Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

Quantitative and high mass ToF-SIMS studies of siloxane segregation in hydrogel polymers using cryogenic sample handling techniques

This paper examines the capabilities of cryogenic sample handling to examine composition and structure of hydrogel materials where siloxane components are central to the analysis. XPS analysis of multicomponent polymers with cryogenic sample handling following exposure to aqueous environments has revealed the composition and kinetics of near surface reorganization for siloxane and fluorocarbon containing polymers. In this study we report results from a ToF-SIMS protocol for cryogenic sample handling applied to the analysis of surface changes upon hydration/dehydration of hydrogel polymers. Comparison of results from angle dependent XPS and ToF-SIMS are discussed for a range of commercial soft contact lens materials. Both methods detected changes in surface chemistry between the hydrated (frozen) and dehydrated surfaces. Analysis of the hydrated surfaces detected polymer components indicative of the commercial formulation as well as ice clusters. Analysis of the dehydrated materials detected changes in surface chemistry relative to the hydrated surface in addition to loss of water due to sample dehydration. A quantitative standard additions method for ToF-SIMS data was used to determine submonolayer amounts of PDMS impurities at the surface of the hydrogels. ToF-SIMS analysis of a series of seven poly (allyl methacrylate-g-dimethylsiloxane), AMA-g-DMS, graft copolymers in the hydrated state revealed high mass oligomeric ion distributions for systems with bulk PDMS content greater than 25 wt.%. This marks the first time that detection of high mass oligomeric ion distributions from hydrated (frozen) surfaces has been reported. Analysis of the dehydrated surface detected formation of high mass oligomeric ion distributions for systems with PDMS bulk content greater than 15 wt.%, but only detected these ion distributions in wet (frozen) samples when the bulk concentration was greater than 25 wt.%.     

光学非球面反射镜轻量化制造技术

新一代的空间相机一般通过采用轻质大尺寸的非球面光学元件来提高系统的成像质量，以降低系统复杂性。而空间相机中的结构件主要是用来支撑和定位主镜，如果主镜制作得更轻，则系统的其它结构将会设计得更加轻巧。受此趋势影响，大口径非球面镜的轻量化问题成为一个研究热点。     

Complex genetic evolution of artificial self‐replicators in cellular automata

It is widely believed that evolutionary dynamics of artificial self‐replicators realized in cellular automata (CA) are limited in diversity and adaptation. Contrary to this view, we show that complex genetic evolution may occur within simple CA. The evolving self‐replicating loops (“evoloops”) we investigate exhibit significant diversity in macro‐scale morphologies and mutational biases, undergoing nontrivial genetic adaptation by maximizing colony density and enhancing sustainability against other species. Nonmutable subsequences enable genetic operations that alter fitness differentials and promote long‐term evolutionary exploration. These results demonstrate a unique example of genetic evolution hierarchically emerging from local interactions between elements much smaller than individual replicators. © 2004 Wiley Periodicals, Inc. Complexity 10: 33–39, 2004     

Spectrophotometric determination of dopamine in microliter scale using microfluidic system based on polymeric technology

In this paper we report two simple and sensitive spectrophotometric procedures for the determination of dopamine in microfluidic system based on poly(dimethylsiloxane) (PDMS) technology and comparison of their interference-susceptibility. The analytical reactions and measurements were carried out at ambient temperature in a microreactor of total volume 6 μl coupled with a spectrophotometric flow-through cuvette.     

