Influence of the characteristics of soil and fly ash on the supercritical carbon dioxide extraction of dioxins.

Several investigations on the extraction of dioxins from soil and fly ash with supercritical fluid have been reported; however, few of them describe the influence of components on the extraction. We extracted dioxins from eight samples with different values of organic carbon content and surface area with supercritical CO(2) at a temperature of 463 K, a pressure of 40 MPa, and using 10% toluene as an entrainer. We researched the influence of the characteristics of soil and fly ash on supercritical CO(2) extraction of dioxins. The results revealed that the extraction efficiencies of PCDD/DFs and PCBs were high for all soil samples, while that of fly ash samples decreased with the increase in organic carbon content and surface area. The extraction efficiencies of dioxins from four standard samples, activated carbon, humic acid, alumina, and florisil, were also examined. The results revealed that the extraction efficiencies were strongly influenced by activated carbon like components present in the samples.     

Inner Radius of Univalence for a Strongly Starlike Domain

 The inner radius of univalence of a domain D with Poincaré density ρ _D is the possible largest number σ such that the condition ∥ S _f ∥ _D  = sup _{w∈ D} ρ _D (w) ⁻²∥ S _f (z) ∥ ≤ σ implies univalence of f for a nonconstant meromorphic function f on D, where S _f is the Schwarzian derivative of f. In this note, we give a lower bound of the inner radius of univalence for strongly starlike domains of order α in terms of the order α. The author was partially supported by the Ministry of Education, Grant-in-Aid for Encouragement of Young Scientists, 11740088. A part of this work was carried out during his visit to the University of Helsinki under the exchange programme of scientists between the Academy of Finland and the JSPS. Received November 26, 2001; in revised form September 24, 2002 Published online May 9, 2003     

Photoluminescence properties of trace amounts of Pr and Tb in yttria-stabilized zirconia

We have investigated the photoluminescence (PL) properties of trace amounts of Pr and Tb in single-crystal samples of yttria-stabilized zironia (YSZ), and found that Pr of the order of 10⁻⁶ mass% and Tb of the order of 10⁻⁵ mass% in YSZ can be detected by the PL spectroscopy. The PL spectra of the YSZ samples for the 280 nm excitation were comprised of several peaks and a broad emission. The peaks were attributed to transitions of Pr³⁺ and Tb³⁺ in the YSZ samples, whereas the broad emission seemed to be attributed to the yttria-associated oxygen vacancies. The peak intensities corresponded to the amounts of Pr and Tb in the YSZ samples, the amounts of which were analyzed by glow discharge mass spectrometry. In the PL excitation spectra, but not in the photoabsorption spectra, small peaks at 376 and 381 nm were observed, and were attributed to the transitions of Tb³⁺ in the YSZ samples. The results of the PL excitation spectra corresponding to the Pr³⁺ line emissions suggest that the charge transfer occurs between the YSZ and Pr ion in it. The trace amounts of these lanthanoids in YSZ would disturb the decay process of the photoinduced electrons to the yttria-associated oxygen vacancies.     

Acoustic characteristics of Ni–Nb–Zr–H glassy alloys by ultrasonic shear waves

The propagation characteristics of shear horizontally polarized (SH) waves passing through (Ni₄₂Nb₂₈Zr₃₀)_100–x H_x (x = 0–15.2) glassy alloys were investigated as a function of hydrogen content. With an increase in hydrogen content, the propagation time and main frequency of the receiving waves show increase and decrease, respectively, indicating expan‐ sion in average atomic distance which comes from solution of hydrogen. In sharp contrast to crystalline alloys, the decrease in damping ratio and the delay in phase with increasing hydrogen suggest a strong settlement of hydrogen into four‐coordination sites surrounded tetrahedrally by four Zr atoms and the resulting increase in dynamic elasticity, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Electroweak radiative corrections to the top quark decay

The top quark, once produced, should be an important window to the electroweak symmetry breaking sector. We compute electroweak radiative corrections to the decay processt→b+W ⁺ in order to extract information on the Higgs sector and to fix the background in searches for a possible new physics contribution. The large Yukawa coupling of the top quark induces a new form factor through vertex corrections and causes discrepancy from the tree-level longitudinalW-boson production fraction, but the effect is of order 1% or less form _H<1 TeV.     

Proper action on a homogeneous space of reductive type

Partially supported by Grant-in-Aid for Scientific Research (No. 63740074)     

Micro-phase sorbent extraction for trace analysis via in situ sorbent formation: application to the spectrophotometric determination of nitrite in environmental waters.

A micro-phase sorbent in situ formation from an aqueous solution was proposed for the sensitive spectrophotometric determination of nitrite in environmental waters. Nitrite in a 10 mL sample solution was converted into a cationic azo dye by the reaction with 4-trifluoromethylanilinium ion and N-1-naphthylethylenediammonium ion in an acidic medium. Addition of dodecylbenzenesulfonate ion caused the formation of a suspension of ion associate in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase that extracted the azo dye at the bottom of the centrifuge tube. The volume of the new phase was ca. 5 microL. After the aqueous phase was discarded, the organic phase was dissolved with 1 mL of 2-methoxyethanol to measure the absorbance. Nitrogen as NO2- at concentrations from 1.5 to 30 microg L(-1) was determined with sufficient precision. When 0.2 mL of 2-methoxyethanol was applied to dissolve the organic phase, 0.3-4.8 microg NO2--N L(-1) was determined. The recovery tests for nitrite added to some river water and seawater were satisfactory. This method is very simple and rapid. It takes only 30 min from the dye formation to the measurement of the absorbance.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007