Methods for detection of point mutations: performance and quality assessment. The IFCC Scientific Division, Committee on Molecular Biology Techniques.

We give an overview of current methods for the detection of point mutations as well as small insertions and deletions in clinical diagnostics. For each method, the following characteristics are specified: (a) principle, (b) major modifications, (c) maximum fragment size that can be analyzed, (d) ratio and type of mutations that can be detected (e) minimum ratio of mutant to wild-type alleles at which mutations can be detected, and (j) detection methods. Special attention is paid to the possibilities of quality assessment and the potential for standardization and automation.     

Thermally reversible polymer linkages. II. Linear addition polymers

The stepwise addition polymerization reactions of bisazlactones [bis(2-oxazolin-5-one)s] and a variety of 4,4′-bisphenols have been studied for the purpose of making thermally reversible linear polymers. Thus polymerization occurs at or near room temperature, while depolymerization yielding the two monomer species occurs at elevated temperatures. The synthesis of oligomers in solution without the use of catalyst occurs for the reaction of bisazlactones with bisphenols containing an electron-withdrawing moiety between the two phenol groups of the bisphenol. These oligomers regenerate the bisphenol and bisazlactone monomers upon heating to 165–200°C for several hours under dry box conditions. In many cases, these reactions follow the same patterns of reactivity observed in model studies. This chemistry may be useful for forming degradable or recyclable polymers, where shortchain prepolymers, or macromonomers, endcapped with azlactone and phenol moieties could be used to form high molecular weight polymers that are thermoreversible. Such a reaction system might also be used for preventing reactions of bisphenols and/or bisazlactones at low temperatures, with the desired reaction initiated by formation of the reactive species at elevated temperatures. Envisioned uses in this case might be thermally triggered crosslinking or polymerization reactions, or temperature controlled drug release. © 1993 John Wiley & Sons, Inc.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

Mechanistic studies of chelating resins using two-phase potentiometry

The elucidation of metal ion binding mechanisms with chelating resins by treating the resin as a collection of monomeric units is an established approach. In this paper, this approach is used to treat data obtained from two-phase potentiometric titrations by the programme ESTA. Apparent protonation and formation constants could be calculated. From these, species distribution plots could be obtained. These, in turn, allowed the calculation of the more familiar distribution ratios. The method was tested on Fe(III) and Nd(III) bonding with the iminodiacetate functionalized resin, Chelex 100; and Ca(II) bonding to the aminomethylphosphonate functionalized resin, Purolite S940. Good results were obtained indicating the applicability of this method. Comparisons with the literature are made.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Synthesis and thermal crosslinking of carbosiloxane and oligo(oxyethylene) polymers

Acyclic diene metathesis (ADMET) polymerization has been used in the synthesis of telechelic materials using alkoxy‐functionalized carbosiloxane or oligo(oxyethylene)‐based polymers, varying from internal to terminal cured materials or the combination of them. Previous investigations demonstrated that introduction of chain‐end crosslinking improves the stress–strain behavior of such materials. A series of saturated and unsaturated carbosiloxane and oligo(oxyethylene)‐based polymers were synthesized by ADMET polymerization using silacyclobutane as chain‐end, thermally induced crosslinker. The carbosiloxane derivatives presented pure amorphous behavior, whereas the oligo(oxyethylene) polymers were semicrystalline. The thermal curing process was monitored by differential scanning calorimetry via the exotherm between 160 and 210 °C. Mechanical properties on thermoset polymers were measured, where cured polymers showed moduli from 0.6 to 9.3 MPa, tensile strengths from 0.3 to 1.0 MPa, and elongations from 12 to 76%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Physical fabrication of colloidal ZnO nanoparticles combining wet-grinding and laser fragmentation

Combination of wet-grinding and laser fragmentation is a promising approach to advance both methods: Laser fragmentation will be more efficient when combined with mechanical treatment and wet-grinding may take advance of the abrasion-free laser process to achieve fabrication of smaller particles. By mechanical pre-treatment of zinc oxide microparticles in a stirred-media mill, the starting material is activated by generation of crystallographic defects, which strongly enhance the efficiency of subsequent laser fragmentation. Picosecond-laser irradiation of mechanically treated and untreated microparticles suspended in water yielded in colloidal zinc oxide nanoparticles. Furthermore, nanoparticle productivity and properties can be controlled by variation of anionic surfactant concentration.     

Magtrieve™: a convenient catalyst for the oxidation of alcohols

We find that Magtrieve™ (CrO₂) catalyzes the oxidation of a wide variety of alcohols with periodic acid as the terminal oxidant. Mild conditions, short reaction times, and facile aqueous work-up make this a most attractive method. Olefins are not oxidized under these conditions; thus alcohols react selectively in the presence of alkenes. Conditions have been optimized with respect to catalyst loading, solvent, and co-oxidant; and the scope of the reaction includes primary and secondary benzylic, allylic, and aliphatic alcohols.