Influence of solvents on the formation of ultrathin uniform poly(vinyl pyrrolidone) nanofibers with electrospinning

Although there have been many reports on the preparation and applications of various polymer nanofibers with the electrospinning technique, the understanding of synthetic parameters in electrospinning remains limited. In this article, we investigate experimentally the influence of solvents on the morphology of the poly(vinyl pyrrolidone) (PVP) micro/nanofibers prepared by electrospinning PVP solution in different solvents, including ethanol, dichloromethane (MC) and N,N‐dimethylformamide (DMF). Using 4 wt % PVP solutions, the PVP fibers prepared from MC and DMF solvents had a shape like a bead‐on‐a‐string. In contrast, smooth PVP nanofibers were obtained with ethanol as a solvent although the size distribution of the fibers was somewhat broadened. In an effort to prepare PVP nanofibers with small diameters and narrow size distributions, we developed a strategy of using mixed solvents. The experimental results showed that when the ratio of DMF to ethanol was 50:50 (w/w), regular cylindrical PVP nanofibers with a diameter of 20 nm were successfully prepared. The formation of these thinnest nanofibers could be attributed to the combined effects of ethanol and DMF solvents that optimize the solution viscosity and charge density of the polymer jet. In addition, an interesting helical‐shaped fiber was obtained from 20 wt % PVP solution in a 50:50 (w/w) mixed ethanol/DMF solvent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3721–3726, 2004     

聚丙烯基纳米碳纤维复合材料结晶行为研究

采用示差扫描量热法(DSC)研究了纳米碳纤维对PP／CNF复合材料中PP结晶行为的影响。结果表明：纳米碳纤雏可提高PP的结晶温度，但略降低其结晶速率和结晶度。提高纳米碳纤雏含量或减小纳米碳纤雏直径，PP结晶行为的上述变化更为明显，但结晶速率随纳米碳纤维含量出现先减小后增大的趋势。     

Silicon carbide nanotubes and nanotubular fibers: Synthesis, stability, structure, and classification

Published data on silicon carbide nanotubes (SiC-NT) are analyzed. According to theoretical calculations, single-layer SiC-NTs do not dissociate, but they have not yet been detected experimentally. According to the experimental data, metastable SiC-NTs with walls consisting of several layers and nanotube fibers were produced. The optimized structure of single-layer SiC-NTs was calculated by the RHF/6-31G quantum-chemical method. The possibility of obtaining SiC-NTs by gas-phase chemical deposition from methyltrichlorosilane in the temperature range of 800–1000 °C was investigated. Nanofibers and polygrained SiC nanotubes were obtained, but ordinary layer SiC nanotubes were not detected. To remove the inconsistencies it was first proposed to classify the nanotubes according to the structure of their walls, separating all the SiC-NTs into three types: 1) ordinary layer nanotubes with rolled layers, similar to carbon nanotubes; 2) polynanocrystalline nanotubular fibers or nanotubes with walls consisting of linked differently oriented nanograins; 3) monocrystalline synthetic nanotubes with ideal crystalline walls. It was concluded that the ordinary SiC-NTs of the first type are unstable with the exception of one-or two-layer nanotubes; stable SiC-NTs of the first type and SiC-NTs of the third type have not yet been discovered; only nanotubular fibers of the second type were obtained experimentally. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 3–13, January–February, 2006.     

Size‐dependent mechanical properties of glassy polymer nanofibers via molecular dynamics simulations

The microstructure of polymer matrix under cylindrical confinement is key to understanding the size‐dependent thermomechanical behavior of electrospun nanofibers. Coarse‐grained molecular dynamics simulation was applied here to probe polymer systems under cylindrical confinement, prepared with or without pre‐stretching. Simulation results showed that below a certain radius, a noticeable increase of the elastic modulus is observed with the decrease of the radius of cylindrical confinement. This size‐dependent mechanical behavior correlated to the degree of polymer chain orientation. Modulation of density and bond orientation in the radial direction was observed: the density and bond orientation began to oscillate, increasing the oscillation amplitudes with decreases in the radius. Such behavior suggests that the cylindrical confinement enhances the bond alignment of the entire fiber and not in the near‐surface layers only. The unstretched fibers had uniform density distribution along the fiber axis, while the stretched fibers demonstrated a fluctuation in density distribution. The crossover radius of size‐dependent behavior was two orders of magnitude smaller than observed in real experiments, demonstrating that the confinement affects some internal fiber scale, which exceeds the scale of individual macromolecules, and this internal scale may be related to supramolecular structures of the polymer matrix rather than the individual macromolecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 506–514     

Computational-Based Approach for Predicting Porosity of Electrospun Nanofiber Mats Using Response Surface Methodology and Artificial Neural Network Methods

Comparative studies between response surface methodology (RSM) and artificial neural network (ANN) methods to find the effects of electrospinning parameters on the porosity of nanofiber mats is described. The four important electrospinning parameters studied included solution concentration (wt.%), applied voltage (kV), spinning distance (cm) and volume flow rate (mL/h). It was found that the applied voltage and solution concentration are the two critical parameters affecting the porosity of the nanofiber mats. The two approaches were compared for their modeling and optimization capabilities with the modeling capability of RSM showing superiority over ANN, having comparatively lower values of errors. The mean relative error for the RSM and ANN models were 1.97% and 2.62% and the root mean square errors (RMSE) were 1.50 and 1.95, respectively. The superiority of the RSM-based approach is due to its high prediction accuracy and the ability to compute the combined effects of the electrospinning factors on the porosity of the nanofiber mats.     

