Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

Structural Patterns and Dimensionality in Magnesium Borophosphates: The Crystal Structures of Mg2(H2O)[BP3O9(OH)4] and Mg(H2O)2[B2P2O8(OH)2]·H2O

Hydrothermal investigations in the system MgO/B₂O₃/P₂O₅(/H₂O) yielded two new magnesium borophosphates, Mg₂(H₂O)[BP₃O₉(OH)₄] and Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O. The crystal structures were solved by means of single crystal X‐ray diffraction. While the acentric crystal structure of Mg₂(H₂O)[BP₃O₉(OH)₄] (orthorhombic, P2₁2₁2₁ (No. 19), a = 709.44(5) pm, b = 859.70(4) pm, c = 1635.1(1) pm, V = 997.3(3) × 10⁶ pm³, Z = 4) contains 1D infinite chains of magnesium coordination octahedra interconnected by a borophosphate tetramer, Mg(H₂O)₂[B₂P₂O₈(OH)₂]·H₂O (monoclinic, P2₁/c (No. 14), a = 776.04(5) pm, b = 1464.26(9) pm, c = 824.10(4) pm, β = 90.25(1)°, V = 936.44(9) × 10⁶ pm³,Z = 4) represents the first layered borophosphate with 6³ net topology. The structures are discussed and classified in terms of structural systematics.     

Synthesis and characterizations of two anhydrous metal borophosphates: M2BP3O12 (M=Fe, In)

Two members of M^III₂BP₃O₁₂ borophosphates, namely Fe₂BP₃O₁₂ and In₂BP₃O₁₂, were synthesized by the solid-state method and characterized by the X-ray single crystal diffraction, the powder diffraction and the electron microscopy. They both crystallize in the hexagonal system, space group P6(3)/m (no. 176) and feature 3D architectures, build up of the M₂O₉ units and B(PO₄)₃ groups via sharing the corners; however, they are not isomorphic for the different crystallographically distinct atomic positions. Optical property measurements of both compounds and magnetic susceptibility measurements of Fe₂BP₃O₁₂ also have been performed. Moreover, in order to gain further insights into the relationship between physical properties and band structure of the M^III₂BP₃O₁₂ borophosphates, theoretical calculations based on density functional theory (DFT) were performed using the total-energy code CASTEP.     

(Ni3–xMgx)[B3P3O12(OH)6] · 6 H2O (x ≈ 1.5): A Novel BorophosphateHydrate Containing Isolated Six‐Membered Rings of Tetrahedra

A novel borophosphate‐hydrate, (Ni_3–xMg_x)[B₃P₃O₁₂(OH)₆] · 6 H₂O (x ≈ 1.5), has been prepared by hydrothermal synthesis (T = 170 °C) from a mixture of NiCl₂ · 6 H₂O, Mg(OH)₂, B₂O₃ and H₃PO₄. The crystal structure was determined at 293 K from single‐crystal X‐ray diffraction data (trigonal, R3c (no. 167), a = 14.957(10) Å, c = 13.812(6) Å, V = 2676(2) ų, Z = 6, R₁ = 0.0276, wR₂ = 0.0714 for 779 observed reflections with I > 2σ(I)). The crystal structure contains unbranched six‐membered rings [B₃P₃O₁₂(OH)₆]^6– of alternating corner linked borate and phosphate tetrahedra, which are stacked along [001] and connected via M^IIO₂(OH)₂(H₂O)₂ coordination polyhedra. Hydrogen bonding between the tetrahedral six‐membered rings and M^IIO₂(OH)₂(H₂O)₂ octahedra leads to a further cross‐linking. With respect to the arrangement of isolated six‐membered tetrahedral rings the crystal structure of this borophosphate‐hydrate is closely related to the cyclo‐hexasilicate dioptase, Cu₆[Si₆O₁₈] · 6 H₂O.     

