Biphenyl-tricarbonylchrom-komplexe, 9. Mitt.: Synthesen,chromatographische Enantiomerentrennung,Circulardichroismus und Chiralität von mono- und bis-(Tricarbonylchrom)-Komplexen di- und tetrasubstituierter sowie überbrückter Biphenyle

Chiral title compounds have been resolved by medium pressure liquid chromatography (MPLC) on triacetylcellulose in ethanol. Whereas a quantitative separation was achieved for16 and20, a recycling technique had to be applied to1,4,6,10 and15 leading to a 100% e.e. for1,6 and15 and to ca. 60% e.e. for4 and10.An unambiguous assignment of the chirality (+)-(R) _a -(S) _m for tricarbonylchromium-6,6-dimethyl-diphenicacid dimethylester (4) was deduced both from the photochemical decomplexation to (-)-5 with the known chirality (R) _a (whose e.e. was determined by MPLC on triacetylcellulose) and by comparison of the¹H-n.m.r. spectra of4 and5 thereby proving the structure 4 for the former.Other chiralities both for mono and bis(tricarbonylchromium)biphenyl complexes were established by chemical correlations and comparison of the CD spectra with those of key compounds.

Herrn Prof. Dr.H. Tuppy mit besten Wünschen zum 60. Geburtstag gewidmet.     

Copolymerization of ethylene and non-conjugated diene using homogenous catalyst

Ethylene and different amounts of 1,7-octadiene were copolymerized using the metallocene catalyst system ethylidene-bis(fluorenyl) zirconium dichloride and methylaluminoxane (MAO) at both 50 and 90 °C. The catalyst activity has slightly increased with the addition of low amounts of the diene in relation to the homopolymerization of ethylene. The obtained polymers were characterized according to their melting temperature (T_m) and crystallinity degree (x_c) by differential scanning calorimetry (DSC). Weight-average molecular weight (M_w) and polydispersity were determined by gel permeation chromatography (GPC). Diene contents in the copolymer were obtained through the FTIR spectroscopy. The results indicated that at polymerization temperature of 90 °C, crosslinking bonds in the obtained copolymers were low, differently from what was observed at 50 °C. The diene content in the copolymer achieved more than 3 mol% and the comonomer conversion was around 15%. Moreover, the obtained copolymers have M_w around 100,000 and large polydispersity.     

Tetramethyldisilan-1,2-diyl-verbrückte Dicyclopentadienyl-und Diindenylmetalldichloride der 4. Gruppe – Kristallstruktur von

Tetramethyldisilane-1,2-diyl bridged Dicyclopentadienyl and Diindenyl Metal Dichlorides of the Group 4 Metals – Crystal Structure of Dicyclopentadienyl and diindenyl metal dichlorides of the type Cp′? SiMe₂SiMe₂? Cp′MCl₂ (Cp′ = C₅H₄, M = Ti ( 1 ), Zr ( 2 ), Hf ( 3 ); Cp′ = C₉H₇, M = Zr ( 4 ), Hf ( 5 )) were synthesized and characterized by means of their ¹H, ¹³C, ²⁹Si-n.m.r., MS, and IR spectra. The crystal structure of 2 was determined.     

Metallocene-mediated synthesis of chain-end functionalized polypropylene and application in PP/clay nanocomposites

This paper summarizes our research in the preparation of chain end functionalized isotactic polypropylene (PP) having a terminal functional group, such as Cl, OH, and NH₂. The chemistry involves metallocene-mediated propylene polymerization using rac-Me₂Si[2-Me-4-Ph(Ind)]₂ZrCl₂/MAO complex in the presence of styrene derivatives (St-f) and hydrogen, which serve as the chain transfer agents. The molecular weight of the resulting PP polymers with a terminal Cl, OH and NH₂ group (i.e., PP-t-Cl, PP-t-OH and PP-t-NH₂) are inversely proportional to the molar ratio of [St-f]/[propylene]. Despite the extremely low concentration of functional group, the high molecular weight chain end functionalized PP-t-OH and exhibit a distinctive advantage over other functional PP polymers containing side chain functional groups or long functional blocks. The terminal hydrophilic OH and cations, with good mobility and reactivity, effectively hydrogen bond and ion-exchange the cations (Li⁺, Na⁺, etc.) located between the clay interlayers, respectively. Such interactions anchor the PP chain to the clay surfaces. On the other hand, the remaining rest of the unperturbed end-tethered high molecular weight PP tail exfoliates the clay layers. This exfoliated structure is maintained even after further mixing of the PP-bearing platelets with pure neat PP polymers.     

Influence of isotacticity and molecular weight on the properties of metallocenic isotactic polypropylene

The relationships between structure and properties have been established for isotactic polypropylene, iPP, homopolymers synthesized by metallocene catalyst systems. These iPPs exhibit different isotacticity degrees and molecular weights, and several thermal treatments during their processing have been applied. The most important factor affecting the structure and properties of these polymers is the isotacticity content. The thermal treatment, i.e., the rate of cooling from the melt, is also important and a clear molecular weight effect has been also found for the sample with lowest M_w. These factors affect the thermal properties, the degree of crystallinity and, therefore, the structural parameters and the viscoelastic behavior. A slow cooling from melt favors the formation of the γ phase instead of the α modification. The storage modulus, Young modulus and microhardness values increase as crystallinity does, independently of the origin of this increase: higher isotacticity or application of a slow crystallization from the melt.     

