2. Mitteilung: Tetraphenylarsoniumverbindungen und Pentaphenylarsen

Es wurde ein Trennverfahren ausgeabeitet, das es gestattet, die Aktivitätsausbeuten für Mono-, Di- und Triphenylarsenverbindungen, für Tetraphenylarsoniumverbindungen und für Pentaphenylarsen sowie für nicht organisch gebundenes Arsen in neutronenbestrahlten Tetraphenylarsoniumver erbindungen und in Pentaphenylarsen zu bestimmen. Als Trennmethoden werden Extraktion, Ionenaustauwsch und Al₂O₃-Chromatographic benutzt. Zur Reinigung und Ausbeutebestimmung von Di- und Triphenylarsenprodukten sowie von Tetraphenylarsonimverbindungen finden Kristallisations- bzw. Fällungsreaktionen Anwendung unter Ausnutzung des Prinzips der Isotopenverdünnungsanalyse.     

An empirical formula for scattered neutron components in fast neutron radiography

Scattering neutrons are one of the key factors that may affect the images of fast neutron radiog- raphy. In this paper, a mathematical model for scattered neutrons is developed on a cylinder sample, and an empirical formula for scattered neutrons is obtained. According to the results given by Monte Carlo methods, the parameters in the empirical formula are obtained with curve fitting, which confirms the logicality of the empirical formula. The curve-fitted parameters of common materials such as <'6>LiD are given.     

Die aktivierungsanalytische Bestimmung von Verunreinigungen in Platin

Ein Bericht über die aktivierungsanalytische Bestimmung des Cu, Au, Ir, Os und Ru in Platin durch radiochemische Trennung und gammaspektrometrische Strahlungsmessung. Aufbau eines radiochemischen Trenungsganges durch Verflüchtigung der Tetroxide des Os und Ru, Beseitigung der Matrixaktivität durch Adsorption am Anionenaustauscher, Extraktion des Au, Cu u. a. Elemente als Chloro-, DDTC- und BPHA-Komplexe. Diskussion der Möglichkeiten für den Einsatz des Trennungsganges in der Aktivierungsanalyse. Wiedergabe der Arbeitsvorschrift und der Ergebnisse der Analyse einiger Platinproben mit Verunreinigungen im Bereich von 0,05…400 ppm.     

Measurement of lithium diffusion coefficient in thin metallic multilayer by neutron depth profiling

Diffusion of Li ions in thin sandwich films with copper or lead encompassing layers (obtained by ion beam sputtering deposition technique) has been studied. These metals are promising candidates for electrodes in lithium-ion batteries. It is because they exhibit an ability to store and release Li ions during charging and discharging processes. Lithium diffusion was induced in samples by thermal annealing cycles. The lithium depth profile was measured using a nondestructive neutron depth profiling technique after each thermal annealing step. The analysis of experimental data allowed to evaluate the lithium depth profiles and directly calculate the diffusion coefficients.     

Measurement of the electric form factor of the neutron at Q2 = 0.3-0.8 (GeV/ c) 2 ⋆

The electric form factor of the neutron, G_E,n, has been measured at the Mainz Microtron by recoil polarimetry in the quasielastic D(¯e, e¯n)p reaction. Three data points have been extracted at squared four-momentum transfers Q ² = 0.3, 0.6 and 0.8 (GeV/c)². Corrections for nuclear binding effects have been applied.This revised version was published online in March 2005. In the previous version, the email address of one author was inadvertently assigned to multiple authors.     

Extraction of the neutron charge form factor G<Superscript>n</Superscript><Subscript>E</Subscript>(Q<Superscript>2</Superscript>) from the charge form factor of deuteron G<Superscript>d</Superscript><Subscript>C</Subscript>(Q<Superscript>2</Superscript>)

We extract the neutron charge form factor G ⁿ _E(Q ²) from the charge form factor of deuteron G ^d _C(Q ²) obtained from T ₂₀(Q ²) data at 0≤Q ²≤ 1.717 (GeV/c)². The extraction is based on the relativistic impulse approximation in the instant form of the relativistic Hamiltonian dynamics. Our results (12 new points) are compatible with existing values of the neutron charge form factor of other authors. We propose a fit for the whole set (36 points) taking into account the data for the slope of the form factor at Q ² = 0. Received: 26 July 2002 / Accepted: 18 September 2002 / Published online: 4 February 2003 RID="a" ID="a"e-mail: krutov@ssu.samara.ru RID="b" ID="b"e-mail: troitsky@theory.sinp.msu.ru Communicated by V.V. Anisovich     

The HERMES Recoil Detector

The HERMES Collaboration installed a new Recoil Detector to upgrade the existing spectrometer to study hard exclusive processes which provide access to generalised parton distributions (GPDs) and hence to the orbital angular momentum of quarks. The HERMES Recoil Detector mainly consists of three components: a silicon detector surrounding the target cell inside the beam vacuum, a scintillating fibre tracker and a photon detector with three layers of tungsten and scintillator bars in three different orientations. All three detectors are located inside a solenoidal magnet which provides a 1T longitudinal magnetic field. The Recoil Detector was installed in January 2006 and data taking will last until July of 2007.     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.