LC-MS/MS method for the confirmatory determination of aromatic amines and its application in textile analysis

A confirmation method for the determination of 18 aromatic amines originating from azo dyes after reductive cleavage was developed. The method is based on the use of high-performance liquid chromatography/tandem mass spectrometry with atmospheric-pressure chemical ionization. For the identification of the analytes one precursor ion and two daughter ions (multi-reaction monitoring, MRM) were selected and the LC-MS/MS parameters optimized to obtain high sensitivity and selectivity. The linear ranges varied from 0.1–1 to 30–50 g mL^–1 with correlation coefficients of 0.99 or better. The applicability of the method to determine o-tolidine (3,3-dimethylbenzidine) and 3,3-dimethoxybenzidine in textiles following reductive cleavage of acid red 114, trypan blue, and Chicago sky blue 6B was demonstrated.     

Rapid and sensitive liquid chromatography-tandem mass spectrometry for the quantitation of epirubicin and identification of metabolites in biological samples

A highly sensitive and selective liquid chromatography-mass spectrometry (LC-MS) method has been developed for the determination of epirubicin in serum and cell specimens using daunorubicin as an internal standard. Using atmospheric pressure chemical ionisation (APCI), the epirubicin metabolites were readily distinguishable by their fragmentation pattern in the mass spectrometer. Selected reaction monitoring (SRM) mode was employed for quantitation of epirubicin and the metabolites. Following extraction, chromatography was performed on a C18 column with a mobile phase consisting of water-acetonitrile-formic acid, pH 3.2, with a flow rate of 200 μl/min. The limit of detection (LOD) and the limit of quantitation (LOQ) of this method in serum were determined to be 1.0 and 2.5 ng/ml, respectively. Linearity of the method was verified over the concentration range of 2.5-2000 ng/ml, with a high correlation coefficient (R² ≥ 0.998). For the extraction procedure, an aliquot of 500 μl serum, spiked with internal standard, was extracted using a chloroform-2-isopropanol (2:1, v/v) mixture. The method has been applied to the analysis of epirubicin in cancer cell samples and the identification of known and unknown metabolites in clinical trial patient serum samples.     

The hydrolysis mechanism of bis(2,4-di-tert-butyl)pentaerythritol diphosphite (Alkanox P24): An atmospheric pressure photoionisation mass spectrometric study

Alkanox P24 is a commercial phosphite antioxidant, well known in the literature for its excellent processing stability. As in the case of many processing phosphites, however, Alkanox P24 might undergo hydrolysis when exposed to small amounts of water. A number of products proposed recently in the hydrolytic pathway of the phosphite [Ortuoste N, Allen NS, Papanastasiou M, McMahon A, Edge M, Johnson B, et al. Polym Degrad Stab; 2006;91:195-211] are investigated in this study by atmospheric pressure ionisation-mass spectrometry (API-MS). The applicability of atmospheric pressure photoionisation (APPI) and atmospheric pressure chemical ionisation (APCI) ion sources is tested and the ion formation characteristics of Alkanox P24 are compared in both sources. In positive ion mode, ionisation of the parent phosphite occurred by protonation. In negative ion mode no pseudo-molecular ion peak was detected and the deprotonated species were more dominant in APPI. This source was employed further for the investigation of the hydrolysis products, since it exhibited lower limits of detection. High performance liquid chromatography (HPLC) with single ion monitoring (SIM) detection was used for the separation of the species formed. Hydrolysis of the phosphite proceeded via the scission of the two P-O_phenol bonds exclusively to give 2,4-di-tert-butyl phenol quantitatively as a final product.     