Ferromagnetism in Metallocene-Doped Fullerenes

 Ferromagnetism in fullerene-based systems doped with metallocenes is reviewed. These compounds form a ferromagnetic state by spin-coupling between π electrons on fullerene units, while the metallocene molecules do not contribute to the spin ordering. One of these compounds has the highest critical temperature (19 K) for this class of compound. The magnetic properties of these materials are very strongly dependent on the crystallization conditions. Corresponding author. E-mail: Dragan.Mihailovic@ijs.si Received September 4, 2002; accepted September 6, 2002     

Synthesis,characterization, and structural investigation of New η5-Cyclopentadienylbis-8-hydroxyquinolinatometal(IV) Complexes

By the interaction of M(η⁵-C₅H₄R)₂Cl₂ (M = Zr, Hf; R = H, Me, SiMe₃) and 8-hydroxyquinoline (oxH) or 5-chloro-8-hydroxyquinoline (ox′H) in dichloromethane solution at 20°C, the compounds M(η⁵-C₅H₄R)Clox₂ and M(η⁵-C₅H₄R)Clox₂′ were prepared respectively. A similar reaction of Ti(η⁵-C₅H₅)Cl₃ with ox′H in acetonitrile solution gave Ti(η⁵-C₅H₅)Clox₂′. All complexes were characterized by elemental microanalysis and by IR and ¹H NMR spectroscopy. X-ray analysis of M(η⁵-C₅H₅R)Clox₂′ (M = Ti, Hf) shows that these molecules may be described in terms of stereochemistry of eight-coordination approximating dodecahedral geometry more closely than octahedral geometry. With respect to octahedral coordination, the nitrogen atoms lie in a cis-configuration and the oxygen atoms in a trans-configuration. Dichloromethane molecules co-crystallize with the hafnium complex and occupy a position on the 2-fold axis. The structural results are compared with those in related compounds.     

Studies on the Synthesis of Ethylene Copolymers and Their Properties

The copolymerization of ethylene and 5-ethylidene-2-norbornene (ENB) catalyzed by metallocene catalysts system is reported in this paper. The catalysts include Et(Ind)₂ ZrCl₂/MAO and Cp₂ZrCl₂/MAO. The resulting copolymer contains an ethylidene group which can be readily converted to a hydroxyl group by hydrogen borane. Then the hydroxyl group in turn can be utilized for grafting with ?-caprolactone. The dependence of the graft weight percentage on the reaction time was also studied. The graft copolymer is a compatibilizer for various polyethylene blends with engineering plastics. A functional polyethylene can be easily synthesized by the copolymerization of ethylene and 9-decen-l-ol using a homogeneous catalytic system of El(Ind)₂ZrCl₂/MAO. The resulting functional polyethylene was characterized by NMR, DSC, IR and TGA; and can also be utilized for grafting with ?-caprolactone. The grafted copolymer is also an effective compatibilizer.     

H-, C-NMR and ethylene polymerization studies of zirconocene/MAO catalysts: effect of the ligand structure on the formation of active intermediates and polymerization kinetics

Using ¹H- and ¹³C-NMR spectroscopies, cationic intermediates formed by activation of L₂ZrCl₂ with methylaluminoxane (MAO) in toluene were monitored at Al/Zr ratios from 50 to 1000 (L₂ are various cyclopentadienyl (Cp), indenyl (Ind) and fluorenyl (Flu) ligands). The following catalysts were studied: (Cp-R)₂ZrCl₂ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu), rac-ethanediyl(Ind)₂ZrCl₂, rac-Me₂Si(Ind)₂ZrCl₂, rac-Me₂Si(1-Ind-2-Me)₂ZrCl₂, rac-ethanediyl(1-Ind-4,5,6,7-H₄)₂ZrCl₂, (Ind-2-Me)₂ZrCl₂, Me₂C(Cp)(Flu)ZrCl₂, Me₂C(Cp-3-Me)(Flu)ZrCl₂ and Me₂Si(Flu)₂ZrCl₂. Correlations between spectroscopic and ethene polymerization data for catalysts (Cp-R)₂ZrCl₂/MAO (R=H, Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, Me₅, n-Bu, t-Bu) and rac-Me₂Si(Ind)₂ZrCl₂ were established. The catalysts (Cp-R)₂ZrCl₂/AlMe₃/CPh₃⁺B(C₆F₅)₄⁻ (R=Me, 1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄, n-Bu, t-Bu) were also studied for comparison of spectroscopic and polymerization data with MAO-based systems. Complexes of type (Cp-R)₂ZrMe⁺←Me⁻-Al≡MAO (IV) with different [Me-MAO]⁻ counteranions have been identified in the (Cp-R)₂ZrCl₂/MAO (R=n-Bu, t-Bu) systems at low Al/Zr ratios (50-200). At Al/Zr ratios of 500-1000, the complex [L₂Zr(μ-Me)₂AlMe₂]⁺[Me-MAO]⁻ (III) dominates in all MAO-based reaction systems studied. Ethene polymerization activity strongly depends on the Al/Zr ratio (Al/Zr=200-1000) for the systems (Cp-R)₂ZrCl₂/MAO (R=H, Me, n-Bu, t-Bu), while it is virtually constant in the same range of Al/Zr ratios for the catalytic systems (Cp-R)₂ZrCl₂/MAO (R=1,2-Me₂, 1,2,3-Me₃, 1,2,4-Me₃, Me₄) and rac-Me₂Si(Ind)₂ZrCl₂/MAO. The data obtained are interpreted on assumption that complex III is the main precursor of the active centers of polymerization in MAO-based systems.