一种新型织绵芋螺毒素可增强神经元钙电流

从中国南海织绵芋螺中分离出生物活性强、电生理效应特异的新的芋螺毒素。通过毒素分离纯化,并经生物活性测定,氨基酸测序,电生理效应等研究。分离到1种新的织绵芋螺毒素Tx7,它是由27个氨基酸组成。其序列为GCSSVCNSHTDCVTHCICTFRGCGAVN,并能引起小鼠痉挛,能增强海马神经元钙电流和提高兴奋性突触后电流的发放频率。实验表明Tx7具有较高的潜在应用价值。1实验部分1.1材料与仪器织绵芋螺,昆明种小鼠(20±2g),Bio-rad凝胶HPLC柱,BIFLEXⅢ型飞行时间质谱仪,491型蛋白质自动测序仪。     

聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。     

Interaction between indigo and adsorbed protein as a major factor causing backstaining during cellulase treatment of cotton fabrics

A model microassay system was developed to measure indigo backstaining on cotton fabrics in the presence of enzymes on a small laboratory scale. Backstaining indexes for 11 cellulase samples were measured, and the enzymes were ranked from lower to higher backstaining. Two multienzyme cellulase preparations were separated into fractions using chromatofocusing on a Mono P column. Adsorption ability and backstaining properties of purified enzyme fractions were studied. Evidence was obtained that protein adsorption on cotton fabrics is a crucial parameter causing backstaining (both for crude cellulase samples and purified enzyme components).     

Influence of 1-decanol on the surface tension and wetting power of a new anionic surfactant derived from sugar

We studied the adsorption behaviour at the liquid/air and liquid/solid interface of a new anionic surfactant derived from sugar, the sodium decyl galacturonate. The surface tension of aqueous solutions, measured in equilibrium and as a function of time, is particularly affected by the presence of decanol, synthesis residue, which amount ranges between about 0 and 13%. The surface tension lowering is accelerated in presence of decanol, owing to its rapid diffusion to the interface or/and because it affects the mobility and adsorption process of the anionic surfactant molecules. The wetting power of surfactant solutions were also investigated in relation with textile treatment applications. We measured the kinetics of absorption of surfactant solutions in a piece of standard cotton and compared it to the absorption of pure decanol, a completely wetting liquid and to the absorption of an alkylpolyglucoside. The time at which the fabric piece is saturated appears to be related to the adsorption of surface-active molecules on the fibers at the advancing liquid front/fabric contact line. Decanol was found to promote absorption and micellar life-time seem to reflect the differences observed at high concentration. This study shows the importance of controlling the amount of surface-active residues which may alter the kinetics of surfactant adsorption, particularly in industrial processes where equilibrium conditions are not reached.     

Electron beam irradiated textile cellulose fibres.: ESR studies and derivatisation with glycidyl methacrylate (GMA)

Powdered samples of cotton, flax and viscose from textile fibres were subjected to electron beam irradiation (20-400 KGy). ESR signals were observed after irradiation. The intensity of the signals depended on the administered dose and exhibited an exponential decay with time. The ESR spectra, whose pattern depended drastically on the crystallinity of the samples, indicated the simultaneous presence of at least three carbon-centred radical species. When the whole irradiated textile fibres were quenched in a solution of glycidyl methacrylate (GMA) a significant increase of the weight was observed, the increase being strongly dependent on the administered dose and on the time interval elapsed between irradiation and quenching. Spectroscopic characterisation evidenced that GMA acted as cellulose radicals scavenger on the unsubstituted carbon of the double bond and was covalently linked to the fibre through a new C-C bond while maintaining unaltered the ester and the epoxide groups, available for further derivatisations. Because irradiation of the whole textile fibres in the range 20-200 KGy does not result in significant degradation of the material, GMA quenching of fibres irradiated in this dose range may represent an attractive route to their functionalisation.     

Low-molecular-weight photoresponsive supramulecular hydrogel based on a dicationic azobenzene-bridged pyridinium hydrogelator

Photoresponsive supramolecular hydrogel was fabricated from a small azobenzene-bridged dicationic pyridinium salt in the aqueous solution. The UV-vis light triggered reversible gel-sol transformation of such low-molecular-weight supramolecular hydrogel was systematically investigated through various analytical techniques.     

