Seeded Polymerization of an Amide-Functionalized Diketopyrrolopyrrole Dye in Aqueous Media

The self-assembly of an amide-functionalized dithienyldiketopyrrolopyrrole (DPP) dye in aqueous media was achieved through seed-initiated supramolecular polymerization. Temperature- and time-dependent studies showed that the spontaneous polymerization of the DPP derivative was temporally delayed upon cooling the monomer solution in a methanol/water mixture. Theoretical calculations revealed that an amide-functionalized DPP derivative adopts an energetically favorable folded conformation in the presence of water molecules due to hydration. This conformational change is most likely responsible for the trapping of monomers in the initial stage of the cooperative supramolecular polymerization in aqueous media. However, the monomeric species can selectively interact with externally added fragmented aggregates as seeds through concerted π-stacking and hydrogen-bonding interactions. Consequently, the time course of the supramolecular polymerization and the morphology of the aggregated state can be controlled, and one-dimensional fibers that exhibit a J-aggregate-like bathochromically shifted absorption band can be obtained.     

Defect-Free Synthesis of a Fully π-Conjugated Helical Ladder Polymer and Resolution into a Pair of Enantiomeric Helical Ladders**

Fully π-conjugated ladder polymers with a spiral geometry represent a new class of helical polymers with great potential for organic nanodevices, but there is no precedent for an optically active helical ladder polymer totally composed of achiral units. We now report the defect-free synthesis and resolution of a fully π-conjugated helical ladder polymer with a rigid helical cavity, which has been achieved by quantitative and chemoselective acid-promoted alkyne benzannulations of a rationally designed, random-coil achiral polymer followed by chromatographic enantioseparation. Because of a sufficiently high helix-inversion barrier, the isolated excess one-handed helical ladder polymer with a degree of polymerization of more than 15 showed a strong circular dichroism with a dissymmetry factor of up to 1.7×10⁻² and is thermally stable, maintaining its optical activity in solution even at 100 °C, as well-supported by molecular dynamics simulation.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

Development of a laser-based measurement system for evaluation of the scraping workpiece quality

A laser-based measurement system for evaluation of the scraping workpiece quality that can eliminate contact-induced measurement errors and increase measurement accuracy is proposed. The laser-based measurement system comprises a light-scattering-type triangulation laser, a computer numerical control (CNC) machine tool, and an analog-to-digital (A/D) card. The triangulation laser measures the depth of the scraping spots and the CNC machine tool locates their position. The 3D data of the scraping workpiece is then drawn using the least squares method. Cast iron and Turcite workpieces can be measured. Five parameters of the scraping workpiece, namely peak points per square inch, percentage of points, distribution of heights of points or depth of surroundings, edge shape of the grooves, and flatness, can be evaluated. The scanning rate and sampling rate of the laser-based measurement system are 100 mm/s and 10 KHz, respectively. In the future, an appliance machine based on the proposed system will be designed for the on-line detection of scraping workpieces.     

Genotyping of exons 1 to 20 in Duchenne muscular dystrophy by universal multiplex PCR and short‐end capillary electrophoresis

One rapid CE method was established to diagnose Duchenne muscular dystrophy (DMD). DMD is a severe recessive inherited disorder frequently caused by gene deletions. Among them, exons 1–20 account for nearly 30% of occurrences. In this study, the universal multiplex PCR was used to enhance the fluorescently labeling efficiency, which was performed only by one universal fluorescent primer. After PCR, a short‐end injection CE (short‐end CE) speeded up the genotyping of the DMD gene. This method involved no extra purification, and was completed within 9 min. The CE conditions contained a polymer solution of 1.5% hydroxylethylcellulose in 1× TBE buffer at 6 kV for separation. This method was applied to test six DMD patients and one healthy male person. The results showed good agreement with those of multiplex ligation‐dependent probe amplification. This method can be applied for clinical diagnosis of DMD disease. Accurate diagnosis of the DMD gene is the best way to prevent the disease.     

