Catalytic Asymmetric Syntheses of Alkylidenecyclopropanes from Allenoates with Donor-Acceptor and Diacceptor Diazo Reagents

The first diastereo- and enantioselective cyclopropanation reactions of electron-deficient allenes with donor-acceptor and diacceptor diazo reagents are described. The desired enantioenriched alkylidenecyclopropanes (ACPs) were obtained in high yields with high diastereo- and enantioselectivities in the presence of Rh₂((S)-TCPTAD)₄ or Rh₂((R)-BTPCP)₄ catalysts (up to 95 % yield, >95 : 5 d.r. and 99 : 1 e.r.). This methodology gave a direct access to ACPs bearing multiple electron-deficient substituents and allows to further expand the availability of ACPs chemistry. Interestingly, during the examination of the scope of this reaction, the asymmetric intramolecular C−H insertion reaction into tert-butyl group was observed as a side reaction with up to 94 : 6 e.r.     

Enhanced Operational Durability of Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes with a Triazine Electron Transporter

In organic light-emitting diodes (OLEDs) based on materials that show thermally activated delayed fluorescence (TADF), the internal quantum efficiency of 100 % can be obtained without using phosphorescence-based organometallics that contain rare metals. Therefore, with TADF-based emitters, it is possible to fabricate high-performing OLEDs at a lower cost. However, compared with fluorescence- and phosphorescence-based OLEDs, an understanding of degradation mechanisms in TADF-based OLEDs is still insufficient for future commercialization. In particular, it is widely recognized that the development of electron transport materials is crucial for improving OLED characteristics, especially driving voltages and operational durability. In this study, it was demonstrated that the operational durability of TADF-based OLEDs was greatly improved by introducing a triazine-based material of 2,4,6-tris(1,1′-biphenyl-4-yl)-[1,3,5]triazine (pT2T) as a hole-blocking layer (HBL) compared with a conventional HBL material of 2,4,6-tris(biphenyl-3-yl)-[1,3,5]triazine (T2T). Several experiments were carried out to make the reasons of the improved durability clearer, and attributed the improved durability to the shift of a carrier recombination zone from the emitting layer/HBL interface and the suppressed formation of excited-state quenchers in the pT2T HBL, because of the higher electron mobility of pT2T and the better stability of its radical anion state.     

Host–Guest Complexation of Perethylated Pillar[5]arene with Alkanes in the Crystal State

Activated perethylated pillar[5]arene crystals show an unexpected alkane‐shape‐ and ‐length‐selective gate‐opening behavior. Activated crystals were obtained upon removing solvents from perethylated pillar[5]arene crystals by heating. The activated crystals could quantitatively take up n‐alkanes with carbon chains containing more than five carbon atoms as a consequence of their gate‐opening pressure. As the chain length of the n‐alkanes increased, the gate pressure decreased. A transformation into a herringbone structure was induced when n‐hexane was used as a guest. By contrast, cyclic and branched alkanes were not taken up and could not induce a crystal transformation because they were too large to fit in the cavities of the pillar[5]arene. Alkane‐shape‐selective molecular recognition of pillar[5]arenes in the solution state was translated into the vapor/crystal state.     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

Effect of preparation process of microfibrillated cellulose-reinforced polypropylene upon dispersion and mechanical properties

