分段滤波用于消除脉搏血氧检测中多种运动干扰的研究

脉搏血氧饱和度检测仪可以无损、实时地检测动脉血液中的含氧百分比,从而快速对人体的呼吸状况以及心肺功能作出判断,但其检测精度极易受到测试部位运动的影响.人体测试部位的运动大致可以分为突发性运动干扰以及周期性的运动干扰.突发性干扰表现在局部脉搏波的波形突变上,而周期性的干扰体现在多个局部脉搏波的波形的周期性变化上.文章有针对性地提出了一种将微分阈值分段与迭带中值滤波相结合的方法来剔除突发扰动的方法,并且在上诉方法上再加上一级多点移动平滑以消除周期性运动干扰.实验证明该方法在消除多种运动伪差上有着较好的效果,且该方法计算简单,易于实现,有着一定的实际应用价值.     

一种简便的计算层析系统X射线硬化校正方法

以实物拍摄为依据,用一种最简便的修正方法解决计算机X射线层析术成像时由于硬化效应引起的切片图灰度失真问题。用高性能数字X射线机FAXITRON MX-20(射线管焦点20μm,探测板灰度等级16位)对不同厚度的物体进行透射成像,测得对应的透射光强度,并利用新创的指数拟合法得到理想的拟合曲线,由此推导硬化效应的指数校正公式;最后利用实验室的微型计算机层析设备进行扇形束扫描,并逆投影重建生成计算层析断层图像,验证了该校正方法的实用性。该指数拟合法的误差不到常用的二阶多项式拟合法的1/3,对物体计算层析重构,硬化校正以前有明显的“杯状”伪迹,切片灰度不均匀,用指数法修正以后该伪迹消失,切片灰度均匀。     

Standard artifact for the geometric verification of terrestrial laser scanning systems

Terrestrial laser scanners are geodetic instruments with applications in areas such as architecture, civil engineering or environment. Although it is common to receive the technical specifications of the systems from their manufacturers, there are not any solutions for data verification in the market available for the users. This work proposes a standard artifact and a methodology to perform, in a simple way, the metrology verification of laser scanners.The artifact is manufactured using aluminium and delrin, materials that make the artifact robust and portable. The system consists of a set of five spheres situated at equal distances to one another, and a set of seven cubes of different sizes. A coordinate measuring machine with sub-millimetre precision is used for calibration purposes under controlled environmental conditions. After its calibration, the artifact can be used for the verification of metrology specifications given by manufacturers of laser scanners.The elements of the artifact are destinated to test different metrological characteristics, such as accuracy, precision and resolution. The distance between centres of the spheres is used to obtain the accuracy data, the standard deviation of the top face of the largest cube is used to establish the precision (repeatability) and the error in the measurement of the cubes provides the resolution value in axes X, Y and Z. Methodology for the evaluation is mainly supported by least squares fitting algorithms developed using Matlab programming.The artifact and methodology proposed were tested using a terrestrial laser scanner Riegl LMSZ-390i at three different ranges (10, 30 and 50 m) and four stepwidths (0.002°, 0.005°, 0.010° and 0.020°), both for horizontal and vertical displacements. Results obtained are in agreement with the accuracy and precision data given by the manufacturer, 6 and 4 mm, respectively. On the other hand, important influences between resolution and range and between resolution and stepwidth are observed. For example, the two smaller cubes cannot be well detected in any case and, as must be expected, the increase in range and stepwidth produces a decrease in the quality of the detection for the larger ones.     

Combination of HAADF‐STEM and ADF‐STEM Tomography for Core–Shell Hybrid Materials

Characterization of core–shell type nanoparticles in 3D by transmission electron microscopy (TEM) can be very challenging. Especially when both heavy and light elements coexist within the same nanostructure, artifacts in the 3D reconstruction are often present. A representative example would be a particle comprising an anisotropic metallic (Au) nanoparticle coated with a (mesoporous) silica shell. To obtain a reliable 3D characterization of such an object, a dose‐efficient strategy is proposed to simultaneously acquire high‐angle annular dark‐field scanning TEM and annular dark‐field tilt series for tomography. The 3D reconstruction is further improved by applying an advanced masking and interpolation approach to the acquired data. This new methodology enables us to obtain high‐quality reconstructions from which also quantitative information can be extracted. This approach is broadly applicable to investigate hybrid core–shell materials.     

On the classical solution of SO(3) gauge theory and ’t Hooft-Polyakov monopole

It is shown that the ansatz for the asymptotic (r → ∞) gauge fields used by ’t Hooft in the study of monopoles in SO(3) electroweak theory is not unique.     

Synthesis methods of multiple phase-cycled SSFP images to reduce the band artifact and noise more reliably

The band artifact in steady-state free precession can be reduced by synthesizing the multiple images obtained through different phase increments of successive radiofrequency pulses. Even though the complex summation method was reported to be effective in reducing the band artifact, it has the pitfalls of intensity abnormality and sensitivity to the phase abnormality. Two new methods have been developed for more reliable reduction of the band artifact than the complex summation method. One method is to sum the complex images partially and to take the maximum intensity of the partially summed images. The other method is to sum the free induction decay (FID) and primary echo components of the Fourier series that are obtained through Fourier analysis of the complex base images. Both proposed methods were compared with other magnitude (maximum intensity projection, spectrally decomposed synthesis, sum-of-squares, nonlinear averaging) and complex-based (complex summation, magnitude-weighted complex summation) methods experimentally at 3 T for the phantom and volunteer's head imaging. Both proposed methods were confirmed to maintain the advantage of the complex summation in reducing both the dark and bright band artifacts while reducing the intensity abnormality and sensitivity to the phase abnormality from that of the complex summation method over a wide range of flip angles and relaxation times.     

