Homo- and copolymerizaton of norbornene and norbornene derivative with Ni- and Pd-based β-ketoiminato complexes and MAO

Neutral nickel(II) and palladium(II) complexes bearing β-ketoiminato ligand have been synthesized. The two complexes have been investigated as catalyst for the polymerization. Using methylaluminoxane (MAO) as a cocatalyst, both complexes produce vinyl-addition polynorbornenes, but palladium(II) complex displays much higher activity up to 8.0 × 10⁷ g/(molPd h). Furthermore, both Ni(II) and Pd(II)/MAO system can efficiently copolymerize norbornene and 5-norbornene-2-yl acetate (NB-OCOMe) in moderate yields and in relatively high molecular weights. The analyses of the product by FTIR, ¹H NMR and ¹³C NMR spectra give the verification of vinyl addition copolymer. The copolymers show narrow molecular weight distribution and good solubility in common organic solvents.     

Isoconversional kinetic analysis of stoichiometric and off-stoichiometric epoxy-amine cures

The curing reaction of stoichiometric and off-stoichiometric diglycidyl ether of bisphenol A (DGEBA) and 1,3-phenylene diamine (m-PDA) mixtures was studied by differential scanning calorimetry, thermogravimetric analysis and rheological measurements. In order to highlight the side reactions such as etherification and homopolymerization, the neat DGEBA and DGEBA/DMBA (N,N-dimethylbenzylamine) mixture were examined. The classical model-fitting and the advanced isoconversional methods were used to determine the activation energy of the different reactions. The advanced isoconversional method leads to a good agreement between isothermal, nonisothermal and rheological results. The effective activation energies of primary amine epoxy reaction, etherification and homopolymerization were estimated to about 55-60, 104 and 170 kJ mol⁻¹, respectively.     

Homopolymerization of N-pyrimidinyl acrylamide

Homopolymerization of N-pyrimidinyl acrylamide(NPA)was reported for the first time.The polymer(polyNPA)was soluble only in acidic media and fluoroalcohols,and only in fluoroalcohol was homogeneous polymerization of NPA feasible.~1H NMR analysis proved that a 1:1 H-bonding complex could be formed between NPA andα,α-bis(trifluoromethyl)phenyl propan-2-ol (BTMP).Cumyl dithiobenzoate mediated reversible addition-fragmentation chain transfer(RAFT)polymerization of NPA in BTMP was carried out.~1H NMR analyses proved that the molecular weight increased linearly with the monomer conversion.The polymer prepared in conventional solvents was atactic while in protic media the syndiotacticity was slightly enhanced.     

Fe(acac)3-Al(i-Bu)3体系催化苯基环氧乙烷聚合

研究了Fe(acac)3-Al(i-Bu)3(acac=乙酰丙酮)催化体系催化苯基环氧乙烷(SO)的均聚反应,考察了溶剂、催化剂浓度、反应温度、反应时间对该聚合反应的影响及该反应的反应动力学.实验表明Fe(acac)3-Al(i-Bu)3催化体系催化苯基环氧乙烷(SO)均聚反应的最佳反应条件是反应时间11 h,反应温度80℃,催化剂浓度3.6×10-2mol/L,最佳溶剂为石油醚.动力学研究表明,苯基环氧乙烷的聚合速率与单体的浓度呈一级关系,且该聚合反应的活化能为25.6 kJ/mol.     

丙烯酰胺在离子液体中的原子转移自由基聚合

在1-丁基-3-甲基咪唑四氟硼酸盐离子液体中以氯化苄为引发剂,氯化亚铜/2,2’-联吡啶为催化剂成功实现了丙烯酰胺的原子转移自由基聚合(ATRP)。用IR对聚合物的结构进行了表征,证实聚合物链端具有-Cl端基。考察了引发剂用量、催化剂和配体用量、单体用量和反应时间等因素对丙烯酰胺在离子液体中的原子转移自由基聚合的影响,结果表明,反应时间为1.5 h时转化率达到31.43%,M_n^GPC=4451,M_w/M_n=1.38。且80 ℃下丙烯酰胺在离子液体中的最佳聚合工艺条件为：单体浓度3 mol/L,引发剂浓度0.010 mol/L,催化剂浓度0.015 mol/L,反应时间1 h。     