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

Different PES nanofibrous membrane parameters effect on the efficacy of immunoassay performance

The contribution of electrospun nanofibrous membranes (e.NFMs) in the biosensing platforms opens up a new prospect for the invention of faster and more sensitive analytical devices. In this paper, we utilized e.NFM of polyethersulfone (PES) as a solid substrate for the protein immobilization through two different approaches: physical and covalent. Scanning electron microscopy (SEM) and Fourier‐transform‐infrared (FTIR) tests were performed to study the effect of plasma treatment on protein immobilization efficacy. Moreover, taking advantage of ELISA technique, the influence of different parameters, namely, nanofibers diameter, membrane thickness, plasma treatment time, an incubation time of ethyl‐3‐(3‐dimethylaminopropyl)‐carbodiimide/N‐hydroxysuccinimide (EDC/NHS), and their ratio on antibody immobilization efficacy through two mentioned approaches, was also assessed.     

Statistical and experimental investigation on low density microcellular foaming of PLA-TPU/cellulose nano-fiber bio-nanocomposites

This study dedicates to foaming of biocompatible blends of polylactic acid and thermoplastic polyurethane reinforced with bio-degradable cellulose nanofibers. This research primarily was associated with fabrication of PLA-TPU nanocomposites using a low weight fraction of cellulose nanofibers as a biodegradable reinforcement. Microstructural and mechanical properties of fabricated nanocomposites were examined and diffractometry was utilized to verify formation of percolated nanocomposites. Microcellular foaming was then performed with CO₂ as a blowing agent. Central composite design was applied in designing the experiments to evaluate the effects of main operating variables consisting of saturation pressure and time, heating time and foaming temperature. The results demonstrated that high saturation pressure and time promoted low cell diameters (below 5 μm) and high cell densities (above 10⁹ cell/cm³) due to the grown degree of crystallinity and higher PLA-TPU miscibility. Accordingly, adding TPU and CNF to the matrix create high crystalline foamed samples decorated with low bulk density.     

Novel Preparation of Polyethylene from Nano‐extrusion Polymerization Inside the Nanochannels of MCM‐41/MgCl2/TiCl4 Catalysts

The MCM‐41 and SiO₂ supported TiCl₄ and TiCl₄/MgCl₂ catalysts with different molar ratios of Mg/Ti were synthesized and used for ethylene polymerization under atmospheric pressure. The nanochannels of MCM‐41 serve as nanoscale polymerization reactor and the polyethylene nanofibers were extruded during the reaction. The nanofibers were observed in SEM micrographs of resulting polyethylene. The effect of MgCl₂ on catalytic activity and thermal properties of resulting polyethylene is investigated too. In the presence of MgCl₂, the catalytic activity increased and more crystalline polyethylene with higher melting points were formed. However, no fibers could be observed in the polyethylene prepared by SiO₂ supported catalysts.     

纳米储能纤维复合过滤膜的制备及性能

以静电纺丝技术制备的同轴聚甲基丙烯酸十八烷基酯(PSMA)/聚对苯二甲酸乙二酯(PET)纳米储能纤维为支撑层,经聚偏氟乙烯(PVDF)涂覆成膜和溶剂化处理,制备了一种低压高水通量的纳米储能纤维复合过滤膜(NFCM),其中以水或乙醇为凝固溶液的复合过滤膜分别记为NFCM@H2O或NFCM@EtOH.分析并讨论了不同溶剂处理方式对NFCM力学性能和表面形貌的影响,表征了膜的纯水通量和抗污性能,用扫描电子显微镜(SEM)观察了膜的横断面形貌.结果表明,PSMA/PET纳米储能纤维具有明显的吸放热行为,熔融温度和热焓值分别为36.5℃和10.7J/g,NFCM的熔融温度和热焓值分别为36℃和2.7J/g.NFCM的形貌结构、纯水通量和截留率与溶剂处理方式相关,NFCM@EtOH膜的水通量介于100~1400L/(m2·h)之间,而NFCM@H2O膜的水通量仅在40~220L/(m2·h)之间.NFCM的拉伸强度由初始0.925MPa(PVDF)提高到4.28MPa以上.NFCM中的相变材料对膜过滤性能有重要影响,并在过滤温度低于50℃时具有减缓作用.