Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

Novel Copolymers of 2-Phenyl-1,1-dicyanoethylene with 4-Fluoro- and Pentafluorostyrene

Copolymerization of 2-phenyl-1,1-dicyanoethylene (PDE) with 4-fluorostyrene and pentafluorostyrene in solution with radical initiation (ABCN) at 70°C yielded random copolymers with PDE alternating units. The composition of the copolymers was calculated from nitrogen analysis and the structure was analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) and the tendency toward alternation of monomer units in the copolymer for these two monomers, is 4-fluorostyrene (1.96) > pentafluorostyrene (0.51). Higher glass transition temperature of the copolymers in comparison with that of homopolymers indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit.     

An atom-based explanation for the absence of excimer emission in the fluorescence of dilute solutions of poly(pentafluorostyrene)

The steady-state fluorescence emission spectrum of poly(pentafluorostyrene) in dilute fluid solution shows no excimer emission. An atomic level modeling study explains why this polymer cannot form an excimer. Repulsive Coulombic interactions prohibit the attainment of the extensive overlap of the two rings in the classic face-to-face sandwich conformation of a singlet excimer.     

Copolymerization of 2,3,4,5,6‐Pentafluorostyrene and Methacrylic Acid by Nitroxide‐Mediated Polymerization: The Importance of Reactivity Ratios

Amphiphilic block copolymers of 2,3,4,5,6‐pentafluorostyrene (PFS) and methacrylic acid (MAA) are synthesized via nitroxide‐mediated polymerization (NMP). It is established that to obtain a controlled copolymerization a minimum of 40 mol% of PFS is required, which is significantly greater than other copolymerization systems such as using 4.5–8 mol% styrene or 1 mol% of 9‐(4‐vinylbenzyl)‐9H‐carbazole to control the copolymerization of methacrylates. It is surmised that this lack of control is due to the reactivity ratios that favor the addition of MAA rather than PFS (r_PFS = 0.14, r_MAA = 6.97). However this reactivity ratio pair suggests that a one‐shot delayed injection approach can be utilized to synthesize almost pure block copolymers in one pot. Therefore, poly(PFS)‐b‐(PFS‐ran‐MAA) block copolymers are synthesized by a one‐shot delayed addition of MAA. While the concentration of irreversibly terminated chains is evident these results suggest a promising route to the synthesis of fluorinated amphiphilic block copolymers by NMP.

     

Regio- and Stereo-selective Silylcarbonylation of Pentafluorostyrene

The Co_2(CO)_8 catalyzed reaction of pentafluorostyrene with triethylsilane and carbon monoxide gives a perfluorophenyl enol silyl ether as a mixture of regio- and stereo-isomers.     

Synthesis,isolation, and thermal behavior of polybutadiene grafted with poly(2,3,4,5,6‐pentafluorostyrene)

2,3,4,5,6‐Pentafluorostyrene (PFS) was copolymerized with polybutadiene (PB) in tetrahydrofuran using benzoyl peroxide as the initiator at 50, 60, and 80 °C. The copolymerizations follow typical radical polymerization kinetics and behavior. The grafting parameters were evaluated as a function of monomer conversion, initiator concentration, and/or temperature by gel permeation chromatography of directly injected copolymerization mixtures. The grafting efficiencies and grafting ratios are most consistent with a system that terminates by combination and whose graft sites are generated by hydrogen abstraction of allylic radicals by primary initiator radicals. Pure graft copolymers were isolated by extracting unreacted PB into hexanes and PPFS homopolymer into acetone. The similarity of the glass transition temperatures of the PPFS grafts and the corresponding extracted PPFS homopolymers confirms that their lengths are approximately equal. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2874–2891, 2005     

On the Orthogonality of Two Thiol‐Based Modular Ligations

The chemoselectivity of two thiol‐based modular ligations operating under mild conditions is assessed. For this purpose, a macromolecular scaffold possessing allyl and pentafluorophenyl groups in two distinct parts is employed, which enables facile characterization by NMR spectroscopy (¹H and ¹⁹F) and size‐exclusion chromatography. By using appropriate triggers (introduction of a base or light irradiation), it is possible to direct thiols to an arbitrarily chosen part of the scaffold, without any change to the other part and with no involvement of protecting group chemistry. Dual functionalization experiments are achieved by applying these triggers consecutively with no consideration of the reaction sequence order, evidencing full bidirectionality. A set of one‐pot, purification‐free procedures that enable near‐quantitative to full dual functionalization in (very) short reaction times (17–180 min) is also presented.     

Preparation and Pyroelectric Properties of Poly(pentafluorostyrene)-r-Poly(4-vinylaniline) Copolymer Films

Abstract: In this study poly(pentafluorostyrene)-ran-poly(4-vinylaniline) (PPFS-r-PVA) was synthesized by solution polymerization with AIBN utilized as an initiator. The dilute THF solution of the resultant copolymer was spin-coated onto clean Ag/Si(100) substrates, and then the copolymer film was electrically poled at 85 °C for 30 min using a plane poling method with a poling voltage of 7.0 kV. The pyroelectric coefficient was determined by a digital integral method and carried out with a charge integral instrument. It was observed that the average pyroelectric coefficient of the resultant PPFS-r-PVA was 20.4 µC/cm²K in the range of 20–45 °C, and the average dielectric loss is about 0.2298 between 3.2 × 10⁴–1.0 × 10⁶ Hz.