A [001]-Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide-Spectrum-Responsive Photocatalytic Hydrogen Evolution from Pure Water

Red phosphorus is a promising photocatalyst with wide visible-light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]-oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 μmol h⁻¹ from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]-oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron–hole separation and transfer, which benefited the photocatalytic HER performance.     

A Nanojunction Polymer Photoelectrode for Efficient Charge Transport and Separation

A metal‐free photoanode nanojunction architecture, composed of B‐doped carbon nitride nanolayer and bulk carbon nitride, was fabricated by a one‐step approach. This type of nanojunction (s‐BCN) overcomes a few intrinsic drawbacks of carbon nitride film (severe bulk charge recombination and slow charge transfer). The top layer of the nanojunction has a depth of ca. 100 nm and the bottom layer is ca. 900 nm. The nanojunction photoanode results into a 10‐fold higher photocurrent than bulk graphitic carbon nitride (G‐CN) photoanode, with a record photocurrent density of 103.2 μA cm⁻² at 1.23 V vs. RHE under one sun irradiation and an extremely high incident photon‐to‐current efficiency (IPCE) of ca. 10 % at 400 nm. Electrochemical impedance spectroscopy, Mott–Schottky plots, and intensity‐modulated photocurrent spectroscopy show that such enhancement is mainly due to the mitigated deep trap states, a more than 10 times faster charge transfer rate and nearly three times higher conductivity due to the nanojunction architecture.     

Synthesis of Layered Carbonitrides from Biotic Molecules for Photoredox Transformations

The construction of layered covalent carbon nitride polymers based on tri-s-triazine units has been achieved by using nucleobases (adenine, guanine, cytosine, thymine and uracil) and urea to establish a two-dimensional semiconducting structure that allows band-gap engineering applications. This biomolecule-derived binary carbon nitride polymer enables the generation of energized charge carrier with light-irradiation to induce photoredox reactions for stable hydrogen production and heterogeneous organosynthesis of C−O, C−C, C−N and N−N bonds, which may enrich discussion on chemical reactions in prebiotic conditions by taking account of the photoredox function of conjugated carbonitride semiconductors that have long been considered to be stable HCN-derived organic macromolecules in space.     

Graphitic Carbon Nitride (g-C3N4): An Interface Enabler for Solid-State Lithium Metal Batteries

Solid-state Li metal batteries (SSLMBs) have attracted considerable interests due to their promising energy density as well as high safety. However, the realization of a well-matched Li metal/solid-state electrolyte (SSE) interface remains challenging. Herein, we report g-C₃N₄ as a new interface enabler. We discover that introducing g-C₃N₄ into Li metal can not only convert the Li metal/garnet-type SSE interface from point contact to intimate contact but also greatly enhance the capability to suppress the dendritic Li formation because of the greatly enhanced viscosity, decreased surface tension of molten Li, and the in situ formation of Li₃N at the interface. Thus, the resulting Li-C₃N₄|SSE|Li-C₃N₄ symmetric cell gives a significantly low interfacial resistance of 11 Ω cm² and a high critical current density (CCD) of 1500 μA cm⁻². In contrast, the same symmetric cell configuration with pristine Li metal electrodes has a much larger interfacial resistance (428 Ω cm²) and a much lower CCD (50 μA cm⁻²).     

Polymeric Carbon Nitride/Reduced Graphene Oxide/Fe2O3: All‐Solid‐State Z‐Scheme System for Photocatalytic Overall Water Splitting

The charge transfer between hydrogen evolution photocatalysts (HEPs) and oxygen evolution photocatalysts (OEPs) is the rate‐determining step that controls the overall performance of a Z‐scheme water‐splitting system. Here, we carefully design reduced graphene oxide (RGO) nanosheets for use as solid‐state mediators to accelerate the charge carrier transfer between HEPs (e.g., polymeric carbon nitride (PCN)) and OEPs (e.g., Fe₂O₃), thus achieving efficient overall water splitting. The important role of RGO could also be further proven in other PCN‐based Z‐systems (BiVO₄/RGO/PCN and WO₃/RGO/PCN), illustrating the universality of this strategy.     

A General Synthesis of Porous Carbon Nitride Films with Tunable Surface Area and Photophysical Properties

Graphitic carbon nitride (g‐CN) has emerged as a promising material for energy‐related applications. However, exploitation of g‐CN in practical devices is still limited owing to difficulties in fabricating g‐CN films with adjustable properties and high surface area. A general and simple pathway is reported to grow highly porous and large‐scale g‐CN films with controllable chemical and photophysical properties on various substrates using the doctor blade technique. The growth of g‐CN films, ascribed to the formation of a supramolecular paste, comprises g‐CN monomers in ethylene glycol, which can be cast on different substrates. The g‐CN composition, porosity, and optical properties can be tuned by the design of the supramolecular paste, which upon calcination results in a continuous porous g‐CN network. The strength of the porous structure is demonstrated by high electrochemically active surface area, excellent dye adsorption and photoelectrochemical and photodegradation properties.     

Electron Deficient Monomers that Optimize Nucleation and Enhance the Photocatalytic Redox Activity of Carbon Nitrides

Polymeric carbon nitride (PCN) is usually synthesized from nitrogen‐rich monomers such as cyanamide, melamine, and urea, but is rather disordered in many cases. Now, a new allotrope of carbon nitride with internal heterostructures was obtained by co‐condensation of very electron poor monomers (for example, 5‐amino‐tetrazole and nucleobases) in the presence of mild molten salts (for example, NaCl/KCl) to mediate the polymerization kinetics and thus modulate the local structure, charge carrier properties, and most importantly the HOMO and LUMO levels. Results reveal that the as‐prepared NaK‐PHI‐A material shows excellent photo‐redox activities because of a nanometric hetero‐structure which enhances visible light absorption and promotes charge separation in the different domains.     

Robust Binding between Carbon Nitride Nanosheets and a Binuclear Ruthenium(II) Complex Enabling Durable,Selective CO2 Reduction under Visible Light in Aqueous Solution

Carbon nitride nanosheets (NS‐C₃N₄) were found to undergo robust binding with a binuclear ruthenium(II) complex ( RuRu′ ) even in basic aqueous solution. A hybrid material consisting of NS‐C₃N₄ (further modified with nanoparticulate Ag) and RuRu ′ promoted the photocatalytic reduction of CO₂ to formate in aqueous media, in conjunction with high selectivity (approximately 98 %) and a good turnover number (>2000 with respect to the loaded Ru complex). These represent the highest values yet reported for a powder‐based photocatalytic system during CO₂ reduction under visible light in an aqueous environment. We also assessed the desorption of RuRu ′ from the Ag/C₃N₄ surface, a factor that can contribute to a loss of activity. It was determined that desorption is not induced by salt additives, pH changes, or photoirradiation, which partly explains the high photocatalytic performance of this material.