Enhanced Thermal Decomposition Properties and Catalytic Mechanism of Ammonium Perchlorate over CuO/MoS2 Composite

In this report, CuO/MoS₂ composites were successfully prepared by the hydrothermal method where nano‐sized CuO was uniformly distributed on the surface of hierarchical MoS₂ substrates (CuO/MoS₂ composites). Their physicochemical properties and catalytic performance in ammonium perchlorate (AP) decomposition were investigated and characterized by XRD, SEM, TEM, BET, XPS, TG/DSC and combustion measurement. The results showed that it could decrease AP decomposition temperature at high decomposition stage from 416.5 °C to 323.5 °C and increase the heat release from 378 J/g (pure AP) to 1340 J/g (AP with catalysts), which was better than pure CuO nanoparticles (345.5 °C and 1046 J/g). Meanwhile, it showed excellent performance in combustion reaction either in N₂ or air atmosphere. The results obtained by photocurrent spectra, photoluminescence spectra and time‐resolved fluorescence emission spectra indicated that loading CuO mediated the generation rate and combination rate of electrons and holes, thus tuning the catalytic performance on AP decomposition. This study proved that employing the supports that can synergistically interact with CuO is an efficient strategy to enhance the catalytic performance of CuO.     

N型TOPCon晶硅太阳能电池光注入退火增效的研究

N型隧穿氧化层钝化接触(Tunnel Oxide Passivating Contacts,TOPCon)太阳能电池完成印刷烧结后,再经过光注入,效率有明显提升,主要表现在V_oc(开路电压)及FF(填充因子)的提升。其机理在于通过温度和光照强度调节费米能级变化,控制H总量及价态来提高钝化性能。钝化膜层的质量、硅基体掺杂浓度、光注入退火时的工艺温度等对光注入退火工艺提升效率有很大影响。实验证明转换效率越低的电池片经过光注入后效率提升幅度越大;转换效率越高的电池片缺陷会更小,经过光注入退火工艺后几乎无增益。另外同心圆在经过光注入退火工艺后会明显消除。本文主要研究温度、光强、基体电阻率、正表面金属接触面积大小、poly-Si(多晶硅)厚度对光注入退火工艺增效的影响。     

High-strength and low-swelling chitosan/cellulose microspheres as a high-efficiency adsorbent for dye removal

Cellulose - Dye contamination of water supplies has a serious threat to human health, prompting the development of highly effective and eco-friendly adsorbents. In this work, polyelectrolyte...     

Quantification of multiple compounds containing heterogeneous elements in the mixture by one‐dimensional nuclear magnetic resonance spectroscopy of different nuclei using a single universal concentration reference

One‐dimensional (1D) quantitative NMR (qNMR) is a useful tool for concentration determination due to its experimental simplicity and the direct proportionality of the integrated signal area to the number of nuclei spin. For complex mixtures, however, signal overlapping often in one‐dimensional quantitative ¹H NMR (1D ¹H qNMR) spectrum limits the accurate quantification of individual compound. Here, we introduced employing joint 1D qNMR methods of different nuclei, such as ¹H and ³¹P (or/and ¹⁹F), to quantify multiple compounds in a complex mixture using a single universal concentration reference. When the concentration ratio of several compounds containing different elements in a complex mixture is of interest, the result calculated from measured intensities from 1D qNMR of different nuclei is independent of the gravimetric error from the reference. In this case, the common reference also serves as a ‘quantitative bridge’ among these 1D qNMR of different nuclei. Quantitative analysis of choline, phosphocholine, and glycerophosphocholine mixture is given as an example using trimethylphosphine oxide ((CH₃)₃P(O)) as concentration reference. Compounds containing multiple elements, such as tetramethylammonium hexafluorophosphate (N⁺(CH₃)₄PF₆^?), are proposed as the common concentration reference for ¹H, ¹³C, ¹⁵N, ³¹P, and ¹⁹F qNMR for the quantitative analysis of complex mixture containing these different elements. We anticipate that the proposed joint 1D qNMR approach using a universal concentration reference will be a valuable alternative for simultaneous quantification of multiple compounds in a complex mixture due to its accuracy and single and simple sample preparation. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfur-Containing Bent N-Heteroacenes

