非共沸制冷剂R417A在水平光滑管内的沸腾传热

应用一种快速、准确的隐式格式迭代数值计算方法 ,对非共沸制冷剂 R41 7A在水平光滑管内的蒸发过程进行了数值模拟。通过应用纯质的传热公式计算后与实验值相比较 ,数值计算结果高于实验值。     

纳米颗粒悬浮液池内泡状沸腾的实验研究

本文对纳米颗粒悬浮液在平壁面上池内沸腾进行了实验研究。实验用的纳米粒子为26 nm的铁粉和13 nm的三氧化二铝纳米粉末,基液为去离子水。分别配成体积浓度为0．1％, 1％和2％的悬浮液。实验结果表明,纳米悬浮颗粒对液体沸腾换热过程的影响会随着纳米颗粒性质,颗粒浓度及热流密度大小的不同而出现不同的效果;加入纳米颗粒后, 对基液沸腾换热的影响存在着两个相反的作用机制,它们分别为:纳米颗粒增强了液体内部的热量迁移能力(热物性的影响)和改变了加热面的表面结构特性(加热面特性的影响)。     

Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

用拓扑指数S_i研究碳氢化合物的沸点(Ⅲ)

定义了拓扑指数Ｓｉ（ｉ＝１，２，３，４），并选取包含双、三键、环及苯环的碳氢化合物为研究对象，计算了这些化合物的拓扑指数Ｓｉ，同时用Ｓｉ相关了它们的沸点．结果较文献值有所改善．并从Ｓｉ中筛选出了Ｓ     

考虑流体湿润性影响的核沸腾RohsenoW修正模型

添加界面活性剂的核沸腾在改变蒸气泡生长特性的同时，主要是强化了对流换热．本文考虑流体湿润性影响，对核沸腾换热沿用最广的对流类比模型－Ｒｏｈｓｅｎｏｗ模型进行了修正．通过对实验数据的检验，表明修正后的模型预示值与实测结果吻合很好．     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

分子诱导效应指数与链烷烃的沸点

利用基团的诱导效应指数，首次提出了分子的诱导效应指数的概念，并定义了 链烷烃的有效碳链长度NC＝（MIs,N/MIb,N)·N，式中MIs,N,MIb,N分别为直链和支 链异构体的分子诱导效应指数。研究结果表明，链烷烃的沸点Tb(℃）与NC关系是 ：1n(806.5-Tb)=6.9824-0.11431NC^2/3     

不饱和链烃沸点的拓扑研究

基于邻接矩阵与边价 (fi)定义边价连接性指数 ( mF) ,其中的0 F ,1 F与 2 94种不饱和链烃 (包括烯烃、炔烃及烯炔烃 )的沸点 (Tb)关联 ,得到良好的数学模型 :ln( 70 0 -Tb) =6 5 2 3 3 1-0 0 0 4880 F2 -0 3 46771 F0 5(n =2 94,R =0 9979,R2 =0 995 8,F =3 490 4,S =5 12 ) ,该回归模型经Jackknife法检验具有总体稳健性 .可以预示 ,该指数将在定量构效关系研究中成为重要参数 .     

The boiling point and molar enthalpy of vaporization of fluorint FC-70 N(C5F11)3

N(C₅F₁₁)₃ (Fluorint FC-70) has been chosen as the test material to compare the chemicophysical data obtained by static-sample and DSC methods. The normal boiling point, the molar enthalpy of vaporization, and the constants of the Antoine equation of fluorint FC-70 are reported. DSC can be developed into a simple and rapid routine instrument to determine the enthalpy of vaporization as well as the boiling point of liquid, particularly at relative high temperature.     

气相色谱法同步测定煤基油品的硫分布和沸点分布

应用火焰光度检测器与氢焰检测器偶联技术，通过对模拟蒸馏法的拓展，利用气相色谱仪同步测定了煤基油品的硫分布、沸点分布和总硫含量。结果表明：油品测定的准确性和重复性均较好，沸点分布、硫分布和总硫含量的最大相对标准偏差分别为0．47％、1．01％和2．51％。本方法需要样品量小，操作简便，比较适合于实验室煤基油品的分析研究。