Synthesis and structural characterization of novel,fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties

The synthesis and structural characterization of a series of novel, fluorinated poly(phthalazinone ether)s containing perfluorophenylene moieties are described. The monomers, 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a – 2d ), were conveniently and efficiently synthesized from phenols and phthalic anhydride in two steps via 2‐(4′‐hydroxybenzoyl)benzoic acids, which were first obtained by the Friedel–Crafts reaction in good yields and with high stereoselectivity and were then converted into 2a – 2d by fusion with hydrazine. All the polymers were prepared by nucleophilic aromatic substitution (S_NAr) polycondensation between the compounds perfluorobiphenyl and 4‐(4′‐hydroxyaryl)phthalazin‐1(2H)‐ones ( 2a ‐ 2d ). The resulting fluorinated polymers were readily soluble in common organic solvents (e.g., CHCl₃, tetrahydrofuran, dimethylformamide, dimethyl sulfoxide, N‐methylpyrrolidone, etc.) at room temperature. Their weight‐average molecular weights and the polydispersities ranged from (7.96–18.25) × 10³ to 1.31–2.71, respectively. Their glass‐transition temperatures varied from 213 to 263 °C. They were all stable up to 390 °C both in air and in argon. The 5% weight‐loss temperatures of these polymers in air and argon ranged from 393–487 to 437–509 °C, respectively. Wide‐angle X‐ray diffraction studies indicated they were all amorphous and could be attributed to the presence of kink nonplanar moiety, phenyl phthalazinone along the polymer backbone. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 925–932, 2004     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

热塑性塑料熔体质量流动速率测量不确定度的评定

以聚乙烯为例讨论了热塑性塑料熔体质量流动速率测量不确定度的来源,依据JJF 1059-1999对熔体流动速率测试过程中的测量不确定度分量进行了分析和评定。7149型聚乙烯熔体质量流动速率测量结果的扩展不确定度为0.096 g/(10 m in)。     

Rheological,mechanical and morphological properties of thermoplastic vulcanizates based on NR‐g‐PMMA/PMMA blends

Graft copolymer of natural rubber and poly(methyl methacrylate) (NR‐g‐PMMA) was prepared using semi‐batch emulsion polymerization technique via bipolar redox initiation system. It was found that the grafted PMMA increased with the increase of methyl methacrylate (MMA) concentration used in the graft copolymerization. The NR‐g‐PMMA was later used to prepare thermoplastic vulcanizates (TPVs) by blending with PMMA through dynamic vulcanization technique. Conventional vulcanization (CV) and efficient sulphur vulcanization (EV) systems were studied. It was found that the CV system provided polymer melt with lower shear stress and viscosity at a given shear rate. This causes ease of processability of the TPVs via extrusion and injection molding processes. Furthermore, the TPVs with the CV system showed higher ultimate tensile strength and elongation. The results correspond to the morphological properties of the TPVs. That is, finer dispersion of the small vulcanized rubber particles were observed in the PMMA matrix. Various blend ratios of the NR‐g‐PMMA/PMMA blends using various types of NR‐g‐PMMA (i.e. prepared using various percentage molar ratios of NR and MMA) were later studied via dynamic vulcanization by a conventional sulphur vulcanization system. It was found that increasing the level of PMMA caused increasing trend of the tensile strength and hardness properties but decreasing level of elongation properties. Increasing level of the grafted PMMA in NR molecules showed the same trend of mechanical properties as in the case of increasing concentration of PMMA used as a blend component. From morphological studies, two phase morphologies were observed with a continuous PMMA phase and dispersed elastomeric phase. It was also found that more finely dispersed elastomeric phase was obtained with increasing the grafted PMMA in the NR molecules. Copyright © 2005 John Wiley & Sons, Ltd.     

