Amperometry of Heparin Polyion Using a Rotating Disk Electrode Coated with a Plasticized PVC Membrane

Electrochemical method of detection of heparin polyion was developed based on voltammetry of heparin on a rotating glassy carbon (GC) electrode coated with a plasticized PVC membrane. The membrane was deposited on the GC disk by spin‐coating technique using a mixture of solutions of PVC in tetrahydrofuran, and 1,1′‐dimethylferrocene (DMFc) and hexadecyltrimethylammonium tetrakis(4‐chlorophenyl)borate (HTMATPBCl) in o‐nitrophenyl octyl ether. UV/vis reflection spectrometry was used to evaluate the membrane thickness, which exhibits a linear correlation with the membrane resistance measured by impedance spectroscopy. It is shown that this electrode can be used for amperometric or coulometric detection of heparin in aqueous samples of medically relevant concentrations (1–10 U mL^?1), with a detection limit of 1.4 U mL^?1. Evidence is provided indicating that the current determining step is the reversible adsorption of the ion‐pair of heparin polyion with HTMA⁺ cation at the membrane/aqueous electrolyte interface, which is driven by oxidation of DMFc at the GC/membrane interface.     

Coulometric argentometric determination of microamounts of sulphur in iron and steel after reduction to hydrogen sulphide with iron(II) in strong phosphoric acid medium

A coulometric method was developed for the determination of microamounts of sulphur in iron and steel. Hydrogen sulphide is quantitatively evolved by reduction with iron(II) in strong phosphoric acid medium and is titrated with electrolytically generated silver ion from a silver anode. Microamounts of sulphide (2.96–224.3 μg) in sodium sulphide standard solutions could be determined with an error of only a few percent. Sulphur in a potassium sulphate standard solution is quantitatively reduced to hydrogen sulphide and could be separated from the solution by heating and determined accurately. Trace amounts of sulphur (7–100 μg g^?1) in iron and steels could be determined with a standard deviation of 0.7–2.1 μg g^?1.     

Electrochemical behavior of some triazine derivatives at glassy carbon electrode in non-aqueous media

Electroreduction of 4-amino-6-methyl-3-thio-1,2,4-triazine-5-one (I), 6-methyl-3-thio-1,2,4-triazine-5-one (II), and 2,4-dimethoxy-6-methyl-1,3,5-triazine (III) in dimethylformamide was investigated. Electrochemical techniques including differential pulse voltammetry (DPV), cyclic voltammetry (CV), chronoamperometry, and coulometry were employed to study the mechanism of the electrode process. From the analysis of the voltammetric and spectroscopic experiments a mechanism was proposed for the electroreduction of thio-triazine and triazine compounds. Compounds I and II having thiol groups exhibited similar redox behavior. Both compounds displayed two cathodic peaks, whereas the third compound (III), with no thiol group, showed only one cathodic peak in the same potential range as the second peak of compounds I and II.The results of this study show that in the former wave, the one electron reduction of thiol led to a dimer (disulfide) species and in the latter, the triazine ring was reduced in a two-electron process. The effects of various physical and electrochemical parameters were studied and the electrochemical behavior of the monomers was reported as a function of these parameters. A completely irreversible behavior was observed from cyclic voltammograms obtained under different conditions. Furthermore, in this study some numerical constants, such as diffusion constant, transfer coefficient, and rate constant of coupled chemical reaction were determined.     

Characteristic of the Ag(II)/Ag(I) system in the presence of 2,2′:6′,2″-terpyridine in acetonitrile

Summary Composition of complexes of Ag(II) and Ag(I) ions with 2,2:6,2-terpyridine (tp) have been established. It has been found that the Ag⁺ ion forms only one complex Ag(tp)⁺ withtp in acetonitrile; its conditional formation constant: ₀₁=6.6·10⁴ has been determined by the potentiometric method. Equilibria and redox systems formed in solutions due to the complexation of Ag⁺ and Ag²⁺ and oxidation of Ag(II) complexes are described. Their formal potentials have been found by coulometric and voltamperometric examinations. The presence of the Ag(tp) ₂ ³⁺ ion in the anodic oxidized solutions of the complexes Ag(tp)(NO₃)₂ and Ag(tp)₂(NO₃)₂ has been proved. Properties of the system Ag(II)/Ag(I) in the presence of terpyridine in water and in acetonitrile have been compared.

