FRS-XRSA与SAXS研究硬弹性聚丙烯的结晶度、取向与超结构Ⅲ应变与回复

应用全倒易空间Ｘ 射线散射理论分析（ＦＲＳ ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化．结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＷＣ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε＞３０％后，则分离的片晶会发生断层滑移；ε可以诱发微孔，类似地当ε＞２０％，微孔尺寸亦趋不变．从凝聚态结构阐明了ＨＥＰＰ在ε Ｒ过程中不同阶段的结构变化     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

Some Aspects of Intra- and Inter-Molecular Reactions of Siliconium Ions in the Vapor Phase

Intramolecular rearrangement processes in the mass spectra of trimethylsilyl derivatives of hydroxy steroids are discussed in terms of the reaction of a siliconium center and a heteroatom. The reaction is shown to be stereospecific. The reactivity of siliconium cations also results in the occurrence of intermolecular reactions under electron impact ionization conditions. Tetramethylsilane is used as a precursor for the production of siliconium ions and examples of chemical ionization mass spectra employing this reagent are shown.     

Flow of a micropolar fluid due to a porous stretching sheet and heat transfer

The present work investigates the micropolar fluid flow due to a permeable stretching sheet and the resulting heat transfer. Unlike the existing numerical works on the flow phenomenon in the literature, the prime interest here is to analytically work out shape of the solutions and identify whether they are unique. Indeed, unique solutions are detected and presented in the exact formulas for the associated boundary layer equations. Temperature field influenced by the microrotation is also mathematically resolved in the cases of constant wall temperature, constant heat flux and Newtonian heating. To discover the salient physical features of many mechanisms acting on the considered problem, it is adequate to have the analytical velocity and temperature fields and also closed-form skin friction/couple stress/heat transfer coefficients, all as given in the current paper. For instance, the practically significant rate of heat transfer is represented by a single formula valid for all three temperature cases.     

Effect of Lorentz forces on forced-convection nanofluid flow over a stretched surface

Magnetic nanofluid hydrothermal analysis over a plate is studied that includes consideration of thermal radiation. The Runge–Kutta (RK4) method is utilized to get solution of ODEs which are obtained from similarity solution. In considering the impacts of Brownian motion, we applied Koo–Kleinstreuer–Li correlation to simulate the properties of CuO–water. The influence is discussed of important parameters such as the temperature index, magnetic, radiation, and velocity ratio parameters and volume fraction of nanoparticle on hydrothermal behavior. Results illustrate that the coefficient of skin friction enhances with enhancing magnetic parameter while reduces with enhancing velocity ratio parameter. Also the Nusselt number was found to directly depend on the velocity ratio and temperature index parameters but has an inverse dependence on the magnetic and radiation parameters.     

Thermophysical effects of carbon nanotubes on MHD flow over a stretching surface

This article is intended for investigating the effects of magnetohydrodynamics (MHD) and volume fraction of carbon nanotubes (CNTs) on the flow and heat transfer in two lateral directions over a stretching sheet. For this purpose, three types of base fluids specifically water, ethylene glycol and engine oil with single and multi-walled carbon nanotubes are used in the analysis. The convective boundary condition in the presence of CNTs is presented first time and not been explored so far. The transformed nonlinear differential equations are solved by the Runge–Kutta–Fehlberg method with a shooting technique. The dimensionless velocity and shear stress are obtained in both directions. The dimensionless heat transfer is determined on the surface. Three different models of thermal conductivity are comparable for both CNTs and it is found that the Xue [1] model gives the best approach to guess the superb thermal conductivity in comparison with the Maxwell [2] and Hamilton and Crosser [3] models. And finally, another finding suggests the engine oil provides the highest skin friction and heat transfer rates.     

Three-dimensional flow over a stretching surface in a viscoelastic fluid

This article looks at the hydrodynamic elastico-viscous fluid over a stretching surface. The equations governing the flow are reduced to ordinary differential equations, which are analytically solved by applying an efficient technique namely the homotopy analysis method (HAM). The solutions for the velocity components are computed. The numerical values of wall skin friction coefficients are also tabulated. The present HAM solution is compared with the known exact solution for the two-dimensional flow and an excellent agreement is found.     

Theoretical Studies on Structures and Properties of Endohedral Fullerenes Complexes： XHn@C32（X=F,O, N,C; n=l-4）

Theoretical studies on structures and properties of endohedral fullerene complexes formed by encapsulating small molecules of HF, H20, NH3, and CH4 in a C32 fullerene cage, were carried out by ab initio method. Current calculations reveal that these processes to encase them in fullerene are energetically unfavorable because of the small cavity size of C32. The red shift in the F-H stretching frequency indicates the potential existence of hydrogen bonding between the HF molecule and the carbon cage.     

Heat transfer in MHD viscoelastic fluid flow over a stretching sheet with variable thermal conductivity,non-uniform heat source and radiation

An analysis has been carried out to study the magnetohydrodynamic boundary layer flow and heat transfer characteristics of a non-Newtonian viscoelastic fluid over a flat sheet with a linear velocity in the presence of thermal radiation and non-uniform heat source. The thermal conductivity is assumed to vary as a linear function of temperature. The basic equations governing the flow and heat transfer are in the form of partial differential equations, the same have been reduced to a set of non-linear ordinary differential equations by applying suitable similarity transformation. The transformed equations are solved analytically by regular perturbation method. Numerical solution of the problem is also obtained by the efficient shooting method, which agrees well with the analytical solution. The effects of various physical parameters such as viscoelastic parameter, Chandrasekhar number, Prandtl number, variable thermal conductivity parameter, Eckert number, thermal radiation parameter and non-uniform heat source/sink parameters which determine the temperature profiles are shown in several plots and the heat transfer coefficient is tabulated for a range of values of said parameters. Some important findings reported in this work reveals that combined effect of variable thermal conductivity, radiation and non-uniform heat source have significant impact in controlling the rate of heat transfer in the boundary layer region.     

Improving the softness of BOPP films: From laboratory investigation to industrial processing

Young's modulus of biaxially oriented polypropylene (BOPP) films prepared with homemade film stretcher was investigated,which can be used to indicate the softness of fihns.It was found that the modulus of films was decreased by about 69％ as the content of polyethylene (PE) added into polypropylene (PP) reached 30％.Also,increasing draw temperature can induce lower stress level during stretching,which may lead to the formation of crystals with low orientation level and thus decreased modulus of films.Based on laboratory study,BOPP films produced on commercial line were studied by differential scanning calorimetry (DSC),wide and small-angle X-ray scattering (WAXS,SAXS) with varying contents of PE.SAXS results show that the crystals are oriented in both machine direction (MD) and transverse direction (TD),and the crystals are more oriented in TD than MD according to the WAXS results for all films.Also,the orientation parameter of crystal along TD increases from 0.68 to 0.83 as the contents of PE increase from 0％ to 25％.Meanwhile,the modulus of films in MD declines with increase of PE contents generally,improving the film softness.Orientation of crystals is thus an effective structure parameter to adjust the film softness.The relationship of processing-structure-property is also established.