Evanescent fluorobiosensor for the detection of polyaromatic hydrocarbon based on DNA intercalation

A flow-injection analysis (FIA) system coupled with an evanescent wave (EW) Biosensor employing total internal reflection of fluorescence radiation (TIRF) for the detection of polyaromatic hydrocarbon that intercalates into DNA is reported. A highly fluorescent intercalator, “ethidium bromide,” has been used as the reference compound for detection. The EW Biosensor was developed according to the procedure described earlier (1,2). Data on the analysis of Naphthalene, 3-methy cholanthrene, 7,12-dimethylbenz(a)anthracene, 1,2-benzanthracene, and some standard reference materials supplied by the National Institute of Standards and Technology are reported. The relative ability of the polyaromatic hydrocarbon to displace ethidium bromide, based on the relative binding ratio, is found to be on the order of 7,12-dimethylbenz[a]anthracene > 3-methylcholanthrene > 1,2-benzanthracene > napthalene.     

Quantification of volatile PAHs present at trace levels in air flow by aqueous trapping—SPE and HPLC analysis with fluorimetric detection

In the context of a European project, a new approach of sampling of volatile polycyclic aromatic hydrocarbons (PAHs) from air was developed. In fact, the aim of this project was to test the efficiency of an air cleansing prototype reactor, which was operating by non-thermal plasmolysis. With an eye to model the atmosphere ejected by the prototype, we needed to vaporise the volatile PAHs in an air stream at concentrations as low as those recommended by European Directives (96/62/CE) for PAHs in ambient air (i.e. 1 ng m⁻³). Our strategy was based on the analysis of PAHs trapped in an aqueous medium, in order to avoid important losses of volatile compounds observed during the delicate desorption-concentration step when classical solid supports are used. Then a study was carried out to determine: the design of the collecting part, the flow-rate of the air sampling, the nature and concentration of chemical additives used to enhance PAH solubility in water. The very highly diluted aqueous media obtained after the bubbling step were concentrated by solid-phase extraction (SPE) on hydrophobic cartridges and analysed on-line by reversed-phase HPLC with UV and fluorimetric detections. Lastly, the sampling technique was directly applied to the outlet of the air cleansing prototype and the analysis after 3-6 h of non-thermal plasmolysis showed that the target volatile PAHs were not present in an air stream initially polluted by volatile organic compounds.     

A novel nomenclature of polycyclic aromatic hydrocarbons without using graph centre

In this paper, we develop a novel adjacency matrix, He-matrix, corresponding to the dualist graph. Without using the graph center concept, we advance a novel nomenclature of polycyclic aromatic hydrocarbons. Further, we derive some distinguishing theorems about PAH molecules and present some results of our automatic derivatization and automatic classification counting of fused PAH molecules.     

The identification of nitrated polycyclic aromatic hydrocarbons in diesel particulate extracts and their potential formation as artifacts during particulate collection

Summary The highly complex matrix of diesel particulate extracts was analyzed for nitrated polycyclic aromatic hydrocarbons (nitro-PAH) using fused-silica capillary-column gas chromatography along with a thermionic nitrogen-phosphorus detector (TID) and high-performance liquid chromatography followed by on-line catalytic reduction of the nitro-PAH to amino-PAH and subsequent fluorescence detection. Positive isomer identification and quantitation of nitro-PAH are from retention times of authentic standards and their mass spectra. The ease of nitro-PAH formation by nitration of PAH raises the question regarding the origin of these species, whether they are produced as “native” products during the engine combustion process and/or in the exhaust, or instead, formed as the result of chemical conversion to produce artifacts during the sampling procedure. This problem is assessed examing 1-nitropyrene-concentration in particulates of three light-duty diesel engines for different sampling times. 1-Nitropyrene concentrations show only a moderate increase with sampling time under average sampling conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Identification and quantitative analysis of nitrogen-containing polycyclic aromatic hydrocarbons in sediments

