A novel method for determination of inorganic oxyanions by electrospray ionization mass spectrometry using dehydration reactions

Novel methods for the determination of inorganic oxyanions by electrospray (ES) ionization mass spectrometry have been developed using dehydration reactions between oxyanions and carboxylic acids at the ES interface. Twelve oxyanions (VO₃^?, CrO₄^2?, MoO₄^2?, WO₄^2?, BO₃^3?, SiO₃^2?, SiO₄^4?, AsO₄^4?, AsO₂^?, SeO₄^2?, SeO₃^2? and NO₂^?), out of 16 tested, reacted with at least one of four aminopolycarboxylic acids, i.e. iminodiacetic acid (IDA), nitrilotriacetic acid (NTA), trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid and triethylenetetramine‐N,N,N′,N″,N′″,N′″‐hexaacetic acid, at the ES interface to produce the dehydration products that gave intense mass ion responses, sufficient for trace analysis. As examples, trace determinations of Cr^VI and silica in water samples were achieved after online ion exchange chromatography, where the dehydration product of CrO₄^2? and NTA (m/z 290) and that of SiO₄^4? and IDA (m/z 192) were measured. The limits of detection of the respective methods were 17 nM (0.83 ng Cr/ml) for Cr^VI and 0.17 μM (4.8 ng Si/mL) for SiO₄^4?. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparison of CO2 Reduction Performance with NH3 and H2O between Cu/TiO2 and Pd/TiO2

The aim of this study is to clarify the effect of doped metal type on CO₂ reduction characteristics of TiO₂ with NH₃ and H₂O. Cu and Pd have been selected as dopants for TiO₂. In addition, the impact of molar ratio of CO₂ to reductants NH₃ and H₂O has been investigated. A TiO₂ photocatalyst was prepared by a sol-gel and dip-coating process, and then doped with Cu or Pd fine particles by using the pulse arc plasma gun method. The prepared Cu/TiO₂ film and Pd/TiO₂ film were characterized by SEM, EPMA, TEM, STEM, EDX, EDS and EELS. This study also has investigated the performance of CO₂ reduction under the illumination condition of Xe lamp with or without ultraviolet (UV) light. As a result, it is revealed that the CO₂ reduction performance with Cu/TiO₂ under the illumination condition of Xe lamp with UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:1:1 while that without UV light is the highest when the molar ratio of CO₂/NH₃/H₂O = 1:0.5:0.5. It is revealed that the CO₂ reduction performance of Pd/TiO₂ is the highest for the molar ratio of CO₂/NH₃/H₂O = 1:1:1 no matter the used Xe lamp was with or without UV light. The molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp with UV light was 10.2 μmol/g, while that for Pd/TiO₂ was 5.5 μmol/g. Meanwhile, the molar quantity of CO per unit weight of photocatalyst for Cu/TiO₂ produced under the illumination condition of Xe lamp without UV light was 2.5 μmol/g, while that for Pd/TiO₂ was 3.5 μmol/g. This study has concluded that Cu/TiO₂ is superior to Pd/TiO₂ from the viewpoint of the molar quantity of CO per unit weight of photocatalyst as well as the quantum efficiency.     

Multicomponent Self‐Assembly with a Shape‐Persistent N‐Heterotriangulene Macrocycle on Au(111)

Multicomponent network formation by using a shape‐persistent macrocycle ( MC6 ) at the interface between an organic liquid and Au(111) surface is demonstrated. MC6 serves as a versatile building block that can be coadsorbed with a variety of organic molecules based on different types of noncovalent interactions at the liquid–solid interface. Scanning tunneling microscopy (STM) reveals the formation of crystalline bicomponent networks upon codeposition of MC6 with aromatic molecules, such as fullerene (C₆₀) and coronene. Tetracyanoquinodimethane, on the other hand, was found to induce disorder into the MC6 networks by adsorbing on the rim of the macrocycle. Immobilization of MC6 itself was studied in two different noncovalently assembled host networks. MC6 assumed a rather passive role as a guest and simply occupied the host cavities in one network, whereas it induced a structural transition in the other. Finally, the central cavity of MC6 was used to capture C₆₀ in a complex three‐component system. Precise immobilization of organic molecules at discrete locations within multicomponent networks, as demonstrated here, constitutes an important step towards bottom‐up fabrication of functional surface‐based nanostructures.     