Artifact Reduction Based on Sinogram Interpolation for the 3D Reconstruction of Nanoparticles Using Electron Tomography

Electron tomography is a well‐known technique providing a 3D characterization of the morphology and chemical composition of nanoparticles. However, several reasons hamper the acquisition of tilt series with a large number of projection images, which deteriorate the quality of the 3D reconstruction. Here, an inpainting method that is based on sinogram interpolation is proposed, which enables one to reduce artifacts in the reconstruction related to a limited tilt series of projection images. The advantages of the approach will be demonstrated for the 3D characterization of nanoparticles using phantoms and several case studies.     

Desulfurization of phosphorothioate oligonucleotides via the sulfur‐by‐oxygen replacement induced by the hydroxyl radical during negative electrospray ionization mass spectrometry

While the occurrence of desulfurization of phosphorothioate oligonucleotides in solution is well established, this study represents the first attempt to investigate the basis of the unexpected desulfurization via the net sulfur‐by‐oxygen (S‐O) replacement during negative electrospray ionization (ESI). The current work, facilitated by quantitative mass deconvolution, demonstrates that considerable desulfurization can take place even under common negative ESI operating conditions. The extent of desulfurization is dependent on the molar phosphorothioate oligonucleotide‐to‐hydroxyl radical ratio, which is consistent with the corona discharge‐induced origin of the hydroxyl radical leading to the S‐O replacement. This hypothesis is supported by the fact that an increase of the high‐performance liquid chromatography (HPLC) flow rate and the on‐column concentration of a phosphorothioate oligonucleotide, as well as a decrease of the electrospray voltage reduce the degree of desulfurization. Comparative LC‐tandem mass spectrometry (MS/MS) sequencing of a phosphorothioate oligonucleotide and its corresponding desulfurization product revealed evidence that the S‐O replacement occurs at multiple phosphorothioate internucleotide linkage sites. In practice, the most convenient and effective strategy for minimizing this P = O artifact is to increase the LC flow rate and the on‐column concentration of phosphorothioate oligonucleotides. Another approach to mitigate possible detrimental effects of the undesired desulfurization is to operate the ESI source at a very low electrospray voltage to diminish the corona discharge; however this will significantly compromise sensitivity when analyzing the low‐level P = O impurities in phosphorothioate oligonucleotides. Copyright © 2012 John Wiley & Sons, Ltd.     

A Fast Approach to Removing Muscle Artifacts for EEG with Signal Serialization Based Ensemble Empirical Mode Decomposition

An electroencephalogram (EEG) is an electrophysiological signal reflecting the functional state of the brain. As the control signal of the brain–computer interface (BCI), EEG may build a bridge between humans and computers to improve the life quality for patients with movement disorders. The collected EEG signals are extremely susceptible to the contamination of electromyography (EMG) artifacts, affecting their original characteristics. Therefore, EEG denoising is an essential preprocessing step in any BCI system. Previous studies have confirmed that the combination of ensemble empirical mode decomposition (EEMD) and canonical correlation analysis (CCA) can effectively suppress EMG artifacts. However, the time-consuming iterative process of EEMD may limit the application of the EEMD-CCA method in real-time monitoring of BCI. Compared with the existing EEMD, the recently proposed signal serialization based EEMD (sEEMD) is a good choice to provide effective signal analysis and fast mode decomposition. In this study, an EMG denoising method based on sEEMD and CCA is discussed. All of the analyses are carried out on semi-simulated data. The results show that, in terms of frequency and amplitude, the intrinsic mode functions (IMFs) decomposed by sEEMD are consistent with the IMFs obtained by EEMD. There is no significant difference in the ability to separate EMG artifacts from EEG signals between the sEEMD-CCA method and the EEMD-CCA method (p > 0.05). Even in the case of heavy contamination (signal-to-noise ratio is less than 2 dB), the relative root mean squared error is about 0.3, and the average correlation coefficient remains above 0.9. The running speed of the sEEMD-CCA method to remove EMG artifacts is significantly improved in comparison with that of EEMD-CCA method (p < 0.05). The running time of the sEEMD-CCA method for three lengths of semi-simulated data is shortened by more than 50%. This indicates that sEEMD-CCA is a promising tool for EMG artifact removal in real-time BCI systems.     

3-T MR-guided brachytherapy for gynecologic malignancies

Gynecologic malignancies are a leading cause of death in women worldwide. Standard treatment for many primary and recurrent gynecologic cancer cases includes external-beam radiation followed by brachytherapy. Magnetic resonance (MR) imaging is beneficial in diagnostic evaluation, in mapping the tumor location to tailor radiation dose and in monitoring the tumor response to treatment. Initial studies of MR guidance in gynecologic brachytherapy demonstrate the ability to optimize tumor coverage and reduce radiation dose to normal tissues, resulting in improved outcomes for patients.