Structure and properties of the mesophase of syndiotactic polystyrene. VIII. Solvent sorption behavior of syndiotactic polystyrene/p‐chlorotoluene mesophase membranes

A crystalline δ form of a syndiotactic polystyrene (sPS) membrane was prepared from a solution of sPS (1 wt %) and p‐chlorotoluene (p‐CT) by a solution‐casting method. The mesophase (δ empty form) of sPS was obtained by the extraction of the guest solvent from the δ form of sPS by a stepwise solvent‐extraction method. The sPS/p‐CT mesophase membrane [p‐CT (A‐M)] was used for the sorption of 1 mol % p‐CT for different times and for the sorption of different concentrations of p‐CT, chlorobenzene (CB), p‐xylene (p‐X), toluene, and chloroform for 48 h. The presence of solvents in the sPS membrane was confirmed by IR analysis. A thermal study revealed that the sorption amount of 1 mol % p‐CT increased with increasing immersion time, and the sorption amounts of different solvents increased with increasing solvent concentration. Differential scanning calorimetry results showed that the desorption peak temperature increased as the amount of the solvent increased in the clathrated sPS membrane. Wide‐angle X‐ray diffraction results showed that 2θ at 8.25° was slightly shifted toward 8°, and there was no change in the peak position at 10° for p‐CT (A‐M), which was immersed in different solvents (1 mol %); however, the intensity of 2θ at 10° was not similar for all the samples. Among the solvents used for the sorption studies at 1 mol %, p‐CT (A‐M) could sorb more p‐CT and CB than p‐X, toluene, and chloroform. The solvent sorption isotherm was the Langmuir sorption mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3439–3446, 2004     

Characterization of some essential oils and their key components: Thermoanalytical techniques

The present study was aimed at determining the kinetics of evaporation and establishing vapor pressure curves for both single and multi-component systems by thermogravimetry (TG) and differential scanning calorimetry (DSC). Essential oils (e.g. lavender oil, orange oil, clove oil and eucalyptus oil, etc.) are typically multi-component systems consisting of various volatile pure components (e.g. linalyl acetate, limonene, cinnamaldehyde, etc.) which resemble single component systems. In this study linalyl acetate was taken as the calibration compound for TG. The vapor pressure curves for the pure substances were plotted using TG and vapor pressure plots for clove oil and eucalyptus oil were constructed using DSC. The thermodynamic and kinetic parameters of the pure compounds were compared to that of the multi-component systems to quantitatively and qualitatively measure the influence of different compounds on each other. The k-value from the vapor pressure data for linalyl acetate was calculated as 112006 Pa kg^0.5mol^0.5s^-1 m^-2 K^-0.5. The vapor pressure values were used to determine the Antoine constants using the SPSS 10.0 software.This revised version was published online in November 2005 with corrections to the Cover Date.     

On the validity of Langmuir adsorption on supported nanoparticles

The general form for adsorption on nanoparticles is presented. Conditions for the validity of Langmuir adsorption isotherm for supported nanoparticles are discussed.     

Deposition and characterization of Langmuir‐Blodgett films of cadmium arachidate/SWCNTs composites

The incorporation of single‐wall carbon nanotubes (SWCNTs) in cadmium arachidate film by means of the Langmuir‐Blodgett (LB) technique was investigated as a function of arachidic acid/SWCNT mass ratio at the air/water interface and in Langmuir‐Blodgett films. The behaviour at the air/water interface shows that SWCNTs act as an independent phase with respect to the cadmium arachidate. Deposition conditions are optimized when the weight ratio between the arachidic acid (AA) and SWCNTs is in the range 0.018:1 to 1:1. The general order of the LB multilayered structure was destroyed by the progressive density increase in SWCNT quantity as evidenced by X‐ray reflectivity (XRR) analysis. Scanning electron microscopy images indicated that when a multilayered structure was formed its layers consisted of SWCNT bundles stacked one over the other. Copyright © 2006 John Wiley & Sons, Ltd.     

Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives

The thermal behaviour of acetanilide (Ac) and two of its analogues, namely the para-ethoxyacetanilide (p-Eto Ac) and the para-bromoacetanilide (p-Br Ac), which are used as analgesics in the pharmaceutical industry was studied with a simultaneous TG/DSC unit. The examined analgesics showed two endothermic DSC peaks due to melting and vaporization. By combining the experimental TG data with the corresponding reference vapour pressure data obtained with the Antoine equation the plot of P versus v was derived. From the slope of this equation the constant k-value was determined for Ac. Then, using the same k-value the vapour pressures of p-Eto Ac and p-Br Ac were determined in the same temperature range. The vaporization enthalpies for all the studied compounds were obtained from different methods and a very good agreement was found. Vaporization follows a zero-order kinetics. The activation energy of vaporization (E_vap) was calculated from the dynamic TG experiments, using the Arrhenius equation.     