Isotype Borophosphate MII(C2H10N2)[B2P3O12(OH)] (MII = Mg,Mn, Fe,Ni, Cu,Zn): Verbindungen mit Tetraeder‐Schichtverbänden

Isotypic Borophosphates M^II(C₂H₁₀N₂)[B₂P₃O₁₂(OH)] (M^II = Mg, Mn, Fe, Ni, Cu, Zn): Compounds containing Tetrahedral Layers The isotypic compounds M^II(C₂H₁₀N₂) · [B₂P₃O₁₂(OH)] (M^II = Mg, Mn, Fe, Ni, Cu, Zn) were prepared under hydrothermal conditions (T = 170 °C) from mixtures of the metal chloride (chloride hydrate, resp.), Ethylenediamine, H₃BO₃ and H₃PO₄. The orthorhombic crystal structures (Pbca, No. 61, Z = 8) were determined by X‐ray single crystal methods (Mg(C₂H₁₀N₂)[B₂P₃O₁₂(OH)]: a = 936.81(2) pm, b = 1221.86(3) pm, c = 2089.28(5) pm) and Rietveld‐methods (M^II = Mn: a = 931.91(4) pm, b = 1234.26(4) pm, c = 2129.75(7) pm, Fe: a = 935.1(3) pm, b = 1224.8(3) pm, c = 2088.0(6) pm, Ni: a = 939.99(3) pm, b = 1221.29(3) pm, c = 2074.05(7) pm, Cu: a = 941.38(3) pm, b = 1198.02(3) pm, c = 2110.01(6) pm, Zn: a = 935.06(2) pm, b = 1221.33(2) pm, c = 2094.39(4) pm), respectively. The anionic part of the structure contains tetrahedral layers, consisting of three‐ and nine‐membered rings. The M^II‐ions are in a distorted octahedral or tetragonal‐bipyramidal [4 + 2] (copper) coordination formed by oxygen functions of the tetrahedral layers. The resulting three‐dimensional structure contains channels running along [010]. Protonated Ethylenediamine ions are fixed within the channels by hydrogen bonds.     

Rb2Co3(H2O)2[B4P6O24(OH)2]: Ein Borophosphat mit ‐Tetraeder‐Anionenteilstruktur und Oktaeder‐Trimeren (CoO12(H2O)2)

Rb₂Co₃(H₂O)₂[B₄P₆O₂₄(OH)₂]: A Borophosphate with ‐Tetrahedral Anionic Partial Structure and Trimers of Octahedra (Co O₁₂(H₂O)₂) Rb₂Co₃(H₂O)₂[B₄P₆O₂₄(OH)₂] is formed under mild hydrothermal conditions (T = 165 °C) from mixtures of RbOH_(aq), CoCl₂, H₃BO₃, and H₃PO₄ (molar ratio 1 : 1 : 1 : 2). The crystal structure (orthorhombic system) was solved by X‐ray single crystal methods (space group Pbca, No. 61; R‐values (all data): R1 = 0.0699, wR2 = 0.0878): a = 950.1(1) pm, b = 1227.2(2) pm, c = 2007.4(2) pm; Z = 4. The anionic partial structure consists of tetrahedral [B₄P₆O₂₄(OH)₂^8–] layers, which contain three‐ and nine‐membered rings. Co^II is octahedrally coordinated by oxygen and oxygen and H₂O ligands, respectively (coordination octahedra CoO₆ and CoO₄(H₂O)₂). Three adjacent coordination octahedra are condensed via common edges to form trimeric units (CoO₁₂(H₂O)₂). The oxidation state +2 of cobalt was confirmed by magnetic measurements. The octahedral trimers are quasi‐isolated. No long‐range magnetic ordering occurs down to 2 K. Rb⁺ is disordered over three crystallographically independent sites within channels of the structure running parallel [010]; the coordination sphere of Rb⁺ is formed by nine oxygen species of the tetrahedral layers, one OH group and one H₂O molecule.     

