Carbonyl allylation of aldehydes catalyzed by a silica-supported poly-γ-diphenylarsinopropylsiloxane palladium(0) complex

A silica-supported poly-γ-diphenylarsinopropylsiloxane palladium(0) complex has been prepared from γ-chloropropyltriethoxysilane via immobilization on fumed silica, followed by reacting with potassium diphenylarsenide and palladium chloride, and then the reduction with hydrazine hydrate. The palladium(0) complex has been found to catalyze the allylation of aldehydes via the formation of π-allylpalladium complexes, using allylic chlorides as allylating agent and SnCl₂ as reducing agent. This polymeric palladium complex can be recovered and reused.     

Structural Isomers of Bis(diphenylarsino)methane‐dichloroplatinum(II)

From a range of preparative methods, three geometric isomers of bis(diphenylarsino)methane‐dichloroplatinum(II) have been isolated, viz. cis‐PtCl₂(dpam), trans, trans‐Pt₂Cl₄(dpam)₂ and cis, trans‐Pt₂Cl₄(dpam)₂. Their structures were determined by single‐crystal X‐ray diffraction.     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.     

Synthesis,spectroscopic and structural characterisation of vanadium(IV) and oxovanadium(IV) complexes with arsenic donor ligands

The reaction of o-C₆H₄(AsMe₂)₂ with VCl₄ in anhydrous CCl₄ produces orange eight-coordinate [VCl₄{o-C₆H₄(AsMe₂)₂}₂], whilst in CH₂Cl₂ the product is the brown, six-coordinate [VCl₄{o-C₆H₄(AsMe₂)₂}]. In dilute CH₂Cl₂ solution slow decomposition occurs to form the V^III complex [V₂Cl₆{o-C₆H₄(AsMe₂)₂}₂]. Six-coordination is also found in [VCl₄{MeC(CH₂AsMe₂)₃}] and [VCl₄{Et₃As)₂]. Hydrolysis of these complexes occurs readily to form vanadyl (VO²⁺) species, pure samples of which are obtained by reaction of [VOCl₂(thf)₂(H₂O)] with the arsines to form green [VOCl₂{o-C₆H₄(AsMe₂)₂}], [VOCl₂{MeC(CH₂AsMe₂)₃}(H₂O)] and [VOCl₂(Et₃As)₂]. Green [VOCl₂(o-C₆H₄(PMe₂)₂}] is formed from [VOCl₂(thf)₂(H₂O)] and the ligand. The [VOCl₂{o-C₆H₄(PMe₂)₂}] decomposes in thf solution open to air to form the diphosphine dioxide complex [VO{o-C₆H₄(P(O)Me₂)₂}₂(H₂O)]Cl₂, but in contrast, the products formed from similar treatment of [VCl₄{o-C₆H₄(AsMe₂)₂}_x] or [VOCl₂{o-C₆H₄(AsMe₂)₂}] contain the novel arsenic(V) cation [o-C₆H₄(AsMe₂Cl)(μ-O)(AsMe₂)]⁺. X-ray crystal structures are reported for [V₂Cl₆{o-C₆H₄(AsMe₂)₂}₂], [VO(H₂O){o-C₆H₄(P(O)Me₂)₂}₂]Cl₂, [o-C₆H₄(AsMe₂Cl)(μ-O)(AsMe₂)]Cl·[VO(H₂O)₃Cl₂] and powder neutron diffraction data for [VCl₄{o-C₆H₄(AsMe₂)₂}₂].     

Non-cross-linked polystyrene-supported triphenylarsonium halides and their use in the arsa-Wittig reaction

Non-cross-linked polystyrene-supported (carbomethoxymethyl)triphenylarsonium bromide (1) and benzyltriphenylarsonium iodide (2) were synthesized. They showed similar reactivities compared with the free arsonium salts in the arsa-Wittig reaction. The use of the polymer-supported reagents facilitated product purification and rendered the organoarsenic reagents easily separable and recyclable.     

二氧化硅负载聚-γ-(二苯胂基)丙基硅氧烷钯(0)配合物的合成与催化卤代芳烃的偶联反应

聚 γ 氯丙基硅氧烷依次与二苯胂钾、氯化钯作用 ,再经水合肼还原 ,合成了二氧化硅负载的聚 γ (二苯胂基 )丙基硅氧烷钯 (0 )配合物 .该钯 (0 )配合物可有效地催化芳基卤化物与烯烃、炔烃、Grignard试剂之间的交叉偶联反应 ,并且可以回收再用多次 ,其活性基本保持不变 .     

Direct determination of arsine in gases by inductively coupled plasma-dynamic reaction cell-mass spectrometry

Reliable determination of arsine (AsH₃) in gases is of great importance due to stringent regulations associated with health, safety and environmental issues. It is, however, challenging for an analyst to determine trace airborne arsine concentrations without specifically designed collection procedures using adsorption, desorption, dissolution or impinging techniques. To circumvent such technical barrier, we have newly developed a direct analytical method, characterized by introduction of an arsine gas sample into stable plasma stream, followed by gas-phase oxidation of arsine with molecular oxygen in a dynamic reaction cell (DRC) equipped within the inductively coupled plasma-mass spectrometry (ICP/MS) system, followed by subsequent detection of AsO⁺ ion. This preliminary work used trace arsine concentrations (161 μg m⁻³, 322 μg m⁻³, and 645 μg m⁻³) gravimetrically prepared in N₂ balance. The proposed method was optimized for the important experimental parameters such as the flow rates of the reaction gas, the arsine sample, and the carrier gas. This method was then validated by demonstrating good figure-of-merits including the low limit of detection (0.10 μg m⁻³), good linearity (r² > 0.9915), low measurement uncertainty (0.66%), and high speed of analysis (<6 min). The proposed method is expected to be potentially applicable to the determination of arsine in real workplace air after appropriate modifications are made.     

Asymmetric synthesis of a chiral arsinophosphine via a metal template promoted asymmetric Diels-Alder reaction between diphenylvinylphosphine and 2-furyldiphenylarsine

The asymmetric Diels-Alder reaction between 2-furyldiphenylarsine and diphenylvinylphosphine was achieved stereospecifically by utilizing an organoplatinum reaction promoter containing the ortho-metalated (R)-(1-(dimethylamino) ethyl)-naphthalene as the chiral auxiliary. The optically pure (+)-As-P heterobidentate cycloadduct could be liberated from the template product by successive treatment with concentrated hydrochloric acid and aqueous potassium cyanide.     

AlGaAs/GaAs/AlGaAs quantum wells as a sensitive tool for the MOVPE reactor environment

We present in this work a simple quantum well (QW) structure consisting of GaAs wells with AlGaAs barriers as a probe for measuring the performance of arsine purifiers within a metalorganic vapour phase epitaxy system. Comparisons between two different commercially available purifiers are based on the analysis of low-temperature photoluminescence emission spectra from thick QWs, grown on GaAs substrates misoriented slightly from (1 0 0). Neutral excitons emitted from these structures show extremely narrow linewidths, comparable with those that can be obtained by molecular beam epitaxy in an ultra-high vacuum environment, suggesting that purifications well below the 1 ppb level are needed to achieve high quality quantum well growth.