An integrated analytical methodology has been developed for determining nitrogen-containing polycyclic aromatic hydrocarbons, which enables quantitation of individual contaminants as low as 1 μg/kg in sediment samples. A cross-sectional profile from the Hamilton Harbour sediment samples was analyzed for azaarenes. These contaminants were separated by Soxhlet extraction, and pH adjustment allowed their isolation from different classes of neutral and acidic components. Separation and identification of the organic bases in each sample were achieved by using open tubular column gas chromatography with thermionic detection and HRGC-mass spectrometry. Organic bases present in the samples included mostly azaarenes such as acridines, benzacridines, azafluorene, benzoquinolines, azapyrenes, etc. Quantitation and environmental significance of these compounds are discussed. Recoveries of individual azaarenes at two different levels were evaluated. Data presented indicate that detection limits of this method are between 1 and 10 μg/kg. Recovery azaarenes from bottom sediment samples at concentration levels between 1 to 100 μg/kg is 81 ± 17%.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.     

Detection of monohydroxylated polycyclic aromatic hydrocarbons in urine and particulate matter using LC separations coupled with integrated SPE and fluorescence detection or coupled with high‐resolution time‐of‐flight mass spectrometry

A high‐performance liquid chromatographic (HPLC) method with integrated solid‐phase extraction for the determination of 1‐hydroxypyrene and 1‐, 2‐, 3‐, 4‐ and 9‐hydroxyphenanthrene in urine was developed and validated. After enzymatic treatment and centrifugation of 500 μL urine, 100 μL of the sample was directly injected into the HPLC system. Integrated solid‐phase extraction was performed on a selective, copper phthalocyanine modified packing material. Subsequent chromatographic separation was achieved on a pentafluorophenyl core–shell column using a methanol gradient. For quantification, time‐programmed fluorescence detection was used. Matrix‐dependent recoveries were between 94.8 and 102.4%, repeatability and reproducibility ranged from 2.2 to 17.9% and detection limits lay between 2.6 and 13.6 ng/L urine. A set of 16 samples from normally exposed adults was analyzed using this HPLC‐fluorescence detection method. Results were comparable with those reported in other studies. The chromatographic separation of the method was transferred to an ultra‐high‐performance liquid chromatography pentafluorophenyl core–shell column and coupled to a high‐resolution time‐of‐flight mass spectrometer (HR‐TOF‐MS). The resulting method was used to demonstrate the applicability of LC‐HR‐TOF‐MS for simultaneous target and suspect screening of monohydroxylated polycyclic aromatic hydrocarbons in extracts of urine and particulate matter.     

In Situ Correlations Between Polycyclic Aromatic Hydrocarbons (PAH) and Pah Metabolizing System Activities in Mussels and Fish in the Mediterranean Sea: Preliminary Results

Abstract

Biochemical indices based on enzymatic activities have been determined in fish and mussels sampled in various different coastal locations in the Mediterranean Sea. Preliminary results show a good agreement between biochemical measurements in marine organisms and chemical analyses of polycyclic aromatic hydrocarbons present in sediments. The results obtained suggest the use of biochemical indices for application in chemical contaminant biomonitoring.     

Photooxidation of Selected Polycyclic Aromatic Hydrocarbons in Aqueous Organic Media in The Presence of Ti(IV)Oxide

Abstract

We have studied the photooxidation of selected polycyclic aromatic hydrocarbons (PAH) in the presence of Ti(IV)oxide in a mixed solvent system consisting of N-methylpyrrolidinone (NMP) and water. Reaction rates for the photooxidation of acenaphthylene and pyrene were investigated by monitoring the disappearance of the PAH substrate from the reaction mixture as a function of time. For both compounds plots of In C_o/C_t, as a function of time yielded straight lines, indicating first order kinetics with respect to the substrate. With an initial acenaphthylene concentration of 1.0 gL^?1 the first order reaction rate constant was 0.19 hr^?1 and the half life was 3.7 hr. With an initial pyrene concentration of 0.2 gL^?1 the first order reaction rate constant was 0.0285 hr^?1 and the half life was 24 hr. The photoproducts were characterized by high performance liquid chromatography with diode-array detection (HPLC/DAD) and by liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (APCI/LC-MS). Although a number of simple oxidation products were identified the bulk of the photoproducts consisted of the parent PAH substituted with one or more solvent (NMP) molecules. The product mixtures from the photooxidation of the non-mutagens acenaphthylene and pyrene were found to be also non-mutagenic in our Salmonella typhimurium forward mutation assay.