Application of directed metalation in synthesis. Part 7: Synthesis of suitably functionalised benzo[b]thiophenes as key intermediates in the synthesis of benzothienopyranones

One-pot syntheses of (3-hydroxybenzo[b]thiophen-2-yl) aryl methanones from ortho-methylsulfanylaryl N,N-diethyl amides and of 1-(3-hydroxybenzo[b]thiophen-2-yl)ethanone and 1-(3-hydroxybenzo[b]thiophen-2-yl)propan-1-one via an anionic ortho-Fries rearrangement are described. The hydroxy ketones were used as key intermediates in the synthesis of benzothienopyranones.     

Complete Photochromic Structural Changes in Ruthenium(II)?Diimine Complexes,Based on Control of the Excited States by Metalation

The thermal and photochemical reactions of a newly synthesized complex, [Ru^II(TPA)(tpphz)]²⁺ ( 1 ; TPA=tris(2‐pyridylmethyl)amine, tpphz=tetrapyrido[3,2‐a:2′,3′‐c:3′′,2′′‐h: 2′′′,3′′′‐j]phenazine), and its derivatives have been investigated. Heating a solution of complex 1 (closed form) and its derivatives in MeCN caused the partial dissociation of one pyridylmethyl moiety of the TPA ligand and the resulting vacant site on the Ru^II center was occupied by a molecule of MeCN from the solvent to give a dissociated complex, [Ru^II(η³‐TPA)(tpphz)(MeCN)]²⁺ ( 1′ , open form), and its derivatives, respectively, in quantitative yields. The thermal dissociation reactions were investigated on the basis of kinetics analysis, which indicated that the reactions proceeded through a seven‐coordinate transition state. Although the backwards reaction was induced by photoirradiation of the MLCT absorption bands, the photoreaction of complex 1′ reached a photostationary state between complexes 1 and 1′ and, hence, the recovery of complex 1 from complex 1′ was 67 %. Upon protonation of complex 1 at the vacant site of the tpphz ligand, the efficiency of the photoinduced recovery of complex 1 +H⁺ from complex 1′ +H⁺ improved to 83 %. In contrast, dinuclear μ‐tpphz complexes 2 and 3 , which contained the Ru^II(TPA)(tpphz) unit and either a Ru^II(bpy)₂ or Pd^IICl₂ moiety on the other coordination edge of the tpphz ligand, exhibited 100 % photoconversion from their open forms into their closed forms ( 2′ → 2 and 3′ → 3 ). These results are the first examples of the complete photochromic structural change of a transition‐metal complex, as represented by complete interconversion between its open and closed forms. Scrutinization by performing optical and electrochemical measurements allowed us to propose a rationale for how metal coordination at the vacant site of the tpphz ligand improves the efficiency of photoconversion from the open form into the closed form. It is essential to lower the energy level of the triplet metal‐to‐ligand charge‐transfer excited state (³MLCT*) of the closed form relative to that of the triplet metal‐centered excited state (³MC*) by metal coordination. This energy‐level manipulation hinders the transition from the ³MLCT* state into the ³MC* state in the closed form to block the partial photodissociation of the TPA ligand.     

Phosphorescent Cyclometalated Iridium(III) Complexes That Contain Substituted 2‐Acetylbenzo[b]thiophen‐3‐olate Ligand for Red Organic Light‐Emitting Devices

