High index of refraction via quantum interference in a three-level system of Er^3＋-doped yttrium aluminium garnet crystal

A simple three-level system is proposed to produce high index of refraction with zero absorption in an Er^3＋-doped yttrium aluminium garnet （YAG） crystal, which is achieved for a probe field between the excited state 4I13/2 and ground state 4I15/2 by adjusting a strong coherent driving field between the upper excited state 4I11/2 and 4I15/2. It is found that the changes of the frequency of the coherent driving field and the concentration of Er^3＋ ions in the YAG crystal can maximize the index of refraction accompanied by vanishing absorption. This result could be useful for the dispersion compensation in fibre communication, laser particle acceleration, high precision magnetometry and so on.     

级联三能级介质中非线性光学信号的增强

揭示非最大相干可能比最大相干产生更有效的非线性频率转换. 为此以三能级级联系统(没有最大相干)为例计算其非线性光学信号的强度, 并与三能级Λ型系统(具有最大相干)进行比较. 利用非微扰方法计算表明, 在双光子共振和相同参数的条件下, 级联系统产生的非线性光学信号的最大强度约是Λ系统的两倍. 利用缀饰态表象分析表明, 两个系统中耦合跃迁的自发辐射及其介入的不可逆三光子过程具有相反的作用. 它们在级联系统中加强非线性转换, 而在Λ系统中削弱非线性转换. 关键词： 电磁感应透明 非线性光学过程 双光子共振     

共振原子蒸气中激光脉冲的时空特性

在柱对称条件下，利用耦合的布洛赫－麦克斯韦方程，研究了激光脉冲在原子蒸气介质中的共振传播。考察了脉中在时空中的演化。数值计算结果表明激光脉冲在传播中，由于自感应透明与光波的衍射效应，表现出复杂的相干现象。     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

Propagation of Light in an Ensemble of Tripod Level Atoms

We study the propagation of a quantum probe light in an ensemble of tripod level atoms when the atoms are coupled to two other classical control fields. First we calculate the dispersion properties, such as susceptibility and group velocity, of the probe light within such an atomic medium under the case of three-photon resonance via the dynamical algebra method of collective atomic excitations. Then we calculate the dispersion of the probe light in the case that two classical control fields have the different detunings to the relative atomic transitions. Our results show that in both cases the phenomenon of electromagnetically induced transparency can occur. Especially under the second case, we can find two transparency windows for the probe light.     

光子晶体中四能级系统的量子相干效应

研究了处于光子带隙材料中的四能级原子系统的电磁感应透明、自发辐射和光子开关效应，分析了其稳态与瞬态特性, 发现特殊的模密度能够导致反常的吸收、色散、自发辐射及瞬态无反转增益, 并可以通过外加调制场进行控制.详细讨论了特殊频率处模密度的变化对透明窗口和光子开关效应的影响. 关键词： 光子带隙材料 电磁感应透明 模密度 光子开关     

电磁诱导透明和导致极慢光速的机制

根据有关文献 ,描述了电磁诱导透明和导致光速极慢的物理机制 ,并对实验结果也做了介绍     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006