L-Lactide Homopolymerization and Copolymerization with ε-Caprolactone by Tetrahydrosalen Stabilized Yttrium Borohydride Complex

L-lactide（LLA） homopolymerization and copolymerization with ε-caprolactone（CL） in toluene initiated by tetrahydrosalen-supported yttrium borohydride complex were systematically investigated. A possible mechanism of LLA homopolymerization was proposed according to the 1H-NMR result. In addition, PCL-b-PLLA copolymers were synthesized by sequential addition of monomers and their structure was characterized by GPC, 1H-NMR and 13C-NMR.     

Fe—Al配位催化环氧丙烷均聚

用于环氧丙烷开环聚合的催化剂为有机金属化合物和稀土络合物等,在对于铁系催化剂催化丁二烯聚合、马来酸酐与苯乙烯共聚和邻苯二甲酸酐与环氧丙烷共聚的研究基础上,我们首次将这一类催化剂用于环氧化物的开环均聚上,发现Fe(acac)3-Al(i-Bu）3催化剂具有良好的催化活性,并进行了产物结构和反应动力学的研究,结构分析表明Fe(acac)3-Al(i-Bu）3催化剂体系具有良好的立体定向性。     

以聚乳酸为侧链的光学活性聚苯乙炔的合成与表征

通过4-溴苯甲醇和三甲基硅基乙炔的Sonagashira偶联反应与三甲基硅基的脱除反应,合成4-乙炔基苯甲醇.以4-乙炔基苯甲醇为引发剂,以有机氮杂环化合物DBU为催化剂,常温常压下进行丙交酯的活性开环聚合反应,采用1H-NMR和GPC对产物结构、分子量与分子量分布进行表征分析,结果表明,合成以了苯乙炔为端基的聚乳酸大...     

SYNTHESIS AND PROPERTIES OF HOMOPOLYMER AND COPOLYMERS OBTAINED FROM 1-OCTADECENE WITH ZIRCONOCENE CATALYSTS

Studies related to the behavior of different metallocene catalysts for the homopolymerization of 1-octadecene andits copolymerization with ethylene will be presented. The metallocenes: rac-Et(Ind)_2ZrCl_2, rac-Me_2Si(Ind)_2ZrCl_2 andPh_2C(Flu)(Cp)ZrCl_2 were chosen for the homopolymerization study. They show important differences in catalytic activity athigh temperatures (≥70℃), with rac-Et(Ind)_2ZrCl_2 showing the highest activity. At lower temperatures (≤30℃) thedifferences are negligible. For the copolymerization of ethylene with 1-octadecene only the catalysts rac-Et(Ind)_2ZrCl_2 andrac-Me_2Si(Ind)_2ZrCl_2 were studied. The results show that their catalytic activity is just like that for the homopolymerizationof 1-octadecene, with higher activity for the metallocene with the Et-bridged catalyst. ~(13)C-NMR analysis shows that thecomposition of the copolymerization products depends on the catalytic systems. Copolymers obtained with rac-Me_2Si(Ind)_2ZrCl_2 have greater comonomer incorporation. Thermal analysis shows that poly-1-octadecene synthesized withthe catalyst rac-Et(Ind)_2ZrCl_2 is very dependent on the polymerization temperature. The homopolymer obtained at 70℃presents two endothermal peaks at 41℃ and 53℃, as compared with the one obtained at 30℃ which presents one wider peakwith a maximum at 67℃. For the catalyst rac-Me_2Si(Ind)_2ZrCl_2 this trend is not observed. The type of metallocene and thereaction time do not significantly change the intrinsic viscosity, but the polymerization temperature changes it drastically,giving higher values at lower temperature. Viscosity measurements on the copolymers show that an increase of comonomerconcentration in the feed reduces the molecular weight of the copolymer, and it was also found that for homopolymer, themolecular weight is independent of the catalytic systems.