A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

Synthesis and characterization of molybdenum incorporated mesoporous aluminophosphate

A synthesis of molybdenum incorporated mesoporous aluminophosphate with long-chain n-alkylamine as template material had been prepared under non-aqueous condition. These materials were extensively characterized by using X-ray diffraction (XRD), nitrogen sorption isotherms, nuclear magnetic resonance of ²⁷Al and ³¹P (NMR), inductive coupled plasma (ICP), electron spin resonance (ESR), Fourier transform infrared (FTIR) and thermogravimetric-differential thermal analysis (TG-DTA). Morphology of the materials had been observed by using transmission electron microscope (TEM) that revealed the mesoporous materials possessed wormhole-like structures. Alkaline solvent extraction using n-butylamine/ethanol had been efficiently removed the n-alkylamine from the mesoporous samples which yielded BET surface areas around 550-730 m²/g. BJH analysis showed a narrow pore size distribution which increased with increasing of the carbon chain length of alkylamine (template). Valence state and coordination of the molybdenum in the obtained samples were investigated by using ESR and FTIR where it was found that Mo⁴⁺ and Mo⁶⁺ molybdenum species existed in the molybdenum incorporated mesoporous aluminophosphate in tetrahedral coordination.     

1H and 13C NMR spectroscopic study of oxidation of D,L‐cystine and 3,3′‐dithiobis(propionic acid) with hydrogen peroxide in aqueous solution

The oxidation of symmetrical disulfides [D ,L ‐cystine ( 1 ) and 3,3′‐dithiobis(propionic acid) ( 2 )] with hydrogen peroxide in D₂O–NaOH solution (pH 10–11) was studied by NMR spectroscopy. Assignments of the proton and carbon NMR signals of starting materials ( 1 and 2 ) and products of oxidation are based on conventional 1D NMR methods (DEPT, selective spin decoupling). Formation of C—S bond cleavage products or, in case of 2 , partially oxidized intermediates was not detected. The accelerating effect of Cu²⁺ cations, but not Fe³⁺ cations, on the oxidation rate of 1 in basic medium was demonstrated. Copyright © 2002 John Wiley & Sons, Ltd.     

Heat-treatment studies of molybdenum oxide-monohydrate

The dehydration of molybdic acid, MoO₃---H₂O, was studied by thermal analysis, X-ray diffractometry and FTIR spectroscopy. The results show that an intermediate phase, MoO₃-2/3H₂O is formed at 216 °C and the monoclinic form of MoO₃ is grown above 350 °C. The mechanism of dehydration and structural rearrangement were confirmed by the features of the infrared spectra showing formation of corner-shared MoO₆ octahedra.     

Kinetic Studies of Electrochemical Oxidation of 1,3-Benzenedithiol

The electrochemical oxidation of 1, 3-benzenedithiol was investigated in a 0. 100 mol/L tetrabutylammonium perchlorate/acetonitrile electrolyte. The electrochemical techniques used were potential sweep, bulk electrolysis, rotating disc and the potential step method. The combination of the techniques yielded the number of electrons transferred per molecule, the reaction order, the transfer coefficient, the diffusion coefficient and concentration of dithiol anions, the standard heterogeneous rate constant as well as the formal potential and equilibrium constant of the preceeding dissociation reaction. This paper also illustrates the methods for studying the electrode kinetics of reactions which (a) involve a chemical reaction preceeding the electron-transfer process, (b) have insoluble polymer products, and (c) are totally irreversible.     

Synthesis of cyclic mono- and bis-disulfides and their selective conversion to mono- and bis-thiosulfinates

Twelve-membered ring pseudopeptidic cyclic disulfides have been prepared by iodine oxidation of the parent dithiols. However, oxidation of N,N′-(1,2-phenylene)bis(2-mercapto-2-methylpropanamide) afforded a 25/75 mixture of cyclic mono- and bis-disulfides that were separated by selective precipitation in CHCl₃. The cyclic bis-disulfide was selectively prepared by iodine oxidation of the Ni complex of this dithiol and crystallized. Its crystal structure was solved by X-ray diffraction. All these cyclic mono- or bis-disulfides were selectively converted to cyclic mono- and bis-thiosulfinates upon stoichiometric oxidation with dimethyldioxirane at low temperature. ¹H NMR of the cyclic bis-thiosulfinate revealed the presence of four isomers, two couples of stereoisomers, as expected from the insertion of two oxygen atoms in this compound, one on each disulfide bond. The two couples of cis/trans isomers were separated by preparative TLC and identified after alkaline cleavage of the two S(O)-S bonds and metalation with Ni(II). As HO⁻ attack is selective for the sulfinyl sulfur, the nature of the Ni complexes obtained is a signature of each couple of stereoisomers.     

Novel radical‐responsive MRI contrast agent based on paramagnetic liposomes

A novel, radical responsive MRI contrast agent based on a gadolinium chelate conjugated to a liposome through a disulfide linker was synthesized, with the aim of pursuing the in vivo mapping of radicals. The liposome was prepared by incorporating a thiol‐activated phospholipid, which was subsequently reacted with a gadolinium chelate containing a free thiol group. The long reorientational motion of the supramolecular adduct endows the paramagnetic agent with a relaxivity significantly higher than that of the free complex. The disulfide bond represents a radical‐sensitive moiety and a large decrease in contrast efficacy (T₁ relaxivity) is shown upon its cleavage. A preliminary assessment of the system was made by means of in vitro gamma‐irradiation and thiol–disulfide bond exchange with dithiothreitol. Both methods showed a clear dose‐dependent decrease in T₁‐relaxivity. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthese und Eigenschaften von Sr3Mo1.5Zn0.5O7‐δ, einer Phase mit perowskitverwandter Schichtstruktur

Synthesis and Properties of the Layered Perovskite Phase Sr₃Mo_1.5Zn_0.5O_7‐δ The new layered perovskite phase Sr₃Mo_1.5Zn_0.5O_7‐δ was synthesized by solid state reaction using a Zn/ZnO oxygen buffer. The crystal structure was refined from X‐ray powder pattern by the Rietveld method. The compound crystallizes tetragonal in the space group I4/mmm (no. 139) with the lattice parameters a = 3.9631(3) Å, c = 20.583(1) Å. An oxygen deficiency corresponding to δ ≈ 0.25 was determinated, indicating the presence of molybdenum in mixed valence (Mo⁴⁺ and Mo⁶⁺).     

Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

Vapour and plasma ignition thresholds for visible pulsed-laser ablation of metallic targets

The coupling of visible nanosecond laser pulses to metallic targets irradiated in vacuum is studied. The expressions of the vapour and plasma ignition times are obtained. Two cases for vapour breakdown in the plasma ignition process are considered. The first case is that 40 generations of new electrons are born in vapour generation time before plasma formation as assumed in the literature. The second case is that 10 generations of new electrons are born in vapour generation time. Molybdenum (Mo), niobium (Nb) and aluminium (Al) targets are considered for illustrations of our results. The expression of the plasma ignition time for the Al target is substantially different from that reported in the literature. The vapour and plasma ignition threshold laser intensities are calculated and compared with those reported in the literature. Reasons for disagreement are discussed. The plasma ignition threshold estimated in the second case is noted to be in good agreement with the reported experimental result.