Completely biodegradable composites of poly(propylene carbonate) and short,lignocellulose fiber Hildegardia populifolia

The composites of biodegradable poly(propylene carbonate) (PPC) reinforced with short Hildegardia populifolia natural fiber were prepared by melt mixing followed by compression molding. The mechanical properties, thermal properties, and morphologies of the composites were studied via static and dynamic mechanical measurements, thermogravimetric analysis, and scanning electron microscopy (SEM) techniques, respectively. Static tensile tests showed that the stiffness and tensile strength of the composites increased with an increasing fiber content. However, the elongation at break and the energy to break decreased dramatically with the addition of short fiber. The relationship between the experimental results and the compatibility or interaction between the PPC matrix and fiber was correlated. SEM observations indicated good interfacial contact between the short fiber and PPC matrix. Thermogravimetric analysis revealed that the introduction of short Hildegardia populifolia fiber led to a slightly improved thermooxidative stability of PPC. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 666–675, 2004     

The synthesis,characterization, and weathering behavior of polycarbonates derived from bis(P-hydroxyphenyl) dimethylsilane (BPSI)

Polycarbonates and copolycarbonates based on BPSi and BPA were easily made using the standard interfacial technique. Molecular weight and NMR data indicate that up to 4 mol % of the BPSi decomposes during polymerization via a base-catalyzed rearrangement of BPSi to arylsiloxanes. Oxygen index studies show an increased flame resistance with increasing BPSi monomer content. DSC measurements show a decrease in glass transition with BPSi monomer concentration while TGA shows an increase in char residue with BPSi monomer content. In addition, TGA indicates no change in either thermal or thermooxidative stability with the relative BPSi/BPA concentrations. Outdoor weathering of BPSi PC and BPA PC films indicates that BPSi PC is ca. 5 times more weathering resistant than BPA PC. This latter result can be attributed to a combination of BPSi PC's lower UV absorptivity, higher water repellency, and lower likelihood for side chain photooxidation. © 1993 John Wiley & Sons, Inc.     

Alternating copolymerization of carbon dioxide and epoxide by manganese porphyrin: The first example of polycarbonate synthesis from 1-atm carbon dioxide

The first successful example of the formation of polycarbonate from 1-atm carbon dioxide and epoxide was demonstrated by the alternating copolymerization of carbon dioxide and epoxide with manganese porphyrin as a catalyst. The copolymerization of carbon dioxide and cyclohexene oxide with (porphinato)manganese acetate proceeded under the 1-atm pressure of carbon dioxide to give a copolymer with an alternating sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3549–3555, 2003     

Synthesis and characterization of poly(ethylene oxide‐co‐ethylene carbonate) macromonomers and their use in the preparation of crosslinked polymer electrolytes

Methacrylate‐functionalized poly(ethylene oxide‐co‐ethylene carbonate) macromonomers were prepared in two steps by the anionic ring‐opening polymerization of ethylene carbonate at 180 °C, with potassium methoxide as the initiator, followed by the reaction of the terminal hydroxyl groups of the polymers with methacryloyl chloride. The molecular weight of the polymer went through a maximum after approximately 45 min of polymerization, and the content of ethylene carbonate units in the polymer decreased with the reaction time. A polymer having a number‐average molecular weight of 2650 g mol^?1 and an ethylene carbonate content of 28 mol % was selected and used to prepare a macromonomer, which was subsequently polymerized by UV irradiation in the presence of different concentrations of lithium bis(trifluoromethanesulfonyl)imide salt. The resulting self‐supportive crosslinked polymer electrolyte membranes reached ionic conductivities of 6.3 × 10^?6 S cm^?1 at 20 °C. The coordination of the lithium ions by both the ether and carbonate oxygens in the polymer structure was indicated by Fourier transform infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2195–2205, 2006     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate

Polycarbonate (PC) was melt blended with small amount of liquid‐crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated that the GB addition increased the viscosity ratio and seemed unfavorable to the LCP fibrillation. However, the morphological observation showed that the LCP fibrillation was promoted by the GB addition and varied with the GB packing. With the increased GB packing by increasing the GB content and/or decreasing the GB diameter, LCP deformed from spheres and ellipsoids into stretched ellipsoids at lower shear rates and into long fibrils at higher shear rates. Although higher content of smaller GB jammed into the larger LCP droplets and inhibited the LCP fibrillation, very long LCP fibrils formed at higher shear rates at a high enough packing of GB. The relationship between GB packing and LCP fibrillation revealed two kinds of hydrodynamic effects of GB promoting the LCP fibrillation: at lower GB packing, the shear flow was enhanced by the high local shear between GB, in quantity; and for a high enough GB packing, the shear flow was changed, in quality, into elongational flow, which was more effective for the LCP fibrillation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1020–1030, 2006     

