On additives, morphological evolution and dielectric breakdown in low density polyethylene

A series of low density polyethylene systems has been studied with respect to structural evolution and short-term dielectric breakdown behaviour. All materials were based upon a single polymer, that is commonly used in high voltage applications, but with different additives. In all three of these systems, multiple melting transitions were observed, as a result of molecular fractionation effects during crystallization. In the virgin polymer, a space-filling banded spherulitic morphology was found to develop at low temperatures (102 °C and below) whereas, at higher temperatures, only a few isolated axialites were observed. Inclusion of the antioxidant resulted in greatly increased nucleation densities, such that, at low temperatures, no evidence of spherulitic organisation remained. At higher temperatures, sheaf-like lamellar aggregates developed, which were much smaller and much more numerous than in the case of the virgin polymer. Further addition of dicumyl peroxide (DCP) resulted in the rapid formation of a crosslinked network at 200 °C. Some crosslinking also occurred at 150 °C, but over a much longer timescale. Where extensive crosslinking occurred prior to crystallization, the resulting gel inhibited structural development, such that only a few small, isolated sheaves were able to form at 102 °C. In view of the principal application area of this material, the breakdown strength of each of the above systems was then measured and the whole data set was analysed statistically. When structural factors were considered alongside the statistics, no clear trends emerged to indicate that either the compositional or morphological variations were reflected in the short-term electrical failure processes.     

Reactivity of 3-alkyl-4-arylazomethylene-3,4-dihydro-1,2,3-benzotriazines in protic solvents: 1,4-Addition reactions and dimroth rearrangement

3-Alkyl-4-arylazomethylene-3,4-dihydro-1,2,3-benzotriazines 5a and 5b undergo facile 1,4-addition of methanol or ethanol to afford stable crystalline hydrazones, 6 and 8 which have been characterised by spectroscopic analysis. In particular, the nmr spectrum of 8 shows novel features due to the diastereotopic nature of the CH₂ protons in the two O-ethyl groups. Compound 5b shows a property unique to the compounds in this series; refluxing this arylazomethylenetriazine in ethanol affords a rearranged product, characterised as the 1-aryl-2-cinnolinylhydrazine ( 9 ). The formation of 9 is rationalised as a ring opening-ring closure process analogous to the Dimroth rearrangement. The cinnoline 9 displays some novel chemistry arising from the facility of the arylhydrazino substituent to react with acid to give a fragmentation product, 3-methylindazole ( 7 ).     

A Model of the Perishable Inventory System With Reference to Consumer-Realized Product Expiration

A new model of the perishable inventory system is presented, which recognizes and incorporates the effects of consumer-realized product expiration. Such expiration has not been explicitly treated within the perishable inventory literature, and occurs when units are expired at the time of sale or expire within some short period of time subsequent to purchase. The model treats the age at which the vendor outdates units as a decision variable, and allows for analysis of the interaction between inventory ordering and outdate policy for a perishable item with random lifetime. As such, the model represents a synthesis of the fixed versus random lifetime perishable inventory literatures. Sensitivity analysis conducted with respect to the new model provides insight into the trade-offs between the costs of carrying, shortage, outdating, and consumer-realized product expiration.     

PHOTOSENSITIVITY IN THE SKIN OF THE LIZARD, Anolis carolinensis

Skin of the lizard, Anolis carolinensis, is remarkably sensitive to light. Illuminated in vitro with visible light from a tungsten source (110 W (m-2)), skin changes from brilliant green to dark brown (50% reduction in reflectance) within 2-4 min as a result of dispersion of melanin from a perinuclear position within dermal melanophores into superficial dendritic processes. Reversal of the process, reaggregation of pigment, will occur within 2.0 min upon return to darkness. This photic response can be initiated with light levels as low as 5.0 W m(-2) and is maximized by light levels only 5% that of midwinter sunshine. Pigment dispersion in response to both melanocyte simulating hormone and to light is inhibited by cytochalasin-B, indicating that microfilaments may be the motor element for pigment movement in that direction. Colchicine, but not cytochalasin-B, totally blocks pigment reaggregation following melanocyte stimulating hormone exposure and partially blocks it in the dark phase of the photic response. The results of this study are consistent with a model for pigment movement in A. carolinensis that provides microfilaments for pigment dispersion and microtubule involvement in both dispersion and aggregation. Finally, because it is readily visible, easily quantified, rapid and reversible, photic response in the skin of A. carolinensis is recommended as a valuable model system for the study of saltatory movement of organelles within cells.     

Dimethyldihydropyrene-dehydrobenzoannulene hybrids: studies in aromaticity and photoisomerization

The synthesis and study of dehydrobenzoannulene (DBA)-dimethyldihydropyrene (DDP) hybrids as models for the investigation of aromaticity in weakly diatropic systems is reported. Three new monofused DBA-DDP hybrids have been synthesized, and their NMR spectra are discussed with regard to quantifying the aromaticity remaining in multibenzene-fused DBAs. Nucleus-independent chemical shifts, determined at a series of locations for each compound, bond lengths, and (1)H and (13)C NMR chemical shifts were calculated and used to probe the aromaticity of these hybrids. Systems where more than one annulene/DBA is fused to the DDP core have also been obtained, and their potential use in photoinduced isomerization applications is discussed.     

Determination of nanomolar levels of formate in natural waters based on a luminescence enzymatic assay

A light-producing reaction utilizing three enzymes, bacterial luciferase, dehydrogenase and diaphorase, can be used to determine formic acid in natural waters at nanomolar concentrations. The method is rapid and convenient, requiring no preconcentration, desalting or derivatization procedures. Determinations can be done on small sample volumes (25 μl) at room temperature and pH 7. The precision (relative standard deviation for sea water samples containing 1.0 μM formate was 9.0% (n = 15). The reaction is specific for formate with a detection limit of 20 nM (signal-to-noise ratio = 3). Results for applications of the method to sea, estuarine and rain water are given.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

The chemical shift tensor for the hydroxyl proton: Ca(OH)2

The proton chemical shift tensor of the hydroxyl proton in calcium hydroxide has been measured using multiple pulse NMR techniques. The tensor is axially symmetric with susceptibility corrected components σ_tT = ?9.3 ± 1 ppm and

ppm relative to TMS. 792 79