Synthesis and Characterization of Novel Monoazo N‐Ester‐1,8‐Naphthalimide Disperse Dyestuffs

Five novel monoazo disperse dyestuffs based on N‐ester‐1,8‐naphthalimide were synthesized. Acenaphthene was nitrated, then oxidized to 4‐nitro‐1,8‐naphthalic anhydride. 4‐Nitro‐1,8‐naphthalic anhydride was reacted with methyl and ethyl glycinate in alcoholic media, followed with reduction. 4‐Amino‐N‐methyl and ethyl glycinate‐1,8‐naphthalimide were obtained. These products were diazotized and coupled with appropriate aromatic amines to give bluish‐red or violet dyestuffs. All intermediates and dyestuffs were purified and characterized by ¹H‐NMR, FTIR, DSC, UV‐VIS and Elemental Analysis. Dispersion of dyestuffs was prepared in water and applied to polyester fabrics. The dyed fabrics showed that four of the synthesized dyestuffs were suitable for coloring polyester fibers, producing deep bluish red with very good build up properties.     

Preparation and Characterization of Nanocrystalline Fe-Doped TiO2 Film on Different Substrates and Its Application in Degrading Dyeing Water

TiO₂ and Fe-doped TiO₂ thin films were prepared on the substrates (glass plates and glass microballs) after dipped in colloid and calcined at 500°C. The films have been characterized by UV-absorption, x-ray diffraction and atomic force microscopy (AFM). The investigated Fe-doped TiO₂ (A nominal 10 wt% Fe₂O₃ was impregnated) thin films were obtained by sol-gel method. The characterization results suggest that the calcined thin films primarily consist of TiO₂ anatase. And the light absorption curve of the TiO₂ films modified with Fe showed that red shift had happened by the dope of Fe. TiO₂/beads as photocatalyst were used to degrade the simulated dyeing water which contains reactive deep-blue dye (K-R). Through the degradation experiment, we found that the dope of Fe promoted the photocatalytic activities. The results showed that the dyeing water can be decomposed more effectively by the photocatalytic oxidation of Fe/TiO₂ film on glass micro-balls than glass plates.     

Silicone nanomicelle dyeing method on polyester fibre: Comparative evaluation of chemical properties,fastness properties,and DFT

Disperse Red 177(9a), Disperse Red 343(9b), Disperse Blue 165(9c), Disperse Blue 165.1(9d), Disperse Blue 366(9e), and Disperse Blue 148(9f) were examined in the solvent. During silicon nanomicelle dyeing, we employed 9(a–f) azo disperse dyes on polyester. On polyester fabric, dye 9(a–f) offers equal washing, light, and rubbing fastness in both the conventional and silicone nanomicelle techniques. The dye can now be transported directly into the fibre core without the use of auxiliary dyes owing to the reduction in the particle size of azo dyes, which is made possible by nanoemulsions superior dispersion. The levelling property of the dispersed dye is enhanced by the dyeing process. When both techniques are applied, the lightfastness properties of all dyes are improved. It provides a very good to outstanding protection factor for textile materials. These 9(a–f) azo disperse dyes have moderate to outstanding photostability, net electrophilicity index, and lightfastness.     

Ultrasound assisted enhancement in natural dye extraction from beetroot for industrial applications and natural dyeing of leather

There is a growing demand for eco-friendly/non-toxic colorants, specifically for health sensitive applications such as coloration of food and dyeing of child textile/leather garments. Recently, dyes derived from natural sources for these applications have emerged as an important alternative to potentially harmful synthetic dyes and pose need for suitable effective extraction methodologies. The present paper focus on the influence of process parameters for ultrasound assisted leaching of coloring matter from plant materials. In the present work, extraction of natural dye from beetroot using ultrasound has been studied and compared with static/magnetic stirring as a control process at 45 °C. The influence of process parameters on the extraction efficiency such as ultrasonic output power, time, pulse mode, effect of solvent system and amount of beetroot has been studied. The use of ultrasound is found to have significant improvement in the extraction efficiency of colorant obtained from beetroot. Based on the experiments it has been found that a mixture of 1:1 ethanol–water with 80 W ultrasonic power for 3 h contact time provided better yield and extraction efficiency. Pulse mode operation may be useful in reducing electrical energy consumption in the extraction process. The effect of the amount of beetroot used in relation to extraction efficiency has also been studied. Two-stage extraction has been studied and found to be beneficial for improving the yield for higher amounts of beetroot. Significant 8% enhancement in % yield of colorant has been achieved with ultrasound, 80 W as compared to MS process both using 1:1 ethanol–water. The coloring ability of extracted beet dye has been tested on substrates such as leather and paper and found to be suitable for dyeing. Ultrasound is also found to be beneficial in natural dyeing of leather with improved rate of exhaustion. Both the dyed substrates have better color values for ultrasonic beet extract as inferred from reflectance measurement. Therefore, the present study clearly offers efficient extraction methodology from natural dye resources such as beetroot with ultrasound even dispensing with external heating. Thereby, also making eco-friendly non-toxic dyeing of fibrous substances a potential viable option.     

