Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.     

Paul阱内的压缩效应与量子跃迁

处理一个一维Ｐａｕｌ阱系统中的压缩现象与量子跃迁现象，对于阱内的最强压缩态和共振跃迁（一种极不稳定状态）之间的关系作了阐述，并对利用压缩性质在阱内进行精密测量的可能性作了讨论     

Approximate confidence limits of the reliability performances for a cold standby series system

This paper is to investigate the approximate confidence limits of the reliability performances (such as failure rate, reliability function and average life) for a cold standby series system. The Bayesian approximate upper confidence limit of failure rate is obtained firstly, and next Bayesian approximate lower confidence limits for reliability function and average life are presented. The expressions for calculating Bayesian lower confidence limits of the reliability function and average life are also obtained, and an illustrative example is examined numerically by means of the Monte-Carlo simulation. Finally, the accuracy of confidence limits is discussed.     

一类拟线性大系统的稳定性

本文应用大系统的分解方法和一个推广的不等式,研究了一类拟线性大系统的稳定性问题,所得结果简洁、易于验证,且推导过程不复杂,最后给出了应用实例。     

280mm×280mm口径单脉冲过程电光开关

用于高功率惯性约束聚变(ICF)激光驱动器的大口径电光开关均采用等离子体电极泡克耳斯盒。与传统的等离子体电极电光开关原理不同,单脉冲过程驱动电光开关没有独立的大电流等离子体发生单元,而只是通过具有较高幅值的正负开关脉冲完成对大口径电光开关的驱动。介绍单脉冲过程驱动等离子体电极泡克耳斯盒电光开关的设计,并建立280 mm×280 mm口径电光开关实验平台,利用连续激光器测试了电光开关特性,实验测得该电光开关中心处开关效率为99.3%,开关上升时间为90 ns。     

57Fe Mössbauer Spectroscopy Study of LaFe1−x Co x O3 (x=0 and 0.5) Formed by Mechanical Milling

Hyperfine Interactions - Perovskite-related phases of the type LaFe1?x Co x O3 (x=0 and 0.5) have been synthesised by milling techniques. The materials are of smaller particle size and more...     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

长叶烯通过异构化,氧化和Prins反应合成新型香料

本文报道综合利用长叶烯（１）催化异构化为异长叶烯（２）及合成系列香料的方法；通过氧化反应合成不同香型烯醇酯类等；Ｐｒｉｎｓ反应合成系列化合物。鉴定了１０种香料化合物的香型。     

Diffusion characteristics of a T-type microchannel with different configurations and inlet angles.

A series of symmetrical and asymmetrical microfluidic T-sensors with different inlet angles were fabricated to study the mixing characteristics of a T-type microstructure for generating concentration gradient. Computational fluid dynamics (CFD) simulations showed that the concentration gradient, transition zone and diffusion length were different for various configurations and inlet angles. Quick mix and sharp concentration gradient occurred in the asymmetrical structure with large inlet angle. The observed concentration gradients in the fabricated microchannel were consistent with the theoretical prediction. In this microstructure, stagnant zone and z-direction diffusion also affected the concentration gradient. Based on the simulation results, the microfluidic structure was optimized to generate desired concentration gradient for a cell-based study.     

The stereoselective synthesis of novel macrolide antibacterial agents via an intramolecular 1,3-dipolar cycloaddition of azomethine ylide

An intramolecular 1,3-dipolar cycloaddition of azomethine ylide, generated in situ via the reaction of C12-glycinate derivative of macrolide with formaldehyde, provided a novel tricyclic macrolide. The high stereoselectivity of this [2+3] reaction was achieved by introducing a suitable directing group at C-6 position of macrolide.