Positive ion chemistry of esters of carboxylic acids in air plasma at atmospheric pressure

Ionization of esters of carboxylic acids RCOOR' (R = H, alkyl; R' = alkyl) within the air plasma of the Atmospheric Pressure Chemical Ionization (APCI) source occurs largely via H(+)-transfer and, to a minor extent, via NO(+) association. The protonated ester MH(+) is normally observed as M(2)H(+) and as higher aggregates (M(3)H(+), M(3)H(+)(H(2)O)) also at high source temperature. The behavior of M(2)H(+) upon collisional activation is consistent with the reported dissociation of proton-bound dimers to MH(+) species that, in turn, fragment according to the known paths of lowest energy. In addition, other important product ions form within the plasma, some in very high relative abundance, which are attributed to ion-molecule condensation reactions between neutral M and either MH(+) or M(2)H(+) resulting in the elimination of CO, R'OH, alkene from the alkoxy moiety of the ester and HCOOH. A general scheme is proposed to account for the experimental observations, which suggest that the encounter complex formed between MH(+) and M or between M(2)H(+) and M may either collisionally relax to the protonated dimer or trimer, respectively, or react via covalent bond forming and cleaving steps to eliminate stable neutral molecules. The proposed scheme is supported by both the observed concentration dependence and the temperature dependence of the products relative abundances within the plasma. Such reactions can be the dominant process, as in the case of formate esters. A second significant ionization route involves addition of NO(+) to form M(n)NO(+) (n = 1, 2, 3). An additional product corresponding to [M(2)NO(+) - CO(2)] is also observed with iso- and n-butyl formate esters.     

A liquid chromatography-mass spectrometry method for the quantification of both etoricoxib and valdecoxib in human plasma

A practicable and selective liquid chromatography-mass spectrometry assay for the determination of two cyclooxygenase-2 inhibitors, etoricoxib and valdecoxib, in human plasma is presented. The analytical technique is based on reversed-phase high-performance liquid chromatography (HPLC) coupled to atmospheric pressure chemical ionisation (APCI) mass spectrometry (Finnigan Mat LCQ ion trap). Mass analysis was performed in the positive ion mode. The ion trap was operated in the tandem MS mode (MS2) and the transitions of etoricoxib (m/z 359.2 --> 280.3) and valdecoxib (m/z 315.1 --> 235.1) were followed by selected reaction monitoring. Retention times of etoricoxib and valdecoxib were 1.05 and 1.08 min, respectively. The method was validated over a linear range 10-2500 and 5-1000 microg/L using the other substrate as internal standard. After validation, the method was used to study the pharmacokinetic pro fi le of etoricoxib or valdecoxib in a healthy volunteer after administration of a single oral dose (valdecoxib, 20 mg; etoricoxib, 90 mg). The presented method was suf fi cient to cover more than 90% of the area under the plasma concentration time curve.     

Study of the carbonyl products of terpene/OH radical reactions: detection of the 2,4-DNPH derivatives by HPLC-MS

The oxidation of the terpenes - and -pinene, limonene and ³-carene by hydroxyl radicals has been investigated in a fast-flow reactor coupled to a liquid nitrogen trap for collecting the carbonyl compounds. Identification of the products was performed via 2,4-dinitrophenylhydrazone (DNPH) derivatization of the carbonyls to form the mono- and di-DNPH derivatives, which were analysed by high-performance liquid chromatographic (HPLC)-DAD (diode array detector) and HPLC-mass spectrometry (HPLC-MS). Both electrospray ionization [ESI(–)] and atmospheric pressure chemical ionization [APCI(–)] were suitable for the detection of the DNPH derivatives of formaldehyde, acetaldehyde, myrtanal, campholene aldehyde, perillaldehyde, acetone, nopinone, trans-4-hydroxynopinone and 4-acetyl-1-methylcyclohexene. Also the mono-DNPH derivatives of the dicarbonyl compounds pinonaldehyde, endolim and caronaldehyde could be identified. The MS² spectra generated in the ion trap of the mass spectrometer allowed us to distinguish between aldehydes and ketones on the basis of the characteristic fragment ion m/z 163 for the aldehydes. For the quantitative analysis of the mono-DNPH derivatives, ESI(–) in combination with single ion monitoring (SIM) detection showed the lowest detection limits. For the quantification of the dicarbonyl compounds, the acid-sensitive di-DNPH derivatives had to be formed by keeping the acidity in the acid-catalysed derivatization reaction at about 1.7 mM H₂SO₄. Detection of these dicarbonyl compounds can only be performed by APCI(–) with somewhat lesser sensitivity than by HPLC-DAD.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Contribution of Supercritical Fluid Chromatography coupled to High Resolution Mass Spectrometry and UV detections for the analysis of a complex vegetable oil – Application for characterization of a Kniphofia uvaria extract