A series of novel sulfur-containing bent N-heteroacenes were constructed and characterized by NMR and UV/Vis spectroscopy, cyclic voltammetry, and single-crystal X-ray diffraction. By introducing sulfur-containing groups (thio, sulfinyl, and sulfonyl) into bent azaacenes, their electronic delocalization was improved and frontier energy levels were modulated. The target products displayed tunable optical and electronic properties through altering the valence of sulfur and fused length of the azaacenes. For the first time, typical products were utilized as organic field effect transistor materials, affording promising results.     

Direct Synthetic Processes for Cyclic Carbonates from Olefins and CO<Subscript>2</Subscript>

This short review presents the recent developments in the direct synthesis of cyclic carbonates from olefins and CO₂. The straightforward synthesis of cyclic carbonates from olefins instead of epoxides, also called one-pot “oxidative carboxylation” of olefins, can be viewed as the coupling of two sequential reactions of epoxidation of olefins and CO₂ cycloaddition to epoxides formed. The facile synthetic approach would make carbonate synthesis simpler and even cheaper with industrial potential from environmental and economic points of view. Some progresses have been made on this direct synthetic reaction for cyclic carbonates with homogeneous and heterogeneous catalysts, however, this reaction system is still at a preliminary stage. Among the catalysts reported, only a few can be considered as effective for the direct oxidative carboxylation of olefins to cyclic carbonates. Thus active and selective catalysts should be explored to put the direct synthesis of cyclic carbonates into practical applications.     

Mn:ZnSe/ZnS核-壳结构纳米晶的无膦法制备和光学性质

以溶于十八烯的Se作为Se前驱体,在无膦条件下制备得到了具有较高量子产率的Mn:ZnSe纳米晶.为了进一步提高纳米晶的稳定性和发光强度,运用外延生长的方法进行ZnS壳层包覆并得到了具有核-壳结构的Mn:ZnSe/ZnS纳米晶.X射线衍射、透射电子显微镜及吸收和荧光光谱测试结果表明,该方法合成的Mn:ZnSe纳米晶以及核-壳结构Mn:ZnSe/ZnS纳米晶均为闪锌矿结构,具有良好的单分散性,包覆ZnS外壳层后量子产率可达到60%以上.此外,对ZnS壳层厚度和Mn2+的掺杂量对Mn:ZnSe/ZnS纳米晶发光强度的影响及发光机制也进行了初步讨论.     

A novel way to synthesize Pb nanotapes in liquid ammonia

Lead nanotapes were synthesized in liquid ammonia solvent in the presence of sodium metal at low temperature.The process was template free.Transmission electron microscopy(TEM) observations and X-ray diffraction(XRD) characterizations revealed that the as-prepared Pb nanotapes have average diameters in the range of 40-50 nm.and lengths up to several hundred nanometers, and exhibit cubic crystal structures.     

Engineering Sensitized Photon Upconversion Efficiency via Nanocrystal Wavefunction and Molecular Geometry

Triplet energy transfer from inorganic nanocrystals to molecular acceptors has attracted strong attention for high‐efficiency photon upconversion. Here we study this problem using CsPbBr₃ and CdSe nanocrystals as triplet donors and carboxylated anthracene isomers as acceptors. We find that the position of the carboxyl anchoring group on the molecule dictates the donor‐acceptor coupling to be either through‐bond or through‐space, while the relative strength of the two coupling pathways is controlled by the wavefunction leakage of nanocrystals that can be quantitatively tuned by nanocrystal sizes or shell thicknesses. By simultaneously engineering molecular geometry and nanocrystal wavefunction, energy transfer and photon upconversion efficiencies of a nanocrystal/molecule system can be improved by orders of magnitude.