Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

Effects of nickel on the crystallization of Zr70Cu20Ni10 amorphous alloy

Differential scanning calorimetry (DSC) and x-ray diffraction (XRD) are employed to investigate the effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy. We have found that the crystallization process of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is strongly influenced by the addition of nickel. Addition of 10 at% Ni to the Zr₇₀Cu₃₀ amorphous alloy makes the crystallization process proceed from a single-stage mode to a double-stage mode. The activation energy for crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy is calculated to be about 388kJ·mol^-1 on the basis of the Kissinger equation. The effects of nickel on the crystallization of the amorphous Zr₇₀Cu₂₀Ni₁₀ alloy are discussed in terms of the genetics of metals.     

Influence of relaxation effects on probabilities of the 2s2p35S2－2s22p2 3P1，2 intercombination transitions in NII

Transition probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} intercombination transitions in NII have been calculated by using a large-scale multiconfiguration Dirac－Fock method. In the calculation the most important effects of relativity, correlation, and relaxation are considered. From the calculated transition probabilities, the lifetime of the 2s2p^3 {}^5S_2 metastable state is derived. The result is in excellent agreement with the latest experimental result. In the meantime the influence of anomalously strong relaxation effects on probabilities of the 2s2p^3 {}^5S_2－2s^22p^2 {}^3P_{1,2} lines in NII have been found.     

SO4●－自由基氧化酪氨酸反应中的溶剂效应

研究了水-乙腈混合溶液中SO4●－自由基氧化酪氨酸的反应.实验结果表明，SO4●－自由基氧化酪氨酸的反应机制不因乙腈的加入而改变，但所产生的瞬态粒子的动力学行为受到较大影响.随介质中乙腈体积分数的增加，SO4●－的衰变速率减慢而酪氨酸中性自由基（TyrO●）的衰变速率加快.我们认为这两种自由基所呈现出来的相反的溶剂效应是由于其所带电荷的不同.随介质中乙腈体积分数的增加，SO4●－氧化酪氨酸的反应速率减慢.这一实验结果意味着，在有机溶剂存在的情况下TyrO●/ TyrOH的氧化还原电势可能发生了变化，从而旁证了关于TyrO●/ TyrOH的氧化还原电势因酪氨酸从游离状态变到肽或蛋白质中而发生变化的推测.     

Co—Mo／MgO—Al2O3水煤气耐硫变换催化剂失活的研究

利用Ｘ－射线衍射，扫描电镜，拉曼光谱，等离子发射光谱和比表面测定等方法研究了不同状态下失活及新鲜催化剂的结构，杂种类及含量。结果表明，超温使催化剂晶化明显，制备方法对催化剂结构有直接影响，再生使其强度降低，条形催化剂比较容易粉化，无机杂质是次要的失活原因。     

Comparative study of spectroscopic properties of Er^3＋／Yb^3＋-codoped tellurite glass and fibres under 980nm excitation＊

A tellurite fibre of TeO_{2}－ZnO－La_{2}O_{3}－Li_{2}O glass codoped with 20000 ppm ytterbium and 5000 ppm erbium was fabricated by the suction casting and rod-in-tube technologies. The absorption spectrum of Er^{3+}/Yb^{3+} -codoped bulk glass has been measured. From the Judd－Ofelt intensity parameters, the spontaneous emission probability and radiative lifetime τ_{rad} of Er^{3+}:{}^{4}I_{13/2}→{}^{4}I_{15/2} transition for the bulk glass have been calculated. The emission fluorescence spectra and lifetimes around 1.5μm, and subsequent upconversion fluorescence in the range of 500－700nm were measured in fibres and compared with those in bulk glass. The changes in amplified spontaneous emission with fibre length and pumping power was also measured. It was found that the emission spectrum from erbium in fibres is almost twice as broad as the corresponding spectrum in bulk glass when pumped at 980nm.     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).     

Liquid phase microextraction applications in food analysis

Over the last years, liquid-phase microextraction (LPME) in its different application modes (single drop microextraction, dispersive liquid-liquid microextraction and hollow fiber-LPME) has been increasingly applied for the extraction of both inorganic and organic analytes from different matrices. Its advantages over conventional extraction procedures (simplicity, effectiveness, rapidity and low consumption of organic solvents) has also attracted its application in the complex food analysis field, in which it has clearly provided good and challenging results. A comprehensive review dealing with those articles published since its introduction till the end of March 2011 is presented, offering also a critical vision of the analytical potential of LPME for the analysis of foods.     

Double threshold behaviour of I－V characteristics of CoSi2/Si Schottky contacts

The forward current－voltage (I－V) characteristics of polycrystalline CoSi₂/n-Si(100) Schottky contacts have been measured in a wide temperature range. At low temperatures (≤200K), a plateau-like section is observed in the I－V characteristics around 10^-4A·cm^-2. The current in the small bias region significantly exceeds that expected by the model based on thermionic emission (TE) and a Gaussian distribution of Schottky barrier height (SBH). Such a double threshold behaviour can be explained by the barrier height inhomogeneity, i.e. at low temperatures the current through some patches with low SBH dominates at small bias region. With increasing bias voltage, the Ohmic effect becomes important and the current through the whole junction area exceeds the patch current, thus resulting in a plateau-like section in the I－V curves at moderate bias. For the polycrystalline CoSi₂/Si contacts studied in this paper, the apparent ideality factor of the patch current is much larger than that calculated from the TE model taking the pinch-off effect into account. This suggests that the current flowing through these patches is of the tunnelling type, rather than the thermionic emission type. The experimental I－V characteristics can be fitted reasonably well in the whole temperature region using the model based on tunnelling and pinch-off.     

Exact solutions for nonlinear Schr?dinger equation in phase space: applications to Bose－Einstein condensate

The stationary-state nonlinear Schr?dinger equation, which models the dilute-gas Bose－Einstein condensate, is introduced within the framework of the quantum phase-space representation established by Torres-Vega and Frederick. The exact solutions of equation are obtained in the phase space, by means of the wave-mechanics method. The eigenfunctions in position and momentum spaces are obtained through the ‘Fourier-like' projection transformation from the phase space eigenfunctions. The eigenfunction with a hypersecant part is discussed as an example.