Synthesis and Characterization of Silica@Copper Core–Shell Nanoparticles: Application for Conjugate Addition Reactions

Silica@copper (SiO₂@Cu) core–shell nanoparticles were synthesized and well characterized by XRD, TEM, AFM, XPS, UV/Vis, TGA–MS, and ICP–AES techniques. The synthesized SiO₂@Cu core–shell nanoparticles were employed as catalysts for the conjugate addition of amines to α,β‐unsaturated compounds in water to obtain β‐amino carbonyl compounds in excellent yields in shorter reaction times. Furthermore, the catalyst works well for hetero‐Michael addition reactions of heteroatom nucleophiles such as thiols to α,β‐unsaturated compounds. As the reaction is performed in water, it allows for easy recycling of the catalyst with consistent activity.     

Based on MFe2O4 (M=Co,Cu, and Ni): Magnetically recoverable nanocatalysts in synthesis of heterocyclic structural scaffolds

Abstract

Catalysis research under magnetically recoverable nanocatalysts is a well-known topic in organic synthesis. In recent times, catalysis research has clearly experienced a renaissance in the area of utility of ferrite nanoparticles based on their ability to recovery and reusability. In this review, the focus is on the fabrication, characterization and of application the MFe₂O₄ (M=Co, Cu, and Ni) nanocatalysts in synthesis of heterocyclic structural scaffolds.     

Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.     

浸渍溶剂对Pt/炭-氧化铝催化氢化2-氧-4-苯基丁酸乙酯的影响

螯合辅助溶剂挥发共组装法制备的炭-氧化铝复合材料为载体,分别使用水、乙醇或二者混合物为氯铂酸的分散介质,浸渍制备炭-氧化铝复合材料负载Pt催化剂.通过XRD,N2物理吸附以及TEM表征可知,乙醇作为浸渍溶剂时,最有利于Pt的分散,而混合溶剂浸渍制备的催化剂Pt颗粒最大.2-氧-4-苯基丁酸乙酯不对称加氢反应结果表明,氯铂酸水溶液浸渍得到的催化剂Pt纳米粒子的粒径有利于获得高的光学选择性,催化剂经辛可尼丁修饰后,以乙酸为反应溶剂,可获得最高84.8%的光学选择性.此外,该催化剂重复利用性能优异,可以重复利用22次,活性没有下降.     

Reusable zinc oxide nanoflowers for the synthesis of α-aminophosphonates under solvent-free ultrasonication

A simple wet chemical method is used to prepare zinc oxide nanoflowers (ZnO NFs) which were subjected to various characterization techniques such as XRD, FTIR, UV–Vis, FE-SEM, and XPS. XRD pattern indicates pure, crystalline, and monodispersed form with hexagonal wurtzite phase. The 3-D flower shape morphology with hexagonal ZnO nanorods was confirmed in FE-SEM. The synthesized ZnO NFs was used to study catalytic behavior in Kabachnik–Fields reaction under controlled ultrasound cavitation technique. High surface-to-volume ratio of ZnO NFs and the effect of ultrasonication enhances the yield of α-aminophosphonate. The catalyst was recycled and reused four times without any significant loss of its catalytic activity. Moreover, existing method becomes attractive and practical due to its easy, clean, fast, cost-effective, and eco-friendly procedure.     

多级孔WO3/ZrO2固体酸催化剂的制备与表征

采用复合模板表面活性剂辅助水热法一步合成了WO3/ZrO2多级孔固体酸催化剂,并应用X射线衍射、低温N2吸附-脱附、拉曼光谱及NH3程序升温脱附对催化剂进行了表征.结果表明,WO3的引入使得WO3/ZrO2催化剂的比表面积增大,表面的酸中心明显增加.在乙酸和正丁醇的酯化反应中,WO3/ZrO2多级孔固体酸催化剂表现出较...     

软件能重用性和C语言

软件能重用性是提高软件开发生产率和质量的关键之一。本文研究了C语言中有利于软件成分重用的特点和不利于软件成分重用的因素,提出了判断C语言模块能重用性的准则和提高其重用性的技术,并给出了典型的实例加以说明。     

Amberlyst-15? in PEG: A novel catalytic system for the facile and efficient one-pot synthesis of benzothiazolo-[2,3-b]-quinazolinone derivatives

A simple and convenient approach for the synthesis of tetraheterocyclic benzothiazolo-[2,3-b]-quinazolin-1-ones has been developed utilizing the MCR methodology, which involves the condensation of 2-aminobenzothiazole, cyclic-diketones and various aldehydes using Amberlyst-15 in PEG 400 as an environmentally benign and reusable catalyst system. Environmental benignity, recyclability, cost-effectiveness, easy workup and excellent yields are the major attributes of this one-pot procedure.     

漆酶在纳米金溶胶/多重壁碳纳米管复合载体上固定方法的比较及粒子尺寸效应

以纳米金溶胶（NGS）和多重壁碳纳米管（MWCNTs）的共混物(NGS/MWCNTs)作为固定漆酶的载体,研究了3种固定漆酶方法在酶固定量、比活力上的差异。 研究了不同的固定方法对固定酶热稳定性和重复使用性及纳米金溶胶颗粒粒径对酶固定量和固定酶动力学参数的影响。 实验结果表明,NGS/MWCNTs具有良好的固定漆酶能力和高固酶比活力,NGS/MWCNTs（NGS粒径37 nm）通过简单物理吸附法固定漆酶的量和固酶的比活力最高,分别可达33.80 mg/g和9.433 U/mg。 在NGS-MWCNTs上采用化学键合方法固定的漆酶在70 ℃放置2 h后仍然保持初始活力的75％,重复使用20次后仍保持初始活力的70％。 纳米金溶胶粒子越小（24 nm）,底物和固定漆酶间亲和力越好（KM=0.027 mmol/L）,表观速率常数越大。     

一种可直接使用的磁性光热纳米流体

本文通过"两步法"制备了一种具有高光热转换效率的Fe304-H20磁性纳米流体。该纳米流体可以通过磁分离技术实现纳米颗粒与基液的分离,使得纳米流体基液得以直接使用,同时具有优异的可重复利用性能。实验结果表明,在1200 s内其光热转化效率高达70.2%,并且经过60次的循环使用后无明显的衰减。此研究结果为实现纳米流体基液的直接应用提供了可行性的方案。