Study of temperature distribution of sliding block with asperity surface

In this study, a numerical thermal model is developed for sliding block contact under various loads, sliding velocities and surface roughness. The temperature distributions are shown for perfectly insulated thermal conditions along noncontact surfaces. For a particular five‐peaks contact model, the maximum temperature at the central peak is slightly lhigher than the others. The temperature profile decreases as the distance to the symmetry axis increases, and then decreases dramatically at the noncontact area. It is clear to see that the maximum temperature locates at the symmetry central peak of the asperity contact area instead of the leading head of the smooth surface. The maximum temperature rise parameter increases as the pressure, sliding velocity and asperity roughness increased or conductivity decreased. This phenomenon becomes obvious for cases at high pressure, velocity and roughness and low conductivity. Particularly, the influence of roughness is not significant for low velocity. Similar results are found for the maximum temperature rise parameter difference between peaks or peaks/valleys. The simulation results of this asperity surface sliding block contact model are able to provide essential information for the components of microelectro—mechanical systems (MEMS) and biochemical reaction mechanism. Copyright © 2011 John Wiley & Sons, Ltd.     

The inhibition profiles of 4'-acylpyrrole–5-fluoroindolin-2-ones with a C-3' side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases

In this study, we reported the inhibition profiles of 4′-acylpyrrole–5-fluoroindolin-2-one 3 with a C-3′ side chain for VEGFR2, PDGFR-β, and FGFR-1 protein kinases. The pyrrole-fused cyclohexanone moiety provided 3 with the best potency to inhibit the three kinases, and the C-3′ side chains contributed to the different inhibition profiles of 3 . Compound 3b with a C-3′ 2-carboxylethyl side chain showed good potency for the three kinase (IC₅₀: 25–260 nM), and compound 3g with a N,N-dialkyl-2-carbamoylethyl side chain was more active for VEGFR2 (IC₅₀: 59 nM) and PDGFR-β (IC₅₀: 16 nM) than FGFR-1 (IC₅₀: 1.7 μM). The C-3′ 3-(dialkylamino)propyl side chain accomplished 3h – j as selective PDGFR-β inhibitors (IC₅₀: 7.8–13 nM). Compound 3b was further investigated and found potent to inhibit VEGF- and FGF-dependent cell proliferation with moderate in vivo anticancer activity. Results from docking simulations revealed that the interactions of 3b with VEGFR2 and FGFR-1 which could account for the different inhibition profiles of 3 .     

3,6‐Bis(2‐pyridyl)di‐1,2,4‐triazolo­[3,4‐a:4′,3′‐c]­phthalazine

The title compound, C₂₀H₁₂N₈, (I), has been prepared by the reaction of 1,4‐dihydrazinophthalazine and pyridine‐2‐carbox­aldehyde, followed by an oxidative cyclization by treatment with bromine. In the solid state, the mol­ecules of (I) are discrete, comprising a fused and twisted four‐ring system with an overall helical appearance. The distance between the two intramolecular pyridyl N atoms is 3.075 (2) Å, this short contact distance suggesting a π–π interaction.     

Non-steady state solidification of the Nd-123 superconducting oxides

Crystal growth of the melt-textured bulk Nd_1+xBa_2−xCu₃O_6+d (Nd123) superconducting oxides was investigated by employing isothermal undercooling solidification with hot-seeding in air. From the relationship between growth length and holding time, the Nd123 crystal was found to have almost stopped growing after a certain growth period, while the growth length increased proportionally to the holding time at an early stage of the crystal growth. As a result of quantitative analysis for the Nd123 crystal of which solidification was terminated, the distribution of the Nd/Ba substitution was observed to decrease in the Nd123 single crystal matrix from the seed crystal to the edge of the Nd123 crystals. Also, the substitution content at the edge of the Nd123 crystal, which corresponds to that at the final stage of the crystal growth, was found to be in good agreement with the minimum substitution of the Nd123 solid solution phase in the equilibrium phase diagram at this process temperature. These compositional changes could be explained using the equilibrium phase diagram as associated with the solid solution formation, which is responsible for the non-steady state solidification of the Nd123 crystals even for the isothermal undercooling processing.     

Irciformonins E – K,C22‐Trinorsesterterpenoids from the Sponge Ircinia formosana

Chemical investigation of the sponge Ircinia formosana resulted in the isolation of seven new linear C₂₂‐sesterterpenoids, irciformonins E–K ( 1 – 7 ) in addition to irciformonin A ( 8 ), a previously isolated furanosesterterpenoid (=a furan‐moiety‐containing sesterterpenoid) from the same species. The structures were determined by interpretation of HR‐ESI‐MS and 2D‐NMR spectra. The structure of irciformonin A ( 8 ) was revised. Compound 5 exhibited significant inhibition of peripheral blood mononuclear cell proliferation induced by phytohemaglutinin.