MII(C4H12N2)[B2P3O12(OH)] (MII = Co,Zn): Synthesis and Crystal Structure of Novel Open Framework Borophosphates

Two novel borophosphates, M^II(C₄H₁₂N₂)[B₂P₃O₁₂(OH)] (M^II = Co, Zn), exhibiting open frameworks, have been synthesized by hydrothermal reactions (T = 165 °C). The crystal structures of the isotypic compounds have been determined both at 293 K (orthorhombic, Ima2 (no. 46), Z = 4; M^II = Co: a = 12.4635(4) Å, b = 9.4021(4) Å, c = 11.4513(5) Å, V = 1341.90 ų, R₁ = 0.0202, wR₂ = 0.0452, 2225 observed reflections with I > 2σ(I); M^II = Zn: a = 12.4110(9) Å, b = 9.4550(5) Å, c = 11.4592(4) Å, V = 1344.69 ų, R₁ = 0.0621, wR₂ = 0.0926, 1497 observed reflections with I > 2σ(I)). Distorted CoO₆‐octahedra and ZnO₅‐square‐pyramids, respectively, share common oxygen‐corners with BO₄‐, PO₄‐ and (HO)PO₃‐tetrahedra. The tetrahedral groups are linked via common corners to form infinite loop‐branched borophosphate chains [B₂P₃O₁₂(OH)^4–]. The open framework of M^II‐coordination polyhedra and tetrahedral borophosphate chains contains a three‐dimensional system of interconnected structural channels running along [100], [011] and [011], respectively, which are occupied by di‐protonated piperazinium ions.     

Synthesis and Crystal Structure of SrFe[BP2O8(OH)2]

SrFe[BP₂O₈(OH)₂] was synthesised under mild hydrothermal conditions. The crystal structure was determined from single–crystal X–ray diffraction data: triclinic, space group P (No. 2), a = 6.6704(12) Å, b = 6.6927(13) Å, c = 9.3891(19) Å, α = 109.829(5)°, β = 102.068(6)°, γ = 103.151(3)°, V = 364.74(12) ų and Z = 2. The crystal structure of SrFe[BP₂O₈(OH)₂] contains isolated borophosphate oligomers, [BP₂O₈(OH)₂]^5–, which are interconnected by Fe^IIIO₄(OH)₂ coordination octahedra. The resulting three–dimensional framework is characterised by elliptical channels running along [011]. Strontium takes positions inside the channels.     

Cd3[B2P4O14(OH)4]: A 3D Open‐Framework Cadmium Borophosphate with Unique Twisted 8‐Ring Channels

Abstract. The cadmium borophosphate compound Cd₃[B₂P₄O₁₄(OH)₄] was synthesized under mild hydrothermal conditions. The crystal structure was determined by single‐crystal X‐ray diffraction [triclinic, space group P$\bar{1}$ (no. 2), a = 5.4362(11) Å, b = 8.2190(16) Å, c = 8.3918(17) Å, and α = 111.87(3)°, β = 104.63(3)°, γ = 90.73(3)°, V = 334.29(12) ų and Z = 1]. The 3D open framework of the title compound is constructed from BO₃(OH) tetrahedra and 2D layers along the [100] direction. The resulting framework contains twisted eight‐membered rings that form 1D channels.     

Structural Chemistry of Borophosphates,Metalloborophosphates, and Related Compounds

A concept for the classification of crystalline (metallo)borophosphates in terms of structural chemistry is proposed and the compounds known to date are classified in an overview. Similarities and differences with (alumo)silicates and Liebau's classification are discussed with respect to the observation that the different borate and phosphate complexes are not interconnected arbitrarily in borophosphates. By combination and extension of existing concepts for silicates and borates a hierarchical system based on oligomeric building units has been developed. The observed connection rules are rationalized and the strong influence of the composition on dimensionality and structural motifs of the formed anions is pointed out. Likewise the effect of OH groups is taken into account by grading anions according to the degree of protonation (ratio O:OH). A general distinction is made between tetrahedral and mixed coordinated borophosphates. Metalloborophosphates are treated separately as special cases of borophosphates. Finally, anion‐substituted compounds, border cases, and borate‐phosphates complete the overview.