Crystal and Molecular Structure of OMPCTF

ＣｒｙｓｔａｌａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＯＭＰＣＴＦＷａｎｇＲｕｉ－Ｙａｏ；ＪｉｎＺｈｏｎｇ－Ｓｈｅｎｇ（ＬａｂｏｒａｔｏｒｙｏｆＲａｒｅＥａｒｔｈＣｈｅｍｉｓｔｒｙａｎｄＰｈｙｓｉｃｓ，ＣｈａｎｇｃｈｕｎＩｎｓｔｉｔｕｔｅｏｆＡ...     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

新型大环醚的合成——1,7-N,N′双取代-1,7-二氮-4,10,13-三氧环十五烷的合成

我们曾报道1,10-N,N’-双取代-1,10-二氮-4,7,13,16-四氧环十八烷(1)及1,7-N,N’-双取代-1,7-二氮-4,10-二氧环十二烷(2)二类大环聚醚的合成及其对碱金属离子的络合性能。     

Study on oxidation of polymers treated by high LET radiation

The oxidation of medical silicone rubber and segmented polyether urethane which were bombarded with 11.2 MeV Si⁺ or F⁺ at the dose of 5 × 10¹⁴ ions/cm² was studied. In XPS measurements, it was found that the oxygen concentration on the surface of the implanted polymeric membranes had been increasing in three months at least. ESR measurement showed that some free radicals existed in these membranes and their quantities decreased with time. Chemical analysis proved that peroxides were generated in the γ irradiated membranes. The reason for the increasing of oxygen concentration was that free radicals combined with oxygen in the air and produced peroxides on the membrane surface. Moreover, in order to demonstrate the radiation mechanism, low LET (γ rays) radiation of such polymeric membranes was carried out for comparison     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

聚酯聚醚嵌段共聚物与1,4-二咔唑环丁烷在激发态及基态的相互作用

<正> 聚酯聚醚嵌段共聚物具有十分良好的物理和机械性能,能加工成橡胶、纤维、塑料胶粘剂等,近年来也有作为医用高分子材料的报道。所以对聚酯聚醚嵌段共聚物的研究十分活跃。然而,有关其光物理性质的研究还很少见。本文报道了混合聚醚-聚酯嵌段共聚物(MPEE)与反式1,4-二咔唑环丁烷(1,4-DCC)在激发态和基态下的相互络合作用。结果表明,MPEE可以猝灭1,4-DCC的荧光,同时形成激基复合物。在分散     

镧系与二甘醇-二-(邻羟基苯基)醚配合物的合成与表征

本文合成14种镧系高氯酸盐及硝酸盐分别与二甘醇-二-(邻羟基苯基)醚(记为EO_2(HOP)_2,EO=ethylene oxide,HOP为邻羟基苯基)形成的新配合物,确证组成为Ln(ClO_4)_3·EO_2(HOP)_2·nH_2O(Ln:La-Eu,n=10,Ln:Gd,Dy-Tm,Y,n=7),La_3(NO_3)_9·(EO_2(HOP)_2)_2·3H_2O及La(ClO_4)_2·EO_2H(OP)_25H_2O。文中研究了配合物红外,紫外、~1HNMR谱及~(13)C纵向弛豫时间T_1等,并讨论了共存阴离子、溶剂及配体不同端基对成配的影响。     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

Activated bis- and tetrafluoroaromatic compounds containing bis-phenylquinoxaline fragments

New activated bis- and tetrafluoroaromatic compounds containing the bis-phenylquinoxaline fragments, viz., methylene-bis-6(7),6"(7")-{2-(p-fluoro)phenyl-3[4-(p-fluorobenzoyl)phenyl]quinoxalines}, were prepared according to multistep procedures with the use of chloral as the starting compound. The presence of the activating carbonyl groups in the para positions with respect to two fluorine atoms opens up the possibility of the use of these monomers for the synthesis of high-molecular-weight aromatic quinoxaline-containing polyether ketones.     

A concise route to the right wing of ciguatoxin

A concise route to the HIJKLM-ring fragment 10 of ciguatoxin (CTX) and 51-hydroxyCTX3C was developed in which oxiranyl anion addition and intramolecular carbonyl olefination were utilized as key transformations. The present procedure requires only 23 steps from the I-ring 5, while 35 steps were employed in a previous synthesis of the corresponding right wing 11 of CTX3C. The high efficiency of the present synthesis ensures a supply of 10 for total synthesis and biomedical applications.