用, 并在理论公式中考虑了这一因素。     

Study on the Collapse of Pin-Reinforced Foam Sandwich Panel Cores

New fabrication technologies now allow for hybrid sandwich structures, known as X-core, to be manufactured. The X-core panels consist of a pin reinforced polymer foam core with carbon fiber face sheets. Carbon fiber or metallic (Titanium/Steel) pins are inserted into the foam core in the out-of-plane direction and extend from face sheet to face sheet. The through thickness three-point simply supported bending behavior of these panels is used to evaluate the collapse characteristics of the panels. Explicit experimental observations are used to calibrate analytical energy balance models describing the panel collapse as a function of geometry and properties. The mechanical response of X-core sandwich panels is compared to current sandwich materials for material selection.