印染废水的电化学深度处理及回用研究

针对印染废水水质特性,在PbO₂/Ti阳极、不锈钢板阴极的电解反应器中研究了电化学氧化对印染废水生化出水的处理效果. 试验结果表明,电氧化工艺可以实现化学需氧量（Chemical Oxygen Demand,COD）、氨氮和色度的同步去除. 在电流密度10 mA·cm^-2时电解60 min,废水中COD、氨氮、色度、氯离子浓度以及pH值等指标均可达到GB/T 19923-2005《城市污水再生利用工业用水水质》中工艺与产品用水标准,电流效率达45.6%,吨水能耗4.1 kW·h.     

Effect of sonochemical scouring on the surface morphologies,mechanical properties,and dyeing abilities of wool fibres

Ultrasonics has the potential to reduce the cost and environmental impact of textile processing. This work investigates the effects of ultrasonic irradiation during wool scouring on fibre surface morphologies, fibre mechanical properties, and fibre dyeing abilities. A range of ultrasonic frequencies were used in the scouring bath to examine the forms of fibre cuticle damage. It is observed that wool fibres underwent ultrasonic irradiation at a low frequency have severe modifications of the fibre surface structure. Despite some visible disruptions to the fibre scale structure however, ultrasonic irradiation has shown a negligible impact on the fibre mechanical properties, especially bending abrasion resistance which depends largely on the fibre surface conditions, and is responsible for the handle and pilling propensity of the resultant fabrics. Dyeing abilities were investigated on wool samples using commercially available acid dye and reactive dye. It is found that ultrasonically scoured wool has a quicker dye uptake in the early stage of low temperature dyeing for both acid dye and reactive dye, than the conventionally scoured wool.     

Ultrasound-assisted dyeing of cellulose acetate

The possibility of reducing the use of auxiliaries in conventional cellulose acetate dyeing with Disperse Red 50 using ultrasound technique was studied as an alternative to the standard procedure. Dyeing of cellulose acetate yarn was carried out by using either mechanical agitation alone, with and without auxiliaries, or coupling mechanical and ultrasound agitation in the bath where the temperature range was maintained between 60 and 80 °C.The best results of dyeing kinetics were obtained with ultrasound coupled with mechanical agitation without auxiliaries (90% of bath exhaustion value at 80 °C). Hence the corresponding half dyeing times, absorption rate constants according to Cegarra–Puente modified equation and ultrasound efficiency were calculated confirming the synergic effect of sonication on the dyeing kinetics. Moreover the apparent activation energies were also evaluated and the positive effect of ultrasound added to mechanical agitation was evidenced by the lower value (48 kJ/mol) in comparison with 112 and 169 kJ/mol for mechanical stirring alone with auxiliaries and without, respectively.Finally, the fastness tests gave good values for samples dyed with ultrasound technique even without auxiliaries. Moreover color measurements on dyed yarns showed that the color yield obtained by ultrasound-assisted dyeing at 80 °C of cellulose acetate without using additional chemicals into the dye bath reached the same value yielded by mechanical agitation, but with remarkably shorter time.     

Disperse dyes based on 2-aminothiazole derivatives for cellulose triacetate fabric

A range of azo disperse dyes was prepared by coupling diazotized 2-amino-4-(p-nitrophenyl)-5-nitrothiazole with various substituted arylamines. Spectral properties in the infrared and visible range of the dyes obtained were investigated. All the dyes, when applied on cellulose triacetate fabric as 2% shade, showed fairly good to very good light fastness and very good to excellent fastness to washing, perspiration, rubbing and sublimation. All the dyes gave a wide range of reddish brown to indigo shades with very good depth and levelness on fabric. The purity of dyes was checked by thin layer chromatography. The percentage dyebath exhaustion and fixation on fabric was reasonably good and acceptable.     

电化学在纤维织物染色中的应用

对蛋白质纤维－丝绸的电化学染色方法进行了初步探索，文中讨论了影响电化学染色上染率的诸因素，并给出上染率α随槽压Ｖ变化的经验方程，实验表明，电化学染色方法较常规色方法能明显地提高上染率，降低能耗，并减少环境污染。