Direct numerical simulation of settling of a large solid particle during bioconvection

Settling of a large solid particle in bioconvection flow caused by gyrotactic microorganisms is investigated. The particle is released from the top of the bioconvection chamber; its settling pattern depends on whether it is released in the centre of the bioconvection plume or at its periphery. The Chimera method is utilized; a subgrid is generated around a moving particle. The method suggested by Liu and Wang (Comput. Fluid 2004; 33 :223–255) is further developed to account for the presence of a moving boundary in the streamfunction‐vorticity formulation using the finite‐difference method. A number of cases for different release positions of the particle are computed. It is demonstrated that bioconvection can either accelerate or decelerate settling of the particle depending on the initial position of the particle relative to the plume centre. It is also shown that the particle impacts bioconvection plume by changing its shape and location in the chamber. Copyright © 2005 John Wiley & Sons, Ltd.     

Extending the scope of enantiomer separation by capillary supercritical fluid chromatography on immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex)

Immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex) with a cyclodextrin content of approximately 30 % by weight, previously employed as a versatile chiral stationary phase for the separation of enantiomers by GC, has been used for the separation of enantiomers by capillary supercritical fluid chromatography (SFC). A considerable number of racemates could be resolved, e.g. aromatic alcohols, amino alcohols (TFA derivatives), and underivatized acids. Many pharmaceutical compounds were among those analyzed, including several NSAIDs (e.g. ibuprofen and ketoprofen), a steroidal drug (nor-gestrel), a barbiturate (hexobarbital), and others. Among the racemates resolved were many which cannot be analyzed by GC owing to low volatility or decomposition at elevated temperatures. For two racemates, analysis temperature and mobile phase density were systematically varied to give constant analysis times or capacity factors k. Low temperatures (ca 60 °C) yielded the best separation in term of separation factor, α, or resolution, R_s, even though higher densities had to be used. In comparison with GC, capillary SFC was able to furnish higher separation factors and similar resolution. The applicability of capillary SFC for the analysis of mixtures of cyclodextrin derivatives, e.g. those used in the synthesis of Chirasil-Dex, was, furthermore, demonstrated.     

聚丙烯酸甲酯载体对柱状假丝酵母脂肪酶固定化的研究（Ⅰ）

合成了一系列不同结构的聚丙烯酸甲酯，考察了它们的固定化酵母脂肪酶催化酯水解反应的效果，得到了载体孔结构对固定化效果影响的一些规律．研究了最佳吸附条件，比较ｐＨ和离子强度对酵母脂肪酶自由酶和固定化酶催化酯水解反应活力的影响．     

Entrapped mixed microorganisms to treat organic wastewater from food industry

Limited land and insufficient technicians to operate a wastewater treatment system are main restrictions for many factories. Therefore, an ideal wastewater treatment method for a small or land-limited factory must possess merits such as high performance efficiency, high organic loading rate, little odor, simple operation, easy maintenance, and little land required (simultaneously). An entrapment technique to immobilize mixed microorganisms to treat organic wastewater, which was developed in the present work, possesses these characteristics. This project was done on a laboratory scale. The microorganisms were activated sludge (an undefined mixture of microorganisms obtained directly from a domestic wastewater treatment plan) and the mixed microorganisms were immobilized in cellulose triacetate by means of an entrapment technique to treat organic wastewater from food industry. After wastewater was treated by this system, the SCOD (soluble COD) removal efficiency of 81% evaluated samples exceeded 80% in 1.5 ± 0.9 g SCOD/L/d of the volumetric loading rate and 7–10 h for the hydraulic retention time. This wastewater treatment method can be applied to other organic industrial wastewater.     

Chemiluminescence sensor for isoniazid with controlled-reagent-release technology

A novel chemiluminescence (CL) sensor for isoniazid combined with flow-injection technology is presented in this paper. The analytical reagents, luminol and ferricyanide, were both immobilized on an anion-exchange column. The CL signal produced by the reaction between luminol and ferricyanide, which were eluted from the column through sodium phosphate injection, was decreased in the presence of isoniazid. The decreased CL intensity was linear with isoniazid concentration in the range 0.001–1.0 μg·ml⁻¹; and the detection limit was 0.35 ng·ml⁻¹ (3s). The whole process, including sampling and washing, could be completed in 2 min with a relative standard deviation of less than 4.1%. The sensor could be reused more than 400 times and has been applied for the determination of isoniazid in pharmaceutical preparations.     

PVA固定化脲酶电极的制作及电极特性的研究

利用PVA低温下的物理交联固定酶,制成酶电极并在不同尿素浓度、pH值、温度等条件下进一步研究这种酶电极的响应特性.     

聚丙烯酰胺固定化糖化酶特性的研究

本研究以丙烯酰胺单体通过反向悬浮聚合技术合成聚丙烯酰胺作为载体材料，采用包埋—交联法固定化葡萄糖淀粉酶，并对其特性进行了研究．结果表明，该固定化酶最适pH值为5．0，最适温度为55～58℃，而且具有较好的贮存稳定性和操作稳定性，8个月后该固定化酶的残余活力仍保持在94％左右，可重复使用43批次，此固定化酶酶活回收率达到56％．实验表明丙烯酰胺悬浮聚合固定化糖化酶的方法是简便可行的．     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)