Evaluation of molecular structure in Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate by IR external reflection spectroscopy

 In situ polarized Fourier transform IR external reflection spectra of Langmuir monolayers of zinc stearate and zinc 12-hydroxystearate on a water surface were recorded for various surface areas, and their molecular structures were estimated. In the zinc stearate monolayer, the wavenumbers and the absorbances of the antisymmetric and symmetric methylene stretching bands did not change during monolayer compression, which means that orientational and conformational changes of the hydrocarbon chain did not occur. However, wavenumber changes of the antisymmetric and symmetric carboxylate stretching bands were observed during surface compression. The change in the binding nature of the zinc cation to the carboxylate group was speculated. Moreover, it was elucidated that the structure of the hydrocarbon chain in the zinc 12-hydroxystearate monolayer was different from that in the zinc stearate monolayer. Received: 21 March 2001 Accepted: 6 July 2001     

6-氨基青霉烷酸在弱碱性阴离子树脂IRA67上的吸附研究

用静态法研究了6-氨基青霉烷酸在弱碱性阴离子交换树脂IRA67上的吸附行为．在溶液pH为8．0，6-APA起始浓度介子3.00mg／m1-20．00mg／ml条件下，测定了25℃时IRA67树脂的静态交换动力学曲线、吸附等温线，并求得了IRA67树脂的平衡速率常数及吸附等温线方程．分别用Langmuir型和Frendlich型方程对IRA67树脂吸附等温线进行线性回归拟合，结果表明，6-APA在IRA67树脂上的吸附更符合Langmuir型吸附．     

Studies about the adsorption on lichen Evernia prunastri by enthalpimetric measurements

Lichens are bioaccumulators of divalent metal ions and the interaction between the lichens and five heavy metals was studied. In order to have a better understanding of the metal-uptake process by the lichens, data from atomic absorption spectroscopy were used to calculate the apparent coordination constants of the lichen–metal ion interactions by means of the Langmuir elaboration and microcalorimetric measurements to obtain enthalpimetric information. The results showed a correlation between the Langmuir constants and enthalpimetric measurements.     

Surface viscoelasticity of phospholipid monolayers at the air/water interface

The surface viscoelastic properties of monolayers of two phospholipids DPPC (L--dipalmitoylphosphatidylcholine) and DMPE (L--dimyristoylphosphatidyl-ethanolamin), at the air-water interface have been investigated. Two techniques were used for the investigation. One involved use of an interfacial shear rheometer (torsion pendulum apparatus ISR1), to provide measurements of the shear viscosity _s as a function of surface pressure, and the second, a modified LB trough with an oscillating barrier to generate periodie dilation and compression so as to measure the dilational elastic modulusE as a function of surface area.Results indicate a strong dependence of _s andE upon monolayer phases. This suggests that the viscoelastic relaxation of monolayers can be understood as molecular rearrangements, domain exchange and molecular reorientations between different monolayer states.     

Properties of monolayers of crown ethers bearing an azo and azoxy group in the macrocycle

Two methods are described for preparing monomolecular layers of crown ethers with an azo or azoxy group in the macrocycle. When the molecules used to build the monolayer are soluble in aqueous solutions, adsorptive preconcentration on mercury electrodes was used to prepare the monolayer coating. The monolayer was electroactive due to the presence of the azo or azoxy unit in the molecules. Monolayers of crown ethers bearing an azo group in the macrocycle were shown to recognize alkali metal cations present in the solution. Changes of the parameters of the voltammetric reduction peaks - peak potential and peak width, served as an indication of specific interactions of the monolayer of 13-membered and 16-membered azocrown ethers with Na⁺ and K⁺ cations, respectively.The monolayers capable of recognizing cations have also been prepared on the aqueous solution-air interface, using the Langmuir technique. In this approach, amphiphilic derivatives of the azocrowns were synthesized and the monolayer has been assembled on the subphase containing metal cations. Binding of the cation by the macrocycle has a stabilizing effect on the monolayer and higher collapse pressures are achieved than on the pure water subphase. The monolayer was transferred from the air-water interface on the solid substrate using the Langmuir-Blodgett technique. Thin mercury film electrodes on the Ag substrate, or An films evaporated on glass slides were employed as the electrode substrates. The former gave monolayer modified electrodes of higher stability.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.