We report the synthesis of a new class of thermally stable and strongly luminescent cyclometalated iridium(III) complexes 1 – 6 , which contain the 2‐acetylbenzo[b]thiophene‐3‐olate (bt) ligand, and their application in organic light‐emitting diodes (OLEDs). These heteroleptic iridium(III) complexes with bt as the ancillary ligand have a decomposition temperature that is 10–20 % higher and lower emission self‐quenching constants than those of their corresponding complexes with acetylacetonate (acac). The luminescent color of these iridium(III) complexes could be fine‐tuned from orange (e.g., 2‐phenyl‐6‐(trifluoromethyl)benzo[d]thiazole (cf₃bta) for 4 ) to pure red (e.g., lpt (Hlpt=4‐methyl‐2‐(thiophen‐2‐yl)quinolone) for 6 ) by varying the cyclometalating ligands (C‐deprotonated C^N). In particular, highly efficient OLEDs based on 6 as dopant (emitter) and 1,3‐bis(carbazol‐9‐yl)benzene (mCP) as host that exhibit stable red emission over a wide range of brightness with CIE chromaticity coordinates of (0.67, 0.33) well matched to the National Television System Committee (NTSC) standard have been fabricated along with an external quantum efficiency (EQE) and current efficiency of 9 % and 10 cd A^?1, respectively. A further 50 % increase in EQE (>13 %) by replacing mCP with bis[4‐(6H‐indolo[2,3‐b]quinoxalin‐6‐yl)phenyl]diphenylsilane (BIQS) as host for 6 in the red OLED is demonstrated. The performance of OLEDs fabricated with 6 (i.e., [(lpt)₂Ir(bt)]) was comparable to that of the analogous iridium(III) complex that bore acac (i.e., [(lpt)₂Ir(acac)]; 6 a in this work) [Adv. Mater.­ 2011 , 23, 2981] fabricated under similar conditions. By using ntt (Hnnt=3‐hydroxynaphtho[2,3‐b]thiophen‐2‐yl)(thiophen‐2‐yl)methanone) ligand, a substituted derivative of bt, the [(cf₃bta)₂Ir(ntt)] was prepared and found to display deep red emission at around 700 nm with a quantum yield of 12 % in mCP thin film.     

Direct Addition of Grignard Reagents to Aliphatic Carboxylic Acids Enabled by Bulky turbo-Organomagnesium Anilides

The synthesis of ketones through addition of organometallic reagents to aliphatic carboxylic acids is a straightforward strategy that is limited to organolithium reagents. More desirable Grignard reagents can be activated and controlled with a bulky aniline-derived turbo-Hauser base. This operationally simple procedure allows the straightforward preparation of a variety of aliphatic and perfluoroalkyl ketones alike from functionalized alkyl, aryl and heteroaryl Grignard reagents.     

Wet-Chemically Prepared Porphyrin Layers on Rutile TiO2(110)

Porphyrins are large organic molecules that are interesting for different applications, such as photovoltaic cells, gas sensors, or in catalysis. For many of these applications, the interactions between adsorbed molecules and surfaces play a crucial role. Studies of porphyrins on surfaces typically fall into one of two groups: (1) evaporation onto well-defined single-crystal surfaces under well-controlled ultrahigh vacuum conditions or (2) more application-oriented wet chemical deposition onto less well-defined high surface area surfaces under ambient conditions. In this study, we will investigate the wet chemical deposition of 5-(monocarboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP) on well-defined rutile TiO₂(110) single crystals under ambient conditions. Prior to deposition, the TiO₂(110) crystals were also cleaned wet-chemically under ambient conditions, meaning none of the preparation steps were done in ultrahigh vacuum. However, after each preparation step, the surfaces were characterized in ultrahigh vacuum with X-ray photoelectron spectroscopy (XPS) and the result was compared with porphyrin layers prepared in ultrahigh vacuum (UHV) by evaporation. The differences of both preparations when exposed to zinc ion solutions will also be discussed.     

Synthesis and Ambiphilic Reactivity of Metalated Diorgano-Phosphonite Boranes

Unprecedented metalated phosphonite boranes were prepared from PH-substituted precursors and silyl amides. Although potassium derivatives were thermally stable and could even be isolated and structurally characterised, lithiated analogues proved to be unstable towards self-condensation under cleavage of LiOR at ambient temperature. Reaction studies revealed that the metalated phosphonite boranes exhibit ambiphilic character. Their synthetic potential as nucleophilic building blocks was demonstrated in the synthesis of the first stannylated phosphonite representing a new structural motif in phosphine chemistry.     

Full Functionalization of the Imidazole Scaffold by Selective Metalation and Sulfoxide/Magnesium Exchange

A simple, flexible, and straightforward method for the functionalization of all the positions of the imidazole heterocycle through regioselective arylations, allylations, acylations, and additions to aldehydes is disclosed. Starting from the readily available key imidazole 1 , highly functionalized imidazole derivatives have been synthesized in a regioselective manner from directed metalations and a sulfoxide/magnesium exchange. Moreover, the selective N3‐alkylation followed by deprotection of N1 (trans‐N‐alkylation) allows the regioselective N‐alkylation of complex imidazoles.