Novel fabrication of magnetic thermoplastic nanofibers via melt extrusion of immiscible blends

A novel technique of fabricating magnetic thermoplastic nanofibers by the control of the phase separation of immiscible polymer blends during melt extrusion was presented. The magnetic poly(vinyl alcohol‐co‐ethylene) (PVA‐co‐PE)/Fe₃O₄ composite nanofibers were prepared via the melt extrusion of cellulose acetate butyrate matrix and PVA‐co‐PE preloaded with different amounts of Fe₃O₄ nanoparticles. The morphologies of magnetic composite nanofibers were characterized by scanning electron microscopy. The uniform dispersion of Fe₃O₄ nanoparticles in nanofiber matrixes and crystal structures were confirmed using transmission electron microscopy and wide angle X‐ray diffraction. Thermogravimetric analysis was employed to quantify the exact loading amount of Fe₃O₄ nanoparticles in the composite nanofibers. The magnetic measurements showed that composite nanofibers displayed superparamagnetic behavior at room temperature. With increasing content of Fe₃O₄ nanoparticles, the saturation magnetization of the magnetic composite nanofiber significantly improved. The prepared magnetic composite nanofibers might have found potential applications in the sensors and bio‐molecular separation fields. Copyright © 2012 John Wiley & Sons, Ltd.     

Monomers and polymers from plant oils via click chemistry reactions

As a consequence of the depleting of fossil reserves and environmental issues, today, plant oils and fatty acids derived therefrom have a respectable status within the polymer chemistry community. However, maximizing the benefits of these renewable feedstocks requires the utilization of sustainable and efficient chemical transformations. The emergence of click chemistry concept and especially the renaissance of thiol‐ene addition reaction have had an impact on the way to make plant oil‐derived polymers. This highlight discusses the applicability and success of thiol‐ene addition and other click reactions in the transformation of oleochemicals into monomers and polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013     

Optical characterization of polycarbonate: Influence of additives on optical properties

In laser transmission welding of thermoplastics the optical properties of the joining parts determine the quality of the welding result. Especially, the scattering of laser radiation in the transparent welding part has an impact on weld seam properties. This scattering is caused by additives. For polycarbonate (PC) with different additives the transmittance, the reflectance and the collimated transmittance are measured with a UV‐VIS‐NIR spectrometer. From this data, the optical properties, such as scattering coefficient, absorption coefficient, and anisotropy factor are calculated. The calculations are made with the aid of the four‐flux model of radiation transport in the diffusive approximation. The results show that the additives have a significant influence on the scattering coefficient. For most additives under consideration the scattering is forward directed, which means that most of the radiation is transmitted into the absorbing welding part. However, the power density distribution of the transmitted radiation may differ significantly from PC without additives. So, the weld seam may also differ due to different additives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 451–455, 2010     

Poly(arylene sulfide)s by nucleophilic aromatic substitution polymerization of 2,7‐difluorothianthrene

Poly(thianthrene phenylene sulfide) and poly(thianthrene sulfide) have been prepared by nucleophilic aromatic substitution polymerization of the activated monomer 2,7‐difluorothianthrene with bis thiophenoxide and sulfide nucleophiles, respectively. The resulting polymers are thermally stable, amorphous materials that have been characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), matrix‐assisted laser desorption/ionization‐time‐of‐flight (MALDI‐TOF) mass spectrometry, UV‐Vis spectroscopy, refractometry, and intrinsic viscosity (IV) measurements. The polymers produced exhibit 5% weight loss values approaching 500 °C in inert and air atmospheres and glass transition temperatures that range from 149 to 210 °C. Poly(thianthrene phenylene sulfide) with a number average molecular weight of 22,100 g/mol has been synthesized with an IV in DMPU of 0.62 dL/g at 30 °C. Creasable films of this polymer have been prepared by solvent casting and melt pressing at 250 °C. Films of poly(thianthrene phenylene sulfide) exhibit transparencies greater than 50% at wavelengths exceeding 400 nm and a high refractive index value of 1.692 at a wavelength of 633 nm, making the polymer interesting for optical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2453–2461, 2009     

Innovative mechanical device for the post-tensioning of glass fiber reinforced polymer bars for masonry type retrofit applications

A mechanical device specially designed for the application of low-level post-tensioning forces to glass fiber reinforced polymer (GFRP) bars has been developed at the University of Missouri-Rolla. Some of the advantageous features of this device are that it is simple to assemble and the low-level post-tensioning forces can be applied manually and safely without the need for hydraulic jacks or heavy equipment. This device has been conceived with the main objective of retrofitting masonry buildings, some of which remain in service despite large, open cracks leading to considerable instability and serviceability concerns. According to the method derived in this paper, GFRP bars are installed in artificially imposed grooves and then post-tensioned with low-level stresses with the main objective to partially close these cracks, such that the serviceability and in-plane capacity of un-reinforced masonry (URM) buildings may be regained. In this paper we describe the mechanical components of this device, along with its advantageous features and potential application for the retrofit of URM walls.