Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Synthesis of 1-phenyi-1H-tetrazolo[4,5-d]tetrazole and 5-aryl-1-(4-bromophenyl)-1,2,4-triazolo[4,3-d]tetrazoles

l-Phenyl-lH-tetrazol-5-yIhydrazine (2) was reacted with nitrous acid to yield 1-phenyl-lH-tetrazolo[4,5-d]tetrazole (3). l-Arylidene-2-(l-phenyl-lH-tetrazol-5-yl)hydrazines (4) were generally reactive towards electrophilic reagents. When treated with bromine in acetic acid, 4 yielded mixtures of 1-arylidene-2-[1-(4-bromophenyl)-lH-tetrazol-5-yl]hydrazines (5a-d) and 2-[1-(4-bromophenyl)-lH-tetrazol-5-yl]hydrazidic bromides (6a-d). Solvolysis of 6a-d in aqueous acetone yielded 5-aryl-1-(4-bromophenyl)-1,2,4-triazolo[4,3-d]tetrazoles (7a-d). The structures of the synthesized compounds were confirmed on the basis of elemental analysis, IR and ¹H NMR data.     

Expeditive synthesis of homochiral fused tri- and tetrazoles-piperazines from β-amino alcohols

N-Cyanomethyl and N-propargyl β-amino alcohols are chlorinated with SOCl₂ and treated with NaN₃ in DMSO. A substitution/cycloaddition process affords in good yields, with high diastereoselectivity and a regioselectivity depending on the substitution pattern of the starting amino alcohol, fused tri- and tetrazoles-piperazines. These heterocycles were further lithiated with n-BuLi at the benzylic position and reacted diastereoselectively with a range of electrophiles.     

QSAR Correlations of the Algistatic Activity of 5-Amino-1-Aryl-1H-Tetrazoles

Abstract

The algistatic activity of 20 substituted 5-aminol-aryl-1H-tetrazoles was correlated with the second order Kier and Hall index, the XY shadow on the XY rectangle and the total hybridization component of the molecular dipole by the CODESSA program in a three parameter equation with r² = 0.9330.     

Acylimidazolides as Versatile Synthetic Intermediates for the Preparation of Sterically Congested Amides and Ketones: A Practical Synthesis of Proscar®

Acylimidazolides react with magnesium amides to produce car-boxamides in excellent yields, whereas Fe(III) catalyzed cross coupling between acylimidazolide and Grignard reagents produce ketones in high yields. These methods were utilized to prepare the α-reductase inhibitor Proscar® as well as various 17β-amide and ketone analogs of Δ¹-4-aza-5α-androsten-3-one.     

1,3-Bis(2-alkyltetrazol-5-yl)triazenes and their Fe(II), Co(II) and Ni(II) complexes: Synthesis,spectroscopy, and thermal properties. Crystal structure of Fe(II) and Co(II) 1,3-bis(2-methyltetrazol-5-yl)triazenide complexes

Complexes ML¹₂ and ML²₂, with M = Fe^II, Co^II, Ni^II, and 1,3-bis(2-R-tetrazol-5-yl)triazenide ligands L¹ (R = Me) and L² (R = ^tBu), have been synthesized by the reaction of corresponding 1,3-bis(2-R-tetrazol-5-yl)triazenes with metal(II) salts in basic media and characterized by IR, UV–Vis spectroscopy, thermal and X-ray diffraction analyses. Both 1,3-bis(2-R-tetrazol-5-yl)triazenes were found to deprotonate on coordination and act as tridentate chelating ligands forming distorted MN₆ octahedra around metal(II) cations.     

New Nitriminotetrazoles – Synthesis,Structures and Characterization

The reactions of 5‐nitriminotetrazole ( 4 ) with 1‐methyl‐5‐aminotetrazole ( 2 ) as well as 2‐methyl‐5‐aminotetrazole ( 3 ) were investigated. In the first reaction 2 was protonated yielding 1‐methyl‐5‐aminotetrazolium 5‐nitrimino‐1H‐tetrazolate monohydrate ( 7 ). In the latter case no protonation could be observed and a co‐crystallization of 5‐nitraminotetrazole and 2‐methyl‐5‐aminotetrazole was obtained. In this compound a new tautomer of 4 could be found. Both products were determined by low temperature single crystal X‐ray diffraction, IR, Raman and multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analysis as well as differential scanning calorimetry. In addition the heats of formation were calculated using experimentally obtained heats of combustion. With these and the X‐ray densities several detonation parameter were computed using the EXPLO5 software. In addition the sensitivities towards impact, friction and electrostatic discharge were determined. Further, two crystal structures of the important starting materials in energetic research 5‐nitriminotetrazole monohydrate ( 4 ·H₂O) and 1‐methyl‐5‐nitriminotetrazolemonohydrate ( 5 ·H₂O) are presented and compared with the water‐free compounds. The heats of formation of 4 , 4 ·H₂O, 5 , 5 ·H₂O have been calculated by the atomization method using the CBS basis set. Inclusion of crystal water decrease heats of formation about 265 kJ mol^?1. Also the influence of crystal water on sensitivities (impact, friction, electrostatic discharge) but also performance is discussed.     

Copper(II), palladium(II) and platinum(II) chloride complexes with 5-amino-2-tert-butyltetrazole: Synthesis, characterization and cytotoxicity

Complexes CuL₃Cl₂, PdL₂Cl₂ and PtL₂Cl₂, where L is a novel ligand from the series of 2-substituted 5-aminotetrazoles, namely 5-amino-2-tert-butyltetrazole (1), have been synthesized by the reaction of metal(II) chlorides with 1 and characterized by IR spectroscopy, thermal and X-ray analyses. The crystallographic structural analysis of these complexes revealed that 1 acts as a monodentate ligand coordinated to the metal via endocyclic N4 atom. Platinum complex demonstrates promising cytotoxicity against human cervical carcinoma cells with IC₅₀ value average between those of cisplatin and carboplatin.     

Strongly photoluminescent Eu(III) tetrazolate ternary complexes with phosphine oxides as powerful sensitizers

The Eu(III) cation forms electrically neutral photoluminescent complex with 5-(2-pyridyl-1-oxide)tetrazolate (PTO) anion. Although the photoluminescence properties of such tertiary Eu(III) and Tb(III) complexes were not as high (13 and 31% photoluminescence quantum yield, respectively) as reported for other diketonate lanthanide complexes probably because of high number of nitrogen atoms involved in PTO which leads to attachment of water molecules, reducing the luminescence quantum yield with vibrational and rotational quenching. Here, we report the removal of quencher molecules from the coordination sphere of tris–europium tetrazolate oxide complex by replacing them with various phosphine oxides which leads to improved photoluminescence quantum yield for the complexes by acting as auxiliary co-ligands with that of the main antenna 5-(2-pyridyl-1-oxide)tetrazolate. The coordination sphere in these complexes can be complemented by aromatic phosphine oxides to provide highly photoluminescent Eu(III) complexes. The highest quantum yield was 38% in 3 [Eu(PTO)₃·DPEPO](H₂O)₅ containing bis(2-(diphenylphosphino)phenyl) ether oxide (DPEPO) as compared to tris–europium complex with 5-(2-pyridyl-1-oxide)tetrazolate.