Lipids are an important and diverse group of naturally occurring organic compounds present in all biological entities. They play many essential roles in the survival of the organisms. Analysis of lipids is extremely complex due to their large variety of chemistries. In this work, we describe an innovative method for the characterization of the lipid composition in a complex and unknown vegetable oil: an extract of Kniphofia uvaria seeds; using Supercritical Fluid Chromatography (SFC) coupled to Atmospheric Pressure Chemical Ionization (APCI), High-Resolution Mass Spectrometry (HRMS) and UV detections. Thanks to the properties of supercritical CO₂ allowing the use of a large number of chromatographic columns, an effective separation for this complex matrix was obtained.     

Impact of APCI ionization source in liquid chromatography tandem mass spectrometry based tissue distribution studies

Measurement of test article concentration in tissue samples has been an important part of pharmacokinetic study and has helped to co‐relate pharmacokinetic/pharmacodynamic relationships since the 1950s. Bioanalysis of tissue samples using LC–MS/MS comes with unique challenges in terms of sample handling and inconsistent analyte response owing to nonvolatile matrix components. Matrix effect is a phenomenon where the target analyte response is either suppressed or enhanced in the presence of matrix components. Based on previous reports electrospray ionization (ESI) mode of ionization is believed to be more affected by matrix components than atmospheric pressure chemical ionization (APCI) or atmospheric pressure photoionization. To explore the impact of ionization source with respect to bioanalysis of tissue samples, five structurally diverse compounds – atenolol, verapamil, diclofenac, propranolol and flufenamic acid – were selected. Quality control standards were spiked into 10 different biological matrices like whole blood, liver, heart, brain, spleen, kidney, skeletal muscle, eye and skin tissue and were quantified against calibration standards prepared in rat plasma. Quantitative bioanalysis was performed utilizing both APCI and ESI mode and results were compared. Quality control standards when analyzed with APCI mode were found to be more consistent in terms of accuracy and precision as compared with ESI mode. Additionally, for some instances, up to 20‐fold broader dynamic linearity range was observed with APCI mode as compared with ESI mode. As phospholid interferences have poor response in APCI mode, protein precipitation extraction technique can be used for multimatrix quantitation, which is more amenable to automation. The approach of multiple biological matrix quantitation against a single calibration curve helps bioanalysts to reduce turnaround time. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparison of direct mass spectrometry methods for the on‐line analysis of volatile compounds in foods

For the on‐line monitoring of flavour compound release, atmospheric pressure chemical ionization (APCI) and proton transfer reaction (PTR) combined to mass spectrometry (MS) are the most often used ionization technologies. APCI‐MS was questioned for the quantification of volatiles in complex mixtures, but direct comparisons of APCI and PTR techniques applied on the same samples remain scarce. The aim of this work was to compare the potentialities of both techniques for the study of in vitro and in vivo flavour release. Aroma release from flavoured aqueous solutions (in vitro measurements in Teflon bags and glass vials) or flavoured candies (in vivo measurements on six panellists) was studied using APCI‐ and PTR‐MS. Very similar results were obtained with both techniques. Their sensitivities, expressed as limit of detection of 2,5‐dimethylpyrazine, were found equivalent at 12 ng/l air. Analyses of Teflon bag headspace revealed a poor repeatability and important ionization competitions with both APCI‐ and PTR‐MS, particularly between an ester and a secondary alcohol. These phenomena were attributed to dependency on moisture content, gas/liquid volume ratio, proton affinities and product ion distribution, together with inherent drawbacks of Teflon bags (adsorption, condensation of water and polar molecules). Concerning the analyses of vial headspace and in vivo analyses, similar results were obtained with both techniques, revealing no competition phenomena. This study highlighted the equivalent performances of APCI‐MS and PTR‐MS for in vitro and in vivo flavour release investigations and provided useful data on the problematic use of sample bags for headspace analyses. Copyright © 2013 John Wiley & Sons, Ltd.