Microfibrillated cellulose (MFC)-reinforced polypropylene (PP) was prepared via two engineering approaches: disintegration of the pulp by a bead mill followed by a melt-compounding process with PP (B-MFC-reinforced PP); and disintegration of the pulp mixed with PP by a twin screw extruder followed by a melt-compounding process (T-MFC-reinforced PP). The effects that the engineering process and the microfibrillation of the pulp had upon the dispersion and mechanical properties were investigated through tensile tests, rheological analysis and X-ray computed tomography. The bead-milling method enabled a uniform microfibrillation of the pulp to under 100 nm, which corresponded to a surface area of 133–146 m²/g for the pulp, found by the Brunauer–Emmett–Teller (BET) analysis. The T-MFC-reinforced PP with 30 wt% MFC content exhibited a tensile modulus of 5.3 GPa and a strength of 85 MPa, whereas the B-MFC-reinforced PP composites with the same content of MFC exhibited values of 4.1 GPa and 59.6 MPa, respectively. Rheological analysis revealed that the complex viscosity and storage modulus at 170 °C of T-MFC-reinforced PP with 30 wt% MFC content are 5–7 and 5–8 times higher than that of B-MFC-reinforced PP, respectively. This indicated that T-MFC was more dispersed in the PP than B-MFC. Therefore, T-MFC produced a more rigid interconnected network in the matrix during the melting state than B-MFC.     

Synthesis of a Hematoside Analog Containing Phytosphingosine and α-Hydroxyfatty Acid

Abstract

The hematoside analog 1 [NeuGcα(2→3)Galβ(1→4)Glcβ(1→1)Cer], which contains a phytosphingosine as a sphingoid base and an α-hydroxyfatty acid, has been synthesized. Coupling of the methyl (methyl 5-benzyloxyacetamido-4,7,8,9-tetra-O-acetyl-3,5-dideoxy-2-thio-D-glycero-α- and -β-D-galacto-2-nonulopyranosid)onate 5, prepared from the corresponding 5-acetamido derivative 2, with a lactose derivative 6 afforded sialolactoside 7, which was converted to the corresponding trichloroacetimidate 10. Glycosylation of 10 with the ceramide tribenzoate 12 gave the protected hematoside analog 13, which was deprotected to the hematoside analog 1.     

Radical polymerization of trifluoromethyl‐substituted methyl methacrylates and their application for use in pressure‐sensitive paint

Three CF₃‐substituted methyl methacrylates (MMAs), 2,2,2‐trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIPMA) and nonafluoro‐tert‐butyl methacrylate (NFTBMA), were polymerized by conventional radical polymerization to give oxygen‐permeable polymers for application in pressure‐sensitive paint (PSP). The radical copolymerizations of styrene with TFEMA, HFIPMA, or NFTBMA were carried out to examine the effect of CF₃ groups on the polymerizability. The e values increased in the order of MMA (0.40) < TFEMA (0.76) < HFIPMA (1.19) < NFTBMA (1.31). The homopolymers of TFEMA, HFIPMA and NFTBMA (PTFEMA, PHFIPMA, and PNFTBM, respectively) were examined as polymers for use in PSP using 5,10,15,20‐tetrakis(pentafluorophenyl)porphinato platinum(II) (PtTFPP). The PSP consisting of PNFTBMA and PtTFPP exerted very high pressure sensitivity and very low temperature sensitivity. In the absence of oxygen, the temperature sensitivity decreased in the order of PTFEMA > PHFIPMA > PNFTBMA = PMMA, which corresponds to the order of glass transition temperatures (T_g). However, the activation energies of the overall process of the luminescence quenching by oxygen were found to be 16.8 (PMMA), 13.0 (PTFEMA), 6.8 (PHFIPMA), and 4.3 kJ mol^?1 (PNFTBMA). Therefore, the low temperature sensitivity of PNFTBMA was attributed to its high degree of substitution with CF₃ groups and to its relatively high T_g value. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 963–972     

Synthesis of ZrO<Subscript>2</Subscript> nanoparticles for liquid scintillators used in the detection of neutrinoless double beta decay

We synthesized liquid scintillators incorporating ZrO₂ nanoparticles for application in neutrinoless double beta decay experiments. ZrO₂ nanoparticles of less than 10 nm in size were synthesized with sub- and supercritical hydrothermal methods. The Zr concentrations in the liquid scintillators were determined to be up to 1.4 wt% with inductively coupled plasma analysis, and the liquid scintillators were transparent to scintillation. These results indicate that these methods are applicable for the preparation of liquid scintillators for neutrinoless double beta decay experiments.