Structural and dynamic variations in DNA hexamers containing T-T and F-F single and tandem internal mispairs

Molecular dynamics simulations of double-helical DNA oligomers have been performed to investigate differences in the structure, dynamics, and hydration of F-F and T-T mispairs. Hexamers containing F-F pairs were found to be more dynamic, especially in the region of the mispair itself. This dynamic variability derives from greater flexibility of F-F pairs. The T-T mispairs, on the other hand, were found to be comparatively tightly bound as wobble pairs. The major and minor groove edges of the T-T pairs were observed to be solvated at exposed carbonyl positions by at least one water molecule, while F-F pairs lacked solvating waters. Stacking interactions were nearly identical for T-T and F-F pairs, leading to similar average structures, even though F stacking was more dynamically variable. Solvation differences between F-F and T-T therefore support the steric exclusion model for nucleotide incorporation in DNA replication. Large differences in the orientation of minor groove functional groups, in addition to differences in solvation, further rationalize why F bases present during DNA extension events induce stalls. Two novel nucleotides are proposed to further elucidate minor groove interactions of DNA with polymerase molecules.Electronic Supplementary Material This Material consists of equilibration protocol, plots of center-of-mass stacking, water radial distribution functions, helical parameter dynamics, and dynamics data for a control AT sequence. Supplementary material is available in the online version of this article at Contribution to the Jacopo Tomasi Honorary Issue     

Tuning single nucleotide discrimination in polymerase chain reactions (PCRs): synthesis of primer probes bearing polar 4'-C-modifications and their application in allele-specific PCR

There are many methods available for the detection of nucleotide variations in genetic material. Most of these methods are applied after amplification of the target genome sequence by the polymerase chain reaction (PCR). Many efforts are currently underway to develop techniques that can detect single nucleotide variations in genes either by means of, or without the need for, PCR. Allele-specific PCR (asPCR), which reports nucleotide variations based on either the presence or absence of a PCR-amplified DNA product, has the potential to combine target amplification and analysis in one single step. The principle of asPCR is based on the formation of matched or mismatched primer-target complexes by using allele-specific primer probes. PCR amplification by a DNA polymerase from matched 3'-primer termini proceeds, whereas a mismatch should obviate amplification. Given the recent advancements in real-time PCR, this technique should, in principle, allow single nucleotide variations to be detected online. However, this method is hampered by low selectivity, which necessitates tedious and costly manipulations. Recently, we reported that the selectivity of asPCR can be significantly increased through the employment of chemically modified primer probes. Here we report further significant advances in this area. We describe the synthesis of various primer probes that bear polar 4'-C-modified nucleotide residues at their 3' termini, and their evaluation in real-time asPCR. We found that primer probes bearing a 4'-C-methoxymethylene modification have superior properties in the discrimination of single nucleotide variations by PCR.     

The influence of hydroxyapatite modification on the cross-linking of polydimethylsiloxane/HAp composites

Hydroxyapatite (HAp) was modified by the action of various hydrophobic agents based on silicon-containing compounds. The influence of the type of applied agent on the thermodynamic and kinetic parameters of the cross-linking of poly(dimethyl siloxane)/HAp composites was investigated. All the modified HAp particles became hydrophobic and these samples were used to synthesize the polysiloxane/hydroxyapatite composites (PDMS/HAp). The possible modes of interaction between the hydroxyapatite and hydrophobing agents were discussed. The most probable interaction between hydroxyapatite and the applied hydrophobing agents is hydrogen bonding. PDMS/HAp composites were formed directly in the cell of the DSC and cross-linking was investigated in situ. It was determined that the introduction of hydroxyapatite into polysiloxane matrices changed the enthalpy of cross-linking, as well as the activation energy of cross-linking and reaction order, while the introduction of modified HAp led to thermodynamic and kinetic parameters more similar to those of the cross-linking of unfilled elastomer.     

软光刻技术制备液晶显示用定向层

以偶氮聚合物光致表面起伏光栅为模板,制备聚二甲基硅氧烷(PDMS)弹性印章,再以可溶性聚酰亚胺(PI)为“墨水”,在石英玻璃上压印出具有规则起伏结构的PI薄膜.由此制备的PI薄膜显示出很好的使液晶分子定向排列的效果.此方法成本低、效率高,是一种实用的液晶定向层薄膜制备方法.