Beam breakup simulation study for a high energy ERL

The maximum beam current that can be accelerated in an energy recovery linac (ERL) can be severely limited by the transverse multi-pass beam breakup instability (BBU), especially in future ERL light sources with multi-GeV high energy beam energy and more than 100 mA average current. In this paper, the multi-pass BBU of such a high energy ERL is studied based on the simulation of a 3-GeV ERL light source that is proposed by KEK. This work is expected to provide a reference for future high energy ERL projects.     

Beam dynamics and RF design of trapezoidal IH-RFQ with low energy spread

Beam dynamics and RF design have been performed of a new type trapezoidal IH-RFQ operating at 104 MHz for acceleration of 14C+ in the framework of RFQ based 14C AMS facility at Peking University. Low energy spread RFQ beam dynamics design was approached by the method of internal discrete bunching. 14C+ will be accelerated from 40 keV to 500 keV with the length of about 1.1 m. The designed transmission efficiency is better than 95% and the energy spread is as low as 0.6%. Combining the beam dynamics design, a trapezoidal IH-RFQ structure was proposed, which can be cooled more easily and has better mechanical performance than traditional RFQ. Electromagnetic field distribution was simulated by using CST Microwave Studio (MWS). The specific shunt impedance and the quality factor were optimized primarily.     

Preliminary design of a laser accelerator beam line

A compact laser plasma accelerator(CLAPA) is being built at Peking University, which is based on an RPA-PSA mechanism or other acceleration mechanisms. The beam produced by this laser accelerator has the characteristics of short duration, high pulse current, large divergence angle, and wide energy spectrum. The beam cannot be produced by a normal ion source and accelerator. The space charge field in the initial is very strong.According to the beam parameters from preparatory experiments and theoretical simulations, a compact beam line is preliminarily designed. The beam line mainly consists of common transport elements to deliver proton beam with the energy of 1–50 MeV, energy spread of 0–±1% and current of 0–108 proton per pulse to satisfy the requirement of different experiments. The simulation result of a 15 MeV proton beam with an energy spread of ±1%, current of 400 m A, and final spot radius of 9 mm is presented in this paper.     

β=0.45, f=350 MHz Spoke腔的设计

近几年来,低b超导腔(例如spoke型，re-entrant 型,CH型)作为质子或者离子在中低能段的加速结构成为研究的热点.许多实验结果表明spoke腔在低能段是很好的选择,在中能段跟椭球腔相比也很具有竞争实力,为此,北京大学开展了β=0.45,频率为350MHz的spoke型质子超导加速腔研究. 本文详细阐述了这种腔的结构及电磁场的设计,从射频参数Q,r/Q,最大表面电磁场和加速效率的计算结果来看,它具有很好的加速性能.     

分离作用RFQ加速器物理特性的研究

RFQ加速器中加速效率随加速能量的增高而下降,为克服由此导致的RFQ能量局限而提出的分离作用RFQ加速结构,在仍保持采用射频四极场聚焦的同时,将加速与聚焦作用相分离. 综述了对它的加速效率、反场问题、腔体及束流特性研究 的结果,初步证实了其可行性及在较高能量区加速效率得到提高,并对正在研制的一台采用了这种分离作用RFQ的1.5MeV组合加速器做了介绍.     

杆型SFRFQ结构的研究

RFO加速结构是一种非常巧妙的低能强流加速结构,但是它存在能量上限问题.而杆型SFRFQ加速结构是一种改进的无反场的SFRFQ结构.对分离作用杆型RFQ加速结构在能量增益和横向稳定性两个方面进行了研究,最后还和光阑型SFRFQ结构进行了一些简单的比较 关键词： 能量上限问题 RFQ 杆型SFRFQ 反场 光阑型SFRFQ     

北京大学ERL装置交汇段的研究与设计

 在交汇段设计理论的基础上，针对北京大学ERL的具体情况，对交汇段的束流传输结构进行了优化设计，通过模拟得到了满足要求的一组设计参数；研究了空间电荷效应以及相干同步辐射对束流发射度、能散及包络的影响。结果表明：空间电荷效应对发射度影响不大，但对束流包络影响较明显；相干同步辐射引起的发射度增长及能散较小，且不影响束流包络。     

在中国物理学会第7届全国会员代表大会上的工作报告(节选)

各位领导、各位代表、同志们：中国物理学会第７届全国会员代表大会今天开幕．在这里请允许我代表本届理事会向热情关怀、大力支持学会工作的各位领导和来宾,向为学会发展作出积极贡献的各位代表,表示热烈欢迎并致以崇高的敬意和衷心的感谢！向给予本次大会资助的单位—...     

第四代光源

 第四代光源（X射线激光）是继第三代同步辐射光源以后,人们正在探索之中的新一代光源,它在亮度、相干性和时间结构上都大大优于第三代同步辐射光源。从目前发展的趋势来看,新一代的短脉冲、高亮度、可调的相干X射线光源将是基于自放大自发辐射原理的高增益自由电子激光（SASE FEL）。综述了第四代光源的由来、它和SASE的关系, 它的优异特性、发展现状以及应用前景。     

实时离子探测器——塑料闪烁体性能的实验研究

利用静电离子加速器对实时离子探测器——塑料闪烁体的特性 (包括灵敏度、动态范围、能量响应, 及空间分辨等)进行了实验研究,并对闪烁体探测器与其他传统的离子探测器的特性进行了比较. 对闪烁体在激光等离子体实验的离子束诊断中的可能应用进行了探讨.塑料闪烁体的应用可满足高重复频率激光等离子体离子加速实验高效率运行的要求,为实验研究提供强有力的支持.