Decentralized operation strategies for an integrated building energy system using a memetic algorithm

The emerging technology in net-zero building and smart grids drives research moving from centralized operation decisions on a single building to decentralized decisions on a group of buildings, termed a building cluster which shares energy resources locally and globally. However, current research has focused on developing an accurate simulation of single building energy usage which limits its application to building clusters as scenarios such as energy sharing and competition cannot be modeled and studied. We hypothesize that the study of energy usage for a group of buildings instead of one single building will result in a cost effective building system which in turn will be resilient to power disruption. To this end, this paper develops a decision model based on a building cluster simulator with each building modeled by energy consumption, storage and generation sub modules. Assuming each building is interested in minimizing its energy cost, a bi-level operation decision framework based on a memetic algorithm is proposed to study the tradeoff in energy usage among the group of buildings. Two additional metrics, measuring the comfort level and the degree of dependencies on the power grid are introduced for the analysis. The experimental result demonstrates that the proposed framework is capable of deriving the Pareto solutions for the building cluster in a decentralized manner. The Pareto solutions not only enable multiple dimensional tradeoff analysis, but also provide valuable insight for determining pricing mechanisms and power grid capacity.     

Nanocrystalline cellulose/fluorinated polyacrylate latex via RAFT‐mediated surfactant‐free emulsion polymerization and its application as waterborne textile finishing agent

A simple method for nanocrystalline cellulose (NCC)/fluorinated polyacrylate was developed by RAFT‐mediated surfactant‐free emulsion polymerization, in which the nanocomposites formed a core‐shell spherical morphology. The influence of the content of NCC‐g‐(PAA‐b‐PHFBA) (AA was acrylic acid, HFBA was hexafluorobutyl acrylate) on the properties of latex and film were systematically studied. The monomer conversion, the tensile strength, and water–oil repellency of film increased first and then decreased, the latex particle size decreased first and then decreased, when the content of NCC‐g‐(PAA‐b‐PHFBA) increased from 1 to 6 wt %. Elongation at break and thermal stability distinctly decreased when the content of NCC‐g‐(PAA‐b‐PHFBA) gradually increased. XPS showed that the fluorine‐containing groups well concentrated at the film–air interfaces during the annealing process. SEM analysis revealed that the treated fiber had a rugged surface, and the treated fabric had an excellent water repellency. In addition, this green grafting method in water offered a new perspective for the fabrication of exceptional NCC‐based nanocomposites with NCC as the core and also helped to promote the potential applicability of NCC in a range of multipurpose applications. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1305–1314     

Melt spinning of propylene carbonate‐plasticized poly(acrylonitrile)‐co‐poly(methyl acrylate)

The primary use of poly(acrylonitrile) (PAN) fibers, commonly referred to as acrylic fibers, is in textile applications like clothing, furniture, carpets, and awnings. All commercially available PAN fibers are processed by solution spinning; however, alternative, more cost‐effective processes like melt spinning are still highly desired. Here, the melt spinning of PAN‐co‐poly(methyl acrylate) (PMA) plasticized with propylene carbonate (PC) at 175°C is reported. The use of methyl acrylate (MA) as comonomer and PC as an external plasticizer renders the approach a combination of internal and external plasticization. Various mixtures of PAN and PC used in this work were examined by rheology, subjected to melt spinning, followed by discontinuous and continuous washing, respectively. The best fibers were derived from a PAN‐co‐PMA copolymer containing 8.1 mol‐% of MA having a number‐average molecular weight M _n of 34 000 g/mol, spun in the presence of 22.5 wt.‐% of PC. The resulting fibers were analyzed by scanning electron microscopy and wide‐angle X‐ray scattering (WAXS), and were subjected to mechanical testing.     

High sensitivity measurements of thermal properties of textile fabrics

A new testing apparatus is proposed to measure the thermal properties of fabrics made from polymeric materials. The calibration of the apparatus and the data acquisition procedure are considered in detail in order to measure thermal conductivity, resistance, absorption and diffusivity constants of the tested fabric samples. Differences between dry and wet fabrics have been carefully detected and analyzed. We have developed a new measurement protocol, the ThermoTex protocol, which agrees with the UNI EN 31092 standard and entails accurate quantification of the experimental errors according to a standard statistical analysis, thus allowing a rigorous investigation of the physical behavior of the phenomena involved. As a consequence, our equipment exhibits great potential for optimizing the thermal comfort of fabrics, according to the market demand, thanks to the possible development of a predictive phenomenological theory of the effects involved.