Molecular Recognition Study on a Supramolecular System. Part 21. Inclusion Complexation Thermodynamics of Aliphatic Alcohols by Organoselenium Modified β-Cyclodextrins

The spectrophotometric titrations have beenperformed at 25–40 °C in aqueous solution to give the complexstability constants and the thermodynamic parametersfor the stoichiometric 1 : 1 inclusion complexation ofvarious aliphatic alcohols withmono[6-(phenylseleno)-6-deoxy]--cyclodextrin (2),mono[6-(o-, m-,p-tolylseleno)-6-deoxy]--cyclodextrin (3–5),mono[6-(p-chloro-phenyl-seleno)-6-deoxy]--cyclodextrin(6), mono[6-(benzylseleno)-6-deoxy]--cyclodextrin (7) and mono[6-(naphthaleneseleno)-6-deoxy]--cyclodextrin(8). On thebasis of the present and previous results, themolecular binding abilities and selectivities forguest aliphatic alcohols of the host -cyclodextrinderivatives (2–8) are discussed comparatively and globallyfrom the thermodynamic point of view. Thethermodynamic parameters obtained are criticalfunctions of the size/shape of aliphatic alcohols, andthe position and type of the substituent introduced tothe aromatic ring of -cyclodextrin's sidearm,which are elucidatedin terms of the conformational, electrostatic,hydrogen-bonding, and hydrophobic effects.     

Sorption of aliphatic ketones from aqueous solutions by starch cryotextures

Capillary gas chromatography was applied to study the sorption of aliphatic ketones (C₆—C₁₁), including metamers, from aqueous solutions by corn starch cryotextures. The amount of ketones sorbed by cryotextures depends linearly on their concentrations in the initial sol. Equations describing the concentration dependence of sorption were proposed. The shape of sorption isotherms reflects the strength of sorption. The binding constants and the number of binding sites were determined for weakly sorbed ketones. The length of alkyl substituent and the position of the functional group are the crucial factors governing the sorption of ketones under conditions of excess binding sites. It was found that the degree of sorption increases with an increase in the carbon chain length from 6 to 9 carbon atoms. The presence of cooperation of binding sites for ketone sorption by cryotextures was demonstrated. The major part of ketones is sorbed irreversibly. This fact points to the formation of supramolecular complexes. Ketones with lower molecular masses are better sorbed by cryotextures than by native starch grains.     

Enzymatic Synthesis and Polymerization of Cyclic Trimethylene Carbonate Monomer with/without Methyl Substituent

The direct enzymatic synthesis of a cyclic trimethylene carbonate (1,3‐dioxane‐2‐one) monomer with/without a methyl substituent was carried out using dimethyl or diethyl carbonate and 1,3‐diol with the objective of producing aliphatic poly(trimethylene carbonate), a typical biodegradable synthetic plastic. The lipase‐catalyzed condensation of dimethyl or diethyl carbonate with aliphatic 1,3‐diols using immobilized Candida antarctica lipase (lipase CA) in an organic solvent at 70 °C afforded the corresponding methyl‐substituted and unsubstituted cyclic trimethylene carbonates. The cyclic trimethylene carbonates obtained by the reaction of dimethyl or diethyl carbonates with 1,3‐propanediol and 2‐methyl‐1,3‐propanediol were polymerized by lipase to produce the corresponding polycarbonates.

Total TMC yield as a function of the reaction time.     

Enthalpic determinations of aliphatic ester-solvent systems with correlations

Calorimetric measurements were carried out on ester-solvent systems where the esters were H(CH₂)_xCOO(CH₂)_yH, with x and y varying from 1 to 5, and the solvents were n-hexane and 1,2-dichloroethane. Calculation of the enthalpies of cavity formation enabled the enthalpies of interaction to be determined. Both enthalpies correlated with number of carbon atoms N, equal to x+y in the esters, giving for 1,2-dichloroethane