Surface modification for nano‐lignocellulose fiber through vapor‐phase‐assisted surface polymerization

This study addresses the inherent issues surrounding surface modification methods of nanofibers and proposes an environmentally friendly and less toxic strategy for the surface modification of hydrophilic nanofiber. From the continuation of our previous work, which discussed the easy production of nanofiber (average size: 127 nm) from oil palm mesocarp fiber (OPMF), in this work, the surface of nanofibers (M‐IL‐OPMF) were modified through vapor‐phase‐assisted surface polymerization (VASP) to improve the affinity of interface between the polymer grafted M‐IL‐OPMF and non‐polar matrix. VASP of ε‐caprolactone was successfully proceeded from the [M‐IL‐OPMF] at 70 °C for 24 h and 72 h, and compositions were estimated to be 35.7% fiber/64.3% polymer and 27.8% fiber/72.2% polymer. To confirm the grafting of PCL, size‐exclusion chromatography (SEC) and Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetry (TG), and dispersibility test in hydrophobic solvent were carried out. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2575–2580     

Syntheses and Properties of Graphyne Fragments: Trigonally Expanded Dehydrobenzo[12]annulenes

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis‐DBAs). Intramolecular three‐fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner’s Mo catalyst furnished tetrakis‐DBAs 8 a and 8 b substituted with tert‐butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c – g have also been prepared. The one‐photon absorption spectrum of tetrakis‐DBA 8 a bearing tert‐butyl groups revealed a remarkable bathochromic shift of the absorption cut‐off (λ_cutoff) compared with those of previously reported graphyne fragments due to extended π‐conjugation. Moreover, in the two‐photon absorption spectrum, 8 a showed a large cross‐section for a pure hydrocarbon because of the planar para‐phenylene‐ethynylene conjugation pathways. Hexakis(arylethynyl)‐DBAs 9 c – e and 9 g and tetrakis‐DBA 8 b bearing electron‐withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π–π interactions between the extended π‐cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time‐resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge‐carrier mobility of 0.12 cm² V^?1 s^?1. These results indicate that large graphyne fragments can serve as good organic semiconductors.     

Interlaboratory comparison for the determination of pesticide residues in Chinese cabbage

The results of and findings from an interlaboratory comparison among laboratories carrying out food testing of pesticide residues in the APEC (Asia–Pacific Economic Cooperation) region are presented and discussed to show critical roles of chemical metrology infrastructure in establishing traceability of measurements and in supporting existing measurement capability in safety and quality of food trade. The study material, which was prepared and certified by Korea Research Institute of Standards and Science (KRISS), was freeze-dried Chinese cabbage powder fortified with two organophosphorous pesticides (diazinon and chlorpyrifos). Among 14 participants, 12 laboratories were accredited based on ISO/IEC17025 and one laboratory was under assessment for the accreditation at the time of this study. Though all participants demonstrated very good intra-day repeatability and inter-day intermediate precision, many of them showed a large bias from the certified values. It is suggested that in addition to the accreditation system, economies are encouraged to develop appropriate chemical metrology infrastructure, which could effectively support laboratories to assure measurement traceability to SI, for which NMIs could play significant roles through their metrological services recognized in Mutual Recognition Arrangement (MRA) of the International Committee for Weights and Measures (Comité International des Poids et Mesures, CIPM).     

[2.2.2.2](2,7)‐1‐Bromonaphthalenophane from a Desymmetrized Building Block Bearing Electrophilic and Masked Nucleophilic Functionalities

In search of 2,7‐ethylene‐bridged naphthalenophanes with desymmetrized naphthalene cores as inherently chiral cyclophanes, nucleophilic substitution of 1‐bromo‐7‐(bromomethyl)‐2‐[(trimethylsilyl)methyl]naphthalene, a desymmetrized building block bearing an electrophilic group (CH₂Br) and a masked nucleophilic functionality (CH₂TMS) which can be activated by fluoride anion, was examined. As a result, in contrast to the case of parent naphthalenophanes wherein the smallest [2.2]naphthalenophane was obtained as the major product, only [2.2.2.2](2,7)‐1‐bromonaphthalenophane was obtained albeit in low yields, whereas the corresponding [2.2]‐ or [2.2.2]naphthalenophanes were not obtained. Though the [2.2.2.2]‐1‐bromonaphthalenophane can adopt four idealized geometries of different symmetry, among which three are inherently chiral, theoretical calculations predict that three conformers have almost equal energy and may equilibrate in solution. The X‐ray crystallographic study shows that it adopts a C₂ conformation with anti,anti,anti orientation of the C?Br bonds at least as a major component in crystal.