Rotating Detonation Combustor Research at the University of Cincinnati

Rotating detonation combustors (RDC) are at the forefront of pressure gain combustion (PGC) research. The simplicity in design and the ease of assembly makes it a promising technology that could be integrated into existing combustor architectures. This is, however, coupled with the considerable complexities of the detonation-based flow field, and the associated modes and coupling mechanisms. The current paper is an overview of the research done at the University of Cincinnati to address some of the challenges and questions pertaining to the physics of RDC operation. Issues such as combustor geometry, injection schemes and mixing, varied reactants behavior and modes of RDC operation are discussed. The effects of pressurization of the combustor, along with other detonation enhancement strategies are also deliberated upon. When appropriate, parallels are drawn to the phenomena of high frequency combustion instabilities to address the similarities in observations between the two fields.     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Is it True That the Normal Valence‐Length Correlation Is Irrelevant for Metal–Metal Bonds?

The most intriguing feature of metal–metal bonds in inorganic compounds is an apparent lack of correlation between the bond order and the bond length. In this study, we combine a variety of literature data obtained by quantum chemistry and our results based on the empirical bond valence model (BVM), to confirm for the first time the existence of a normal exponential correlation between the effective bond order (EBO) and the length of the metal–metal bonds. The difference between the EBO and the formal bond order is attributed to steric conflict between the (TM)_n cluster (TM=transition metal) and its environment. This conflict, affected mainly by structural type, should cause high lattice strains, but electron redistribution around TM atoms, evident from the BVM calculations, results in a full or partial strain relaxation.     

[HDBU][HSO4]-catalyzed facile synthesis of new 1,2,3-triazole-tethered 2,3-dihydroquinazolin-4[1H]-one derivatives and their DPPH radical scavenging activity

Research on Chemical Intermediates - A simple and efficient protocol has been developed for the synthesis of new1,2,3-triazole-2,3-dihydroquinazolin-4[1H]-one (DHQ) conjugates(6a?j) via...     

Synthesis of polymer-supported Brønsted acid-functionalized Zn–porphyrin complex,knotted with benzimidazolium moiety for photodegradation of azo dyes under visible-light irradiation

Research on Chemical Intermediates - A polymer-supported Brønsted acid-functionalized Zn–porphyrin complex, knotted with benzimidazolium moiety (PSBAZnPP), has been synthesized and...     

Gold-Catalyzed Oxidative Aminocyclizations of Propargyl Alcohols and Propargyl Amines to Form Two Distinct Azacyclic Products: Carbene Formation versus a 3,3-Sigmatropic Shift of an Initial Intermediate

Gold-catalyzed oxidations of propargyl alcohols with nitrones by using a P(tBu)₂(o-biphenyl)Au⁺ catalyst, afforded bicyclic annulation products from the Mannich reactions of gold enolates. The same reactions of propargyl amines with nitrones by using the same gold catalyst gave distinct oxoarylation products. Our DFT calculations indicate that oxidation of propargyl alcohols with nitrones by using electron-rich gold catalysts lead only to gold carbenes, which can generate gold enolates or oxoarylation intermediates with enolate species having a barrier smaller than that of oxoarylation species.     

Ratiometric Probe for Rapid Naked Eye Detection of Toxic Hydrazine: Real Time Application in Strip Test,Spray Test and Soil Analysis

Journal of Fluorescence - Striking colorimetric probe (CynH) for abrupt detection of hydrazine under complete aqueous solution was achieved. The water soluble probe was designed with electron...     

Role of Cu-doping in CdTe thin films: Experiments and simulations

Due to its outstanding physical properties, CdTe is used to fabricate high efficiency solar cells. However, its high work function poses a challenge, and hence, to fabricate an efficient CdTe-based solar cell, Cu-doping may be useful. Here, we present the role of temperature-dependent Cu-doping in radio frequency sputter-deposited CdTe films and the related changes occurring in their optical, electrical, structural and microstructural properties. For instance, Cu-doping at different temperatures leads to an increase in the grain size and a reduction in the optical reflectance with increasing temperature. In addition, Kelvin probe force microscopy measurements reveal that the work function is found to be smaller corresponding to the annealing temperature of 473 K, whereas resistivity measurements show that it decreases with increasing temperature (the lowest value of resistivity is found to be 1.8 × 10⁻² Ω-cm). To understand the electronic structure of CdTe before and after Cu-doping, we have carried out first-principles density functional theory (DFT) simulation, which reveals a strong hybridization among Cu, Cd and Te atoms. This study paves the way to fabricate efficient Cu-doped CdTe-based solar cells.     

A Ferroelectric Aminophosphonium Cyanoferrate with a Large Electrostrictive Coefficient as a Piezoelectric Nanogenerator

Hybrid materials possessing piezo- and ferroelectric properties emerge as excellent alternatives to conventional piezoceramics due to their merits of facile synthesis, lightweight nature, ease of fabrication and mechanical flexibility. Inspired by the structural stability of aminophosphonium compounds, here we report the first A₃BX₆ type cyanometallate [Ph₂(ⁱPrNH)₂P]₃[Fe(CN)₆] ( 1 ), which shows a ferroelectric saturation polarization (P_s) of 3.71 μC cm⁻². Compound 1 exhibits a high electrostrictive coefficient (Q₃₃) of 0.73 m⁴ C⁻², far exceeding those of piezoceramics (0.034–0.096 m⁴ C⁻²). Piezoresponse force microscopy (PFM) analysis demonstrates the polarization switching and domain structure of 1 further confirming its ferroelectric nature. Furthermore, thermoplastic polyurethane (TPU) polymer composite films of 1 were prepared and employed as piezoelectric nanogenerators. Notably, the 15 wt % 1 -TPU device gave a maximum output voltage of 13.57 V and a power density of 6.03 μW cm⁻².