---

Charakteristik der Systeme Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Acetonitril

Zusammenfassung Die Zusammensetzung der Komplexe von Ag(I)- und Ag(II)-Ionen mit 2,2:6,2-Terpyridin (tp) wurde bestimmt. Das Ag⁺-Ion bildet mittp in Acetonitril nur einen Komplex-Ag(tp)⁺. Seine Konditionalbildungskonstante ₀₁=6.6·10⁴ wurde mit Hilfe der potentiometrischen Methode bestimmt. Es wurden die Gleichgewichte und Redoxsysteme als Resultat der Komplexbildung von Ag(II)- und Ag(I)-Ionen und der Ag(II)-Komplexoxidation charakterisiert und die Formalpotentiale mittels Voltametrie und Coulometrie bestimmt. Die Gegenwart der Ag(tp) ₂ ³⁺ -Ionen wurde in anodisch oxydierten Lösungen der Komplexe Ag(tp)(NO₃)₂ und Ag(tp)₂(NO₃)₂ nachgewiesen. Die Eigenschaften des Systems Ag(II)/Ag(I) in Gegenwart von 2,2:6,2-Terpyridin in Wasser und in Acetonitril wurden verglichen.

     

A new approach to flow-batch titration. A monosegmented flow titrator with coulometric reagent generation and potentiometric or biamperometric detection

Monosegmented flow analysis (MSFA) has been used as a flow-batch system to produce a simple, robust, and mechanized titrator that enables true titrations to be performed without the use of standards. This paper also introduces the use of coulometry with monosegmented titration by proposing a versatile flow cell. Coulometric generation of the titrand is attractive for titrations performed in monosegmented systems, because the reagent can be added without increasing the volume of sample injected. Also, biamperomeric and potentiometric detection of titration end-points can increase the versatility of the monosegmented titrator. The cell integrates coulometric generation of the titrand with detection of end-point by potentiometry or biamperometry. The resulting titrator is a flow-batch system in which the liquid monosegment, constrained by the interfaces of the gaseous carrier stream, plays the role of a sample of known volume to be titrated. The system has been used for determination of ascorbic acid, by coulometric generation of I₂ with biamperometric detection, and for determination of Fe(II), by coulometric generation of Ce(IV) with potentiometric detection of the end-point, both in feed supplements.     

Coulometric determination of total sulfur and reduced inorganic sulfur fractions in environmental samples

Evaluation of the solid-phase partitioning of sulfur is frequently an important analytical component of risk assessments at hazardous waste sites because minerals containing reduced-sulfur can significantly affect the transport and fate of organic and inorganic contaminants in natural environments. We applied selected methods for the determination of total sulfur, acid-volatile sulfide (AVS), chromium-reducible sulfur (CRS), and extractable-sulfate in standard reference materials and sediment samples from a contaminated site. A coulometric titration method is presented and evaluated for total sulfur, AVS, and CRS. This method is especially advantageous for AVS and CRS determinations because hydrogen sulfide gas evolved during chemical extraction is detected and quantitated in-line; consequently, measurement endpoints can be precisely determined without need for setting arbitrary time limits. The coulometric method allows for improved data quality and increased laboratory throughput of samples. Data on sulfur partitioning are presented for four standard reference materials (NIST 1646a, NIST 2780, CCRMP LKSD-1, CCRMP RTS-3) for the purpose of supporting quality control in environmental studies involving the geochemical and biochemical cycling of sulfur.     

Voltammetric determination of As(III) in an aqueous zwitterionic complexing medium

Summary The polarographic behaviour and determination of As(III) in aqueous complexing electrolytes (bicine buffer solutions) ofpH values varying from 1.13–11.96 have been investigated at 25°C (direct current and differential pulse polarographic techniques). Using DC polarographic measurements, it was shown that reduction of As(III) takes place along one or three waves depending upon thepH value of the solution. Microcoulometric experiments have been performed at the limiting region of the different waves obtained at differentpH values. Cyclic voltammograms were recorded using a HDME to investigate the nature of reduction. Schemes for the mechanism of reduction occurring at the DME have been deduced. Kinetic parameters and wave characteristics for the reduction of As(III) have been calculated. A method for DPP determination of As(III) in bicine buffer solution ofpH 1.41 is reported. The detection limit of the method is 6.60×10^–8 M As(III).

