TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

Molecularly imprinted polymers on the surface of silica microspheres via sol‐gel method for the selective extraction of streptomycin in aqueous samples

Streptomycin‐imprinted silica microspheres were prepared by combining a surface molecular‐imprinting technique with the sol‐gel method. A mixture of tetrahydrofuran, ethanol, and water (6:1:1, v/v/v) was selected as dispersing solvent while 3‐aminopropyltriethoxysilane and triethoxyphenylsilane acted as functional monomers, and tetraethyl orthosilicate as a cross‐linker. Characterization of the molecularly imprinted polymers was conducted using scanning electron microscope and dynamic binding experiments. As compared to the nonimprinted polymers, the imprinted polymers exhibited a higher degree of saturated adsorption volume up to 26.3 mg/g, and better selectivity even in an aqueous solution with interfering compounds, including dihydrostreptomycin, neomycin, and tetracycline. The adsorption ability and selectivity were observed to be influenced by the mole ratio of 3‐aminopropyltriethoxysilane and triethoxyphenylsilane. Feasibility of the polymers to be used for actual application was also evaluated with spiked samples, indicating great potential for large‐scale applications. Moreover, the streptomycin‐imprinted polymers can be repeatedly used for 12 cycles without losing original performance, which is beneficial for commercial use.     

水热反应条件对多孔球状Bi2WO6光催化剂结构及性能的影响

采用水热法制备了Bi₂WO₆光催化剂, 考察了水热反应温度、 水热反应时间及前驱体溶液pH值等条件对其对乙烯可见光催化活性的影响, 并通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 紫外-可见漫反射光谱(UV-Vis DRS)和比表面积分析等对催化剂的晶相组成、 微观形貌和光学性质等进行表征. 结果表明, 在水热反应温度为120 ℃、 水热反应时间为12 h、 前驱体溶液pH=0.5条件下, Bi₂WO₆光催化剂经过各向异性生长以及自组装奥斯特瓦尔德成熟(Ostwald ripening)过程, 形成由二维纳米薄片自组装的多孔微球状结构, 有效增大了与乙烯气体的接触面积, 禁带宽度降至2.86 eV, 可见光响应范围拓宽, 表现出优异的光催化性能, 在可见光下240 min内对乙烯的降解率达到13.69%.     

同步辐射显微红外光谱法应用于杜仲的研究

同步辐射显微红外光谱具有高亮度、高信噪比等优势.应用同步辐射显微红外光谱对于中药进行研究,可以进行微区分析,从而更加深入了解中药的组成.应用同步辐射显微红外光谱对于杜仲的冰冻切片进行研究,采集不同微区的一系列红外光谱;同时对选定区域进行化学成像,进一步研究该区域中化学组成的分布,从而对于杜仲红外光谱中各个峰的归属有深入...     

幽门螺杆菌相关性的十二指肠溃疡与发锌关系研究

６８例幽门螺杆菌（ＨＰ）相关性的十二指肠溃疡（ＤＵ）患者的发锌明显低于对照（Ｐ〈０．０１），缺锌与ＨＰ相关性的ＤＵ密切相关，因此发锌作为一种检测方法和在治疗上作为补锌的依据具有一定的临床意义。     

Fourier级数子列的可和性

Let H_α0^ω denote the set of functions f(x)∈L_2π such that ω(f,x₀;t)≤ω(t),ω(t) being a given modulus of continuity. Let {n_k} be a set of natural numbers satisfying the condition n_i+1/n_k>q>1, and let A= (α_πk) be a regular summation matrix.     

Rapid Simultaneous Determination of Volatile Organic Compounds in Mattress Fabric by Headspace–Gas Chromatography–Mass Spectrometry

An analytical method for simultaneously determining 32 volatile organic compounds in mattress fabrics based on static headspace coupled to gas chromatography and mass spectrometry detection was established. Samples were cut into 5?×?5?mm small pieces and placed in a 20?mL headspace vial at 90° for 30?min. To achieve the optimum conditions for the analysis, several parameters including the heating temperature, heating time, sample weight, and injection time were investigated. The results demonstrated that the most important parameter influencing the sensitivity of the analysis was the heating temperature. The optimum method showed good linearities with correlation coefficients ranged from 0.9944 to 0.9998. The limits of detection and quantification for the target compounds were in the ranges of 0.004–0.032 and 0.013–0.099?µg/?g, respectively. The method was successfully applied to determine the volatile organic compounds in six categories of mattress fabrics. The results showed that some volatile organic compounds were found, such as naphthalene, hexadecane, and 1,4-diisopropylbenzene. Moreover, the concentrations of 32 volatile organic compounds decreased following the order of jute, terylene, polyester, velboa, nylon, and cotton samples in the study. These results indicated that the method is fast, accurate, and successful for determining volatile organic compounds in mattress fabrics.