---

Voltammetrische Bestimmung von As(III) in einem wäßrigen zwitterionischen komplexierenden Medium

Zusammenfassung Das polarographische Verhalten und die polarographische Bestimmung von As(III) in wäßrigen komplexierenden Elektrolyten (Bicin-Pufferlösungen) wurde beipH-Werten zwischen 1.13 und 11.96 und 25°C untersucht (Direktstrom- und Differentialpulstechniken). Mittels DC-Polarographie wurde gezeigt, daß die Reduktion von As(III) je nach dempH-Wert der Lösung in einer oder in drei Wellen erfolgt. In den Grenzbereichen der bei verschiedenenpH-Werten erhaltenen unterschiedlichen Wellen wurden microcoulometrische Experimente durchgeführt. Zur Untersuchung des Reduktionsvorgangs wurden cyclische Voltammogramme unter Verwendung einer HDME durchgeführt. Für den Mechanismus der an der Quecksilbertropfelektrode stattfindenden Reduktion wurden Reaktionsgleichungen ermittelt. Kinetische Parameter und Wellencharakteristika für die Reduktion von As(III) wurden berechnet. Eine Methode zur Bestimmung von As(III) mittels differentieller Pulspolarographie in Bicin-Pufferlòsung beipH 1.14 wird vorgestellt. Die Erfassungsgrenze der Methode liegt bei 6.60×10^–8 M As(III).

     

Determination of the purity of acidimetric standards by constant-current coulometry, and the intercomparison between CRMs

The accuracy and uncertainty of the coulometric measurement results of reference materials for acidimetric titration were examined in this study. The results for amidosulfuric acid and potassium hydrogen phthalate are presented. The uncertainty was investigated by examining the dependency on the sample size and on the electrolysis current. Changes in the titration parameters did not result in any significant effects on the titration results. Acidimetric standards with the certified value linked to the SI were developed. In addition, the intercomparison of acidimetric standards was carried out by gravimetric titration, and the relationship between our coulometric results was determined. Furthermore, due to recent internationalization, not only the traceability to the SI but also the relationship and consistency of their analytical data have gained increasing importance. Our results were validated using certified reference materials (CRMs) obtained from different National Metrology Institutes (NMIs), and their relationships are presented. Presented at -- “BERM-10” -- April 2006, Charleston, SC, USA.     

用于检测暂态pH值变化的电量型铂电极

本文报道用铂制作的电量型pH传感器，其原理是铂电极表面上氧化物在形成单分子氧化物覆盖前的覆盖度与溶液pH值之间存在一定的关系，pH值的改变会导致铂表面氧化物覆盖度的改变，并以一定的电量变化为表现形式。在碱性溶液中，该传感器对pH值变化的响应呈线性变化规律，且响应时间小于100ms，精度小于0.2个pH值。该pH传感器可检测反应过程中pH值的暂态变化，适用于研究电极反应或有中间体生成的反应的机理。该传感器的有效性在用扫描电化学显微镜（SECM）探针-基底伏安模式研究氢氧化镍的充放电的过程中得到验证。     

Isotope effects in α-PdH(D) as an instrument for diagnosing bulk defects

Protium and deuterium sorption in the α-phase region is studied for highly defective palladium electrodeposits fabricated under controllable potentiostatic modes, particularly in the region of concentrated hydride formation. An anomalously high hydrogen content is observed for these samples in both α- and β-hydrides. On the basis of coulometry in the course of anodic hydrogen extraction, the non-linear sorption isotherms are plotted and their specific features are considered under an assumption of simultaneous equilibrium sorption of hydrogen by several types of lattice positions with a certain degree of defectiveness. Less defective palladium samples deposited in the absence of bulk hydridization are studied for comparison. The approach is proposed to estimate the fraction of defective regions. The procedure of analyzing the low-pressure limit is used for the first time for determining the specific values of the isotope effect, and also H and D Sievert's constants. The isotope effect is demonstrated to be extremely sensitive